PDA

View Full Version : engine/alternator/ignition noise


Zach Thomas
07-01-2003, 03:34 PM
I just finished installing polk 3560 6.5inch components in my wrx, and i'm having some noise/static/ticking/ in the right tweeter...

I was wondering how I can fix this and what filter I might need to buy...

I was wondering if Justin's wrx had any similar problems??

sntnsupermen131
07-01-2003, 07:20 PM
try moving and power cables or rca cables away from any power cables first...it might be as simple as that...you might need to get some better rca cables that are shielded better or it might just be a bad tweeter
-Cody

Jstas
07-01-2003, 08:41 PM
If only one speaker is making noise, it's a bad lead to that speaker. Either at the wiring harness splice or at the speaker. It could also be a wire pinched against a pinch weld that is causing a bad ground. I'd check the speaker wires and any connections between the speaker's source (i.e.: head unit, amplifier, crossover, etc...) before going and tearing apart the whole installation.

Josh
07-01-2003, 11:13 PM
Passive crossovers have been known to induce noise. Make sure they are not near any power wires.

PoweredByDodge
07-02-2003, 12:32 AM
if it turns out to be your patch cables (rca's) and u either 1) cant afford new ones 2) dont wanna pull up the old ones or 3) want a quick "half ass" fix...

you can wrap them in tin foil.. just leave em mounted and wrap the shit under the carpet in tin foil... oughta help a bit.

CPHILHOWER
07-02-2003, 08:19 AM
If you want to try a new patch cable. I have a 17' Scosche EFX Stealth series for sale. Only asking $15 USPS included. I have a pair of 12', however they may or may not be sold. The person who is interestd is away until 7/3. Dont know if he still wants them. Asking $20 for both. No knicks or damage. Almost new.
Chris
C.J.PHILHOWER@WORLDNET.ATT.NET

PBD, Guess what I have? Makes 60 watts. I've gotton Linear. He He He.

PoweredByDodge
07-02-2003, 12:58 PM
you bought a CB radio amp?

*Shaking head*

you're un-tame-able :)

what kind of range are you getting now????

CPHILHOWER
07-02-2003, 01:44 PM
its only a 60 watt. Havent tried it yet. CB brodcasts on what? AM or SSB? mounted it under the dash behind the radio. Using the switch I mounted for the Sub amp. now I can switch it off and on. Sub amp is turned on by the radio now anyhow. Aint I a sneak. Buried in the dash.
Chris

CPHILHOWER
07-02-2003, 04:56 PM
PBD, I just checked into the unit I have. Its a KLV60. Makes 25-35 watts. Not 60. Has a 5 amp fuse. Damn, saw it advertised as a 60 watt on a couple of sites. Maybe it will work for what I want.
Chris :(

sntnsupermen131
07-02-2003, 05:55 PM
dont quote me on this...and please correct me if im wrong...but i THINK the legal amount of watts your cb can put out is like 4w or something
so i would say 25 would give you a lot more than you think
does anybody know the legal limit...cuz now that i think about it 4 seems REALLY low...but i cant help but think its somewhere around there
-Cody

CPHILHOWER
07-02-2003, 06:08 PM
Yes, 4 watts is the Max Legal.
25 watts should more than double the range. I just want something to cut through the trees if needed. If you go to Big, You cause problems. Messing with TV reception and so forth.
Chris

sntnsupermen131
07-02-2003, 06:15 PM
lol....it wont be YOUR tv thatll be messing up...just a thought...
-Cody

PoweredByDodge
07-03-2003, 03:35 AM
i dunno if this applies, but do those linear amps have rms / max ratings? 30 rms = 60 max.... or if its 30 x 2 then thats 60 also -- prolly why u got mislead w/ the rating.


christ 6x the legal limit -- somebody's got a ballsy cb :)

CPHILHOWER
07-03-2003, 11:04 PM
Its weird. Since the install of the Amp, I dont hear the Fuel pump whine anymore. Theories?
Chris :confused:

Jstas
07-04-2003, 02:11 AM
You either broke a ground loop or, you fixed a bad ground. Either way, it's a good thing.