speaker wiring question

[mylimo]

I want to connect 2 center speakers to increase the imaging of the center. How do I wire them so to maintain the 8 ohm seen by the amplifier?

I'm running a Denon 5800 (upgraded)
Rti-12 Fronts
CS 400 Center ( I want to wire 2 of them together)
FX 1000 surrounds
Rt 25 Surround backs


Thanks for the input !

[sowen010599]

The 5800 is THX certified. THX certification requires it to run impedances down to 3.2 ohms per channel. Just wire 'em up. 4 ohms is fine.

[mylimo]

Would I be best to run a separate wire from the 5800 to the second speaker or the wire in series, etc?

[sowen010599]

Parallel, not series. Series will be 16 ohms. Basically you will run two wires to the + on the reciever for the center, and one wire to the + on both speaks. Same with -. Two 8 ohm speaks makes a 4 ohm load in parallel.