PDA

View Full Version : Polk RT25, RT25 and cs245 for sale!


nyudent
04-01-2005, 02:43 PM
Selling off my home theater system. All speakers are in excellent condition and are black oak. Im selling a pair of rt55's for $300, a pair of rt25's for $200 and the cs245 center channel for $150. Note that these are not the "i" version. I'm in the New York area and contact me to make a deal!

nyudent
04-01-2005, 02:45 PM
An added pic!

jdhdiggs
04-01-2005, 03:05 PM
So what are you buying instead?

nyudent
04-01-2005, 04:21 PM
I'm downsizing to mirage omnisats.

Vr3MxStyler2k3
04-01-2005, 04:36 PM
You might be surprised, those Mirage are awesome...

Anyways, FWIW - Those are not Oak, they are vinyl

nyudent
04-01-2005, 04:42 PM
heres a quote:
Real Wood at Vinyl prices - The first thing you'll notice about the RTiSeries is their luxurious real wood finishes: beautiful light Maple, inviting Cherry, and serious Black Oak (the RT15i, our small bookshelf speaker, is also available in white). What will really surprise you, though, is that you won't pay a premium for these distinctive real wood finishes. Because of our in-house, computer controlled woodworking factory we can offer these rich finishes at prices you'd normally pay for vinyl.


The "i" series are the exact same speaker except they dont use the trilaminar tweeter, have a slightly different x-over frequency and the cones are blue.

okiepolkie
04-01-2005, 04:56 PM
Actually, the RTxxxi series had the trilaminate dome tweeter. The RTixxx series switched to the silk domes.

The RTxxx series had vinyl cabinets. The RTxxxi series upgraded to veneer.

gshisme
04-01-2005, 07:09 PM
Damn, things sure are getting expensive around here.

robertgray
04-02-2005, 11:37 AM
Rt25i specs direct from the Polk website:

Mid/Woofer 1 - 5-1/4" Diameter (13.34cm) Dynamic Balance®, shielded
Tweeter 1 - 1" Diameter (2.54cm) Tri-Laminate, Dynamic Balance®, shielded
Overall Frequency Response 50Hz - 26kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 25kHz
Cabinet Size 11-1/8" H x 6-5/8" W x 10-3/8" D
Wood at Vinyl prices - The first thing you'll notice about the RTi Series is their luxurious real wood finishes: beautiful light Maple, inviting Cherry, and serious Black Oak (the RT15i, one of our smaller bookshelf speakers, is also available in white). What will really surprise you, though, is that you won't pay a premium for these distinctive real wood finishes. We offer these rich finishes at prices you'd normally pay for vinyl.
MSRP: $159.95 ea (US)


Rt25 specs from
http://www.smr-home-theatre.org/Reviews/Polk_4/

System Frequency Response, -3dB 60Hz - 23kHz
5¼" polymer/mineral composite Dynamic Balance® driver - shielded
1" polymer dome tweeter - shielded
Size: 11-1/8" H × 6-5/8" W × 10¼" D
Finish: black woodgrain vinyl over ¾" MDF (front and rear baffles - injection molded high density, mineral filled polymer)
MSRP: $139.95 ea (US)


Notable differences are the tweeter material, slightly higher upper freq response on the Rt25i, and cabinet.

I bought a new pair of Rt25i in 2002 for $140 ($70 ea). $200 a pair for the older Rt25 seems a little high.

Vr3MxStyler2k3
04-02-2005, 11:39 AM
The RT25 models sell for no more than 120 + S used, on good days - It has been a while since I've really kept track though...

But the RT35i sold for 150-200 or so + S...

EBay prices HAVE gone up...so ya know

greg099
04-12-2005, 06:37 PM
Is the Center channel speaker still available?

nyudent
04-12-2005, 07:29 PM
Ya but I would rather sell the whole set.

greg099
04-12-2005, 09:02 PM
sorry, dude, I'm on a bit of a budget. Any idea whether the cs245 is a good timbre match for monitor 10Bs? Got a picture?

nyudent
04-12-2005, 11:31 PM
sorry, I have no idea and dont have a pic of the center channel either.