dorokusai
03-13-2007, 08:42 PM
ROTEL RSP-976 5.1 Pre-Amp/Processor(2001) - 8/10 - Black - *SOLD* on Audiogon
If you want to start getting into seperates, here's a great start. I've been fascinated with Rotel gear for awhile and this is another great piece. The unit shares alot of things internally with the current RSP-1068. This also has the better remote control, RR-1050, that was offered in the later models. The RR-969 was a confusing remote IMO. 2001 and 2002 was a weird couple years for Rotel and remote controls. It has one scratch on the top, which has been touched up but the faceplate is perfect and the rest of the body is stellar.
If you're like me and love a simple 5.1 HT, step on over and let's take a test drive.
All my gear has been cleaned from top to bottom and connections have been treated with CAIG products. The unit will be packed to withstand an atomic blast. Thanks for looking :)
Features:
Dolby Digital, DTS, Dolby Prologic processing using the Crystal CS492604 Surround Processor.
Independent zone 2 control of audio systems.
Composite-video, S-video, and Component-video switching.
Digital inputs and surround modes are assignable to sources.
Discrete analog line drive stages, four layer military-spec circuit boards.
Intelligent on-screen display and backlit learning remote control.
External analog 5.1 inputs assure forward compatibility with DVD-Audio, SACD and others.
Specifications (Audio):
Frequency Response: 10-70kHz (± 0.3dB)
Harmonic Distortion: front < 0.006%; center < 0.006%; rear < 0.005%; subwoofer < 0.006%
Total Harmonic Distortion: 0.03% max.
IM Distortion: 0.03% max.
S/N Ratio IHF A (stereo): 92dB
S/N Ratio IHF A (Dolby Digital, dts): 90dB
Input Sensitivity: 200mV
Line Output Level: 600 mV (200mV Input)
Specifications (Video)
Frequency Response: 3Hz-10MHz (± 3dB)
Signal to Noise Ratio: 45dB
Input Impedence: 75 ohms
Output Impedence: 75 ohms
Output Level: 1 volt
Includes: Original power cord, RR-1050 remote control, original owners manual, reproduction remote control manual and some assorted documents from Rotel.
574679PSRR
If you want to start getting into seperates, here's a great start. I've been fascinated with Rotel gear for awhile and this is another great piece. The unit shares alot of things internally with the current RSP-1068. This also has the better remote control, RR-1050, that was offered in the later models. The RR-969 was a confusing remote IMO. 2001 and 2002 was a weird couple years for Rotel and remote controls. It has one scratch on the top, which has been touched up but the faceplate is perfect and the rest of the body is stellar.
If you're like me and love a simple 5.1 HT, step on over and let's take a test drive.
All my gear has been cleaned from top to bottom and connections have been treated with CAIG products. The unit will be packed to withstand an atomic blast. Thanks for looking :)
Features:
Dolby Digital, DTS, Dolby Prologic processing using the Crystal CS492604 Surround Processor.
Independent zone 2 control of audio systems.
Composite-video, S-video, and Component-video switching.
Digital inputs and surround modes are assignable to sources.
Discrete analog line drive stages, four layer military-spec circuit boards.
Intelligent on-screen display and backlit learning remote control.
External analog 5.1 inputs assure forward compatibility with DVD-Audio, SACD and others.
Specifications (Audio):
Frequency Response: 10-70kHz (± 0.3dB)
Harmonic Distortion: front < 0.006%; center < 0.006%; rear < 0.005%; subwoofer < 0.006%
Total Harmonic Distortion: 0.03% max.
IM Distortion: 0.03% max.
S/N Ratio IHF A (stereo): 92dB
S/N Ratio IHF A (Dolby Digital, dts): 90dB
Input Sensitivity: 200mV
Line Output Level: 600 mV (200mV Input)
Specifications (Video)
Frequency Response: 3Hz-10MHz (± 3dB)
Signal to Noise Ratio: 45dB
Input Impedence: 75 ohms
Output Impedence: 75 ohms
Output Level: 1 volt
Includes: Original power cord, RR-1050 remote control, original owners manual, reproduction remote control manual and some assorted documents from Rotel.
574679PSRR