how to do the trunk?

[eloplayspolo]

k im doing my amp rack/box and finishing all my final stuff before i connect my amp(as soon as mtx sends it back).

1st Question: i have the dynamat to do the full trunk, do i really need to do everything, or just slap down some big pieces in a few specific places.

2nd Question: to come, after a take a pic for u guys

[Deadof_knight]

they really big areas are whats important as they will do the most resonating , if your looking for a smooth finish in the trunk and your not covering the dynamat with upolstry of any kind a spray type lining will look the best.

[eloplayspolo]

its a brand new car i have the nice clean carpeting :)

[1996blackmax]

I used Secondskin Damplifier all through out my trunk, including the trunk lid. I am very happy with the results.

[eloplayspolo]

I already have my dynamat sitting in my garage, i didnt get to put it in my last car before i wrecked it.

[Petey2133]

I have never had good results with dynamat. (probably the application i used it with) Although i do appreciate a clean sounding system i would suggest building the amp rack over the subs and as usual facing them towards the trunk.

Good luck, and if you can, recess the stuff down where the spare tire would normally be. that always looks cool

[svg706er]

you mainly want to get the side panels, the trunk lid, the rear of the car, the tag, and whatever's left if you have enought dynamat left.

[vfx]

If you want to buy dynamat, get the full 9 sheets one. That'll cover trunks and front speakers

[exalted512]

Sell the Dynamat and get second skin or raammat.
-Cody

[diablo1]

you know dynamat is just going to deaden the flexing of any flat surfaces of the trunk WILL NOT prevent any rattles you have to pay attention to those rattles and see if you can either silicone / some dense foam ( do not use spray foam !! will squeek Under pressure and or buldge out quarter panels / trunk .. THE BEST WAY IS to port through ski hole / armrest / rear deck this will deffinatly increace you bass reflex 10 fold .......... then you would have to dynamat your cab instead of trunk and leave you some room in the trunk for amp rack ETC ................... Have fun !!!! oh and if your looking for a cheaper yet better replacement for dynamat look into HUSHMAT !! http://www.hushmat.com/

[bigaudiofanatic]

you know dynamat is just going to deaden the flexing of any flat surfaces of the trunk WILL NOT prevent any rattles you have to pay attention to those rattles and see if you can either silicone / some dense foam ( do not use spray foam !! will squeek Under pressure and or buldge out quarter panels / trunk .. THE BEST WAY IS to port through ski hole / armrest / rear deck this will deffinatly increace you bass reflex 10 fold .......... then you would have to dynamat your cab instead of trunk and leave you some room in the trunk for amp rack ETC ................... Have fun !!!! oh and if your looking for a cheaper yet better replacement for dynamat look into HUSHMAT !! http://www.hushmat.com/

HMMM worked for me in my trunk and also for the license plates as well.