BaggedLancer
11-11-2007, 03:23 PM
For those of you into the DIY sonosub and other subwoofers.....here is a car audio sub that can easily be used in a home theater system due to coil configuration.
From the manufacturer site:
Continuous Power Handling 1000 watts
Maximum Power Handling 2000 watts
Sensitivity (2.83 volts) 91.13 dB
Magnet Size 228 oz.
Mounting Depth 9.4"
Voice Coil Configuration Quad 1 ohm
Run it with dual amps, single amps...plenty of options
These seem to be going for $450ish new....the face of this one is really nice but the basket has some scratches from being mounted as you can see from the pics. All the coils were tested and verified at 1 ohm each.
I figure start at $280+ actually shipping and work from there?
Coke can not included......just a reference :D
From the manufacturer site:
Continuous Power Handling 1000 watts
Maximum Power Handling 2000 watts
Sensitivity (2.83 volts) 91.13 dB
Magnet Size 228 oz.
Mounting Depth 9.4"
Voice Coil Configuration Quad 1 ohm
Run it with dual amps, single amps...plenty of options
These seem to be going for $450ish new....the face of this one is really nice but the basket has some scratches from being mounted as you can see from the pics. All the coils were tested and verified at 1 ohm each.
I figure start at $280+ actually shipping and work from there?
Coke can not included......just a reference :D