View Full Version : LSI7 Wall mount question
02-16-2008, 11:02 AM
It says in the manual when you are wall mounting into drywall (not a stud) that you should "always use two wall anchors and two screws per speaker." But, there is only 1 keyhole slot on the back of the speaker. So where does the second screw go? What am I missing???
02-17-2008, 03:42 PM
I used a pair of these with my LSi7's. (http://www.crutchfield.com/App/Product/Item/Main.aspx?g=15830&i=121BT77B&search=bt-77&tp=586) The bass sounded boomy to me when hooked up with the keyhole slot on the back.
Sorry - no good answer about the dual screws. Personally I would not wall mount them with a single screw unless it was into a stud though.... Hope you find a good solution.
BTW - Click the quote in my sig to go to my showcase. You can see picks of the 7's mounted on the stands there.
02-18-2008, 02:53 AM
+1 to Michael's recommendation (bought mine from a local polkie). Sorry, no idea where you would put a second screw on the back of the 7's.
02-18-2008, 06:43 AM
You can mount them single screw allday. use High quality dryall anchors and your fine. Use # 8's or #10's. They sound fantastic. Run then in small cut at 60 or 80hz and away you go. No stud is requuired.
06-18-2008, 11:57 PM
i'm just wondering how far off from the carpet should i place the lsi7 on the wall? i just brought a pair and thinking to hang it up...
06-19-2008, 12:59 AM
~2 to 3 feet above ear or ~6' above carpet
Powered by vBulletin® Version 4.1.6 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.