I want an SR104!

[ZRide]

My dilemma is that I can't find a pre-fab box that will it will fit in. All of the ones made for my car - 350z - don't have the required 7" depth. I am going to be stuck getting a JL3W3 which I don't think is a bad sub but I'd rather have the SR to match up with my SR6500's up front. I wish the sub wasn't quite as deep. Building my own enclosure is out of the question. I gotta figure another way to do it. Any ideas?

[greg2350]

Yep friend of mine has a 350 z same problem boxes arent deep enough did find this.
http://www.lightav.com/car/boxes/bassforms/nissan350altima.html

[greg2350]

http://caraudiofactory.com/20032007-nissan-350z-single-p-251.html
you could add a 3/4" mdf ring to this one to give you the depth just an idea.:)

[ZRide]

Thanks greg. The fiberglass box is nice but too flashy. I want more of a stealth look. The understrut would work but I dont think it would look right with the 1" ring around it. My options are limited but theres gotta be a way to get one in the hatch area. My only other option is getting a custom fiberglass corner box made but that'll cost bucks. there is a guy who makes them but the size is smaller than the required. Do you think I can get away with .5 sq ft area space for the SR104? I guess that is not even counting the volume that the woofer takes up. So it would be like .375 sq ft. Pretty small, huh?

[MacLeod]

You could run down to your local shop and see what they could whip up for ya. Im sure they could come up with something that would fit.

[ZRide]

Is there anyone on here that can build one for me? Possibly local to Vegas? If not I can shipping costs. I want this sub!! I'm thinking a custom fiberglass corner box with the right depth may do the trick. My SR6500's will be lonely without this sub. :(

[brettw22]

Building my own enclosure is out of the question. I gotta figure another way to do it. Any ideas?I don't know your particular situation, but I built my own boxes while living in an apartment. I basically gave the dimensions to a shop, took them the MDF sheet, and had them cut out the pieces (for ~$80) and then I put them all together and did the assembling and carpeting myself. It's really not all that difficult.............

[MacLeod]

Is there anyone on here that can build one for me? Possibly local to Vegas? If not I can shipping costs. I want this sub!! I'm thinking a custom fiberglass corner box with the right depth may do the trick. My SR6500's will be lonely without this sub. :(

Dude, go to your local car audio shop and talk to them. They can easily build you a box designed to house the SR sub specifically and fit precisely in your car.

[black magic]

You can always mount the sub with the basket hanging out... I don't know if you'll have enough room, though.