View Full Version : My new subwoofer!
Vr3MxStyler2k3
03-13-2008, 10:06 AM
http://us.st11.yimg.com/us.st.yimg.com/I/bizchair1_1991_2822282177
Got those with silver hardware, black shelves...
http://www.bestpricemounts.com/pcimages/products/extra/fst-1.jpg
High gloss black...
Going to break up the stand into 3 sections, the top two racks for the amps - one on each side... the middle rack for the preamp and CDP...
Then the two shelves on the TV stand for the XBox and DVDP
Should look trippy
SolidSqual
03-13-2008, 10:09 AM
That's a great product. I own the TV and Amp stand versions.
janmike
03-13-2008, 10:16 AM
Nice Trey. I purchased the identical one but with 4 legs. The rich cherrym black tubes and silver caps is a real nice effect. After filling the tubes with LS it is very solid.
Vr3MxStyler2k3
03-13-2008, 10:22 AM
Glad to hear those are good stands, they looked pretty solid...
I was going to buy amp stands... but then I saw I could buy that which is the price of two amp stands... lol... so why not? lol
janmike
03-13-2008, 10:26 AM
If I ever went for Monos I would by the amp stand as well. It actually is the smaller stand.
Vr3MxStyler2k3
03-13-2008, 10:29 AM
Yeah
I am going to use the 7" stands for my monos and the two bottom ones for the pre and CDP....
My amps are so huge, the 7" stands will probally look better than the 3"
stereo_luver
03-13-2008, 10:40 AM
Nice Sub.
Chuck
engtaz
03-13-2008, 11:02 AM
Sub????????????????????????????? Looks like a stand to me. I guess I missed something.
engtaz
hoosier21
03-13-2008, 11:09 AM
the thread title is "my new subwoofer"
tryrrthg
03-13-2008, 11:43 AM
Why not just hang the TV on the wall? $25 wall mounts at monoprice...
Vr3MxStyler2k3
03-13-2008, 11:56 AM
Window!
Trust me, thats what I want to do!
SolidSqual
03-13-2008, 11:58 AM
Window!
Trust me, thats what I want to do!
Just tell your parents you need to remodel the house and tear down a few walls.
Vr3MxStyler2k3
03-13-2008, 12:04 PM
Tried that...
My Mom said "Boy you must be crazy" with a roll of the head and a snap of the finger. That was that. ;)
Vr3MxStyler2k3
03-13-2008, 12:08 PM
Here we go...
The new Vr3 Theater!
Speakers and a TV, nothing else! NADA!
treitz3
03-13-2008, 07:07 PM
Um, dude....what is the depth of that rack? Measure from the back of the support to the tip of the shelf in front. I'm thinking your mono's are not gonna fit. They may be 19" deep [didn't read the spec's], but if the monos are like my amp [with the PC that plugs in at the middle rear backplate], you won't have room for the PC unless you bend the shit out of a stock cord and have the front of the amp hanging off.
Just checking before it's too late.
dorokusai
03-13-2008, 07:10 PM
All those cables are embarrasing.
Early B.
03-13-2008, 07:13 PM
Um, dude....what is the depth of that rack? Measure from the back of the support to the tip of the shelf in front. I'm thinking your mono's are not gonna fit. They may be 19" deep [didn't read the spec's], but if the monos are like my amp [with the PC that plugs in at the middle rear backplate], you won't have room for the PC unless you bend the shit out of a stock cord and have the front of the amp hanging off.
Just checking before it's too late.
Yeah, and if it's not too late, I'd like to add something else. I have the same rack. It's very nice for the price. However, if I had to do it over again, I'd get the four-legged version because I've nearly tipped over components on individual racks because the three legs don't support the back ends of the rack, so each rack tends to be unsteady towards the back due to uneven weight distribution.
NotaSuv
03-13-2008, 07:19 PM
wow i have never seen that model sub before....looks just like a stand.....:)
Vr3MxStyler2k3
03-13-2008, 07:30 PM
20 3/8" deep...
I don't plan to have them to close to the wall so I will be good...
Will look much better - indeed
treitz3
03-13-2008, 07:57 PM
You should be fine with the stock cord slightly crammed, but don't ever plan on upgrading the PC. The stock PC takes at the very least 2" [crammed] to come out of the IEC socket and curve which puts you at 3/8" to play with.
speakergeek
03-13-2008, 08:08 PM
I must be missing something here...
treitz3
03-13-2008, 08:11 PM
He's on some good drugs today, don't mind him......there is no new sub woofer.
He's talking about his rack.
Vr3MxStyler2k3
03-13-2008, 08:19 PM
Im actually using an upgraded PC --
Monster Powerline 300 - twice as thick as the stock one..
But Im breaking up the rack...
Will be kind of like this...
Amp stand | preamp/CDP | amp stand (breaking the rack up into 3 section)
And the TV stand will be behind the preamp/cdp
But yeah, plan to have the amp stand stand like 30 or so inches from the back wall... which will give it 10" of clearance
I am joking about the subwoofer as I sold my subs to get a new rack
treitz3
03-13-2008, 08:23 PM
N/M gotcha, you are getting both. Cool deal!
stereo_luver
03-13-2008, 08:59 PM
Here we go...
The new Vr3 Theater!
Speakers and a TV, nothing else! NADA!
LOL...looks like a bad night at my house when the cops came....story to follow...
Chuck
stereo_luver
03-13-2008, 09:00 PM
He's on some good drugs today, don't mind him......there is no new sub woofer.
He's talking about his rack.
you better share this weekend Mofo....LOL
Chuck
stereo_luver
03-13-2008, 09:01 PM
I must be missing something here...
smoke 2 and get back to the thread...it will all make sense then.
Chuck
appadv
03-14-2008, 10:27 PM
You need an upgrade of acoustic panels ;)
tecmo04
03-15-2008, 10:18 AM
i bought the vti rack a little bit ago. holds all my stuff great! filled the legs with sand and looks great too! It was worth the 220 dollar investment!
Vr3MxStyler2k3
03-15-2008, 12:43 PM
The TV stand arrived yesterday...
Sounds 100 times better. Far more detailed and open.
Bass response is pretty surreal.
Bingo was his name-o...
Only down side is I will have to order another amp stand, as I dont think one from that rack will work...
Ricardo
03-15-2008, 01:00 PM
That's exactly the VTI I have; light and solid.
Vr3MxStyler2k3
03-15-2008, 01:56 PM
I used my Transformers as cable risers, I rock!
appadv
03-15-2008, 07:47 PM
I used my Transformers as cable risers, I rock!
You just need to add magic pebbles. ;)
Seriously, why don't you experiment with some different acoustic treatments?
vBulletin® v3.7.2, Copyright ©2000-2008, Jelsoft Enterprises Ltd.