MIT Terminator 2 Speaker Cables-DEMO

[Ricardo]

This demo consists of two pairs of cables:

1 Pair of old MIT Terminator 2 speaker cables (8 ft, spades both ends).
1 Pair of MIT Shotgun S3 RCA interconnects (1 m).

The terminators are mine and the Shotguns belong to Ted (reeltrouble1). We are offering these for polkies to demo in their homes with their systems. These cables are expensive so if you want to participate you need to follow some rules:

-You must have positive feedback from transactions in our flea market, and participate regularly in our club for at least 6 months. All applications will go through approval from Ted and me :)
-You'll have to pay for shipping (and packaging if needed) when you send them to the next in line, with insurance as follows:
Terminators: $200
Shotguns: $400
Signature is recommended
-If there's any damage or cables are lost, sender will need to lead and follow up the claim with the carrier.

You can choose to opt out from the Shotguns; in this case the Shotguns will be sent to the next in line, and stay there until that person receives the Terminators.

Process:
-Demo will last no more than 4 weeks.
-Sender owns coordinating communications with the next in line (request address, check if SHotguns will be included, and if not, get address from the next....)
-Name in bold means cables are either on their way or in his/her possession.
-Ted and I want to be informed (via PM) when the cables ship, and when they are received.
-It would be great that once you are done, you post a short review here, saying if you found any differences with other cables, be it better or worse.

Here's the list:

Baggedlancer
Ern Dog
MillerLiteScott
heiney9
SKsolutions
acsubie
phuz
phipiper10
strider
disneyjoe7
nikolas812
pearsall001
ben62670
McLoki
TNRabbit
Lasareath
amulford

[Lasareath]

LOL, That's a funny one!

$10,000 deposit! LOL

[Face]

Not in, but very cool of you.

[treitz3]

All those who swear they don't hear any difference....here's your chance to step up to the plate and get a listen on. What a great opportunity too. All you have to do is pay shipping to the next in line?

Ricardo, not in 'cause I just picked up a pair from Mr. assless chaps but that's an awesome deal. Some folks will really appreciate this. ;)

[danger boy]

not in.. none of my amps can use a spade.. weird i know.

[Tomasito]

Does an MIT terminator cost 10,000? I think you are joking?
The MIT magnum speaker cables cost $8,000, which is lower to the top of the line Oracle.

BTW, as of this writing.... there is a MIT terminator 2 (12 feet) pair speaker cable in ebay with a buy it now for $250.00!

[dorokusai]

not in.. none of my amps can use a spade.. weird i know.

They use ICONNS which means they can be used wih Bananas or Spades. That's the ones you have right Ricardo?

[Ricardo]

No iconns; these have fixed spades.

And no, they don't cost $10,000.

[avguytx]

Damn....I hope a $10,000 pair of speakers come with a happy ending! :D I'd love to try them but everything I have takes banana jacks and I don't know if I can get a spade to work or not.

[dorokusai]

No iconns; these have fixed spades.

And no, they don't cost $10,000.

Oh ok, I thought it was a later Terminator series or AVT.....I'm a simple man, please don't yell at me Ricardo.

[BaggedLancer]

These are great cables, and as soon as Ricardo sends me a PM with an addy off they go to the next person. Turns out in order for my rig to get the synergy it needed, I had to switch to silver cables, otherwise these would have found a permanent place in my rig.

[dorokusai]

This is an opportunity to try something new. If you don't want to try it, move along. I soft deleted the comments ONLY to keep it on track, not because it was anyones fault....just relax.

[Ern Dog]

I'd like to give them a listen, put me on the list. It will be interesting to see how MIT cables compares to my Signal Cable Classic speaker cable.

[MillerLiteScott]

Ricardo,
I need to try these. I started a PM before but I deleted it.
I do not want to. But I know I need to try something better than the crap I have now.

Scott

[F1nut]

But I know I need to try something better than the crap I have now.

Scott

Agreed :)

[dorokusai]

Yea, what he said. When you want to upgrade Scott......I have everything you need :)

[Ricardo]

See first post for "Process".

Kepp the names coming.

[heiney9]

Ricardo, cool idea put me on the list please :). Maybe if this is successful/enough interest I will use the same idea with Ben's silver cables I won in a karma thread.

H9

[Ern Dog]

These are great cables, and as soon as Ricardo sends me a PM with an addy off they go to the next person. Turns out in order for my rig to get the synergy it needed, I had to switch to silver cables, otherwise these would have found a permanent place in my rig.

PM Sent today!

[SKsolutions]

In behind H9 please. I'd be interested in the silvers too if that comes to pass.

[acsubie]

put me on the list please...

[Ricardo]

Cool. Cables already started moving.

Keep those names coming.

[dorokusai]

I have quite a few names I would like to call you Mr. Fancy Pants.

[Ricardo]

Fancy? Just because they are not assless like yours????

[dorokusai]

Don't be hatin'.

[amulford]

Great chance to step up, folks. Whaddaya got to lose???

I might like to get in on this. I wanna compare the performance against some Shotgun 3's.

[phuz]

In. Been wanting to try MIT stuff for a while now.

With Love,
Kimber Fanboy

[phipiper10]

I'd love to give these a try.

Thanks for adding me to the list.

[Ricardo]

On their way to MillerLiteScott now. Let's make that list longer!!!

[strider]

What the heck, can I sign up?

[disneyjoe7]

Love to try them out IN :) Lets hear what's all the fuss is about ;)

[Ern Dog]

I just finished a 3 week demo with these MIT 2's and want to share my impressions. I noticed an immediate difference compared to my Signal Cable Classic speaker cables. With the MIT's the higher frequencies were more forward and they sounded brighter than what I'm used to. Very detailed. For HT applications this was awesome and enjoyable. I prefered them over SC. For music I found some peices too bright for my preference. By the end of the three weeks my ears had adjusted and they didn't seem as bright as they did at the beginning.

Doing this demo was the best because I got to try out some new cables and expand my experience without having to purchase anything. Great idea Ricardo- thanks again.

[MillerLiteScott]

I am loving these MIT speaker cables. I had been using some AQ Type X speaker wire that Tweeter sells. The difference was very noticeable from when I first put them in my system. The over all spectrum is improved with a noticeable improvement in my soundstaging, seperation of instruments and vocals. There is a noticeable improvement on the depth of soundstage also.

To sum it up in a nut shell my system now sounds more natural and realistic. There seems to be a great synergy between Musical Fidelity, MIT cables and Vintage Polk speakers.

My next goal is to purchase some MIT speaker cable. I am thinking the Shogun Type 3 and hoping they will work just as well.

My plan if it is OK with the others in line is to ship them to the next lucky person @ the first of July.

I will post more thoughts then if I have any more to ramble about.

Thanks again Ricardo.

Scott

[Ricardo]

That's great Scott; I'm glad the demo was useful for you. I have the Shotgun 3, and there's a very noticeable difference between them and these old demo wires. You'll be happy if you get them.

We need more names on the list!!!!

[heiney9]

I am in possession of these currently. I had forgotten I signed up and was pleasantly surprised when I got them.

I have been listening to them the past few hours and right out of the box I notice a bass emphasis. Haven't determined if that's good or bad yet. My system has never wanted for proper, well defined bass. Also the SDA properties are much more apparent on some songs and the MIT's seem to separate the instruments/singers a bit more.

Just some initial off the cuff impressions, more to come as I compare and demo :)

H9

[disneyjoe7]

I'm afraid when I get these I'm going to like them and I'll what a pair myself. :)

So just to be prepared for the shock what's the street price for these? ;)

[heiney9]

I'm afraid when I get these I'm going to like them and I'll what a pair myself. :)

So just to be prepared for the shock what's the street price for these? ;)

I'm looking on Audiogon right now and there is a used pair for $150 8ft/pr also a used pair at Usedcable.com for $395 for a 20ft/pr. Not sure on the original retail but I'd guess $550 for an 8 or 10ft/pr.

H9

[disneyjoe7]

Ok I can afford that bring them on.

[heiney9]

Ok I can afford that bring them on.

Wait your turn :p:D. Maybe you'll forget like I did and be surprised!!:cool:

[disneyjoe7]

I'm pretty down on the list, they will be either be MIA, or just say broken in.... Or just BROKEN. :(

Anyone mind if a jump up in line. BTW I love shipping to Canada ;)

[nikolas812]

Ricardo

We need more names on the list!!!




Ummm. OK.

Count me in.:)

I don't know where I was when this thread started but I'm glad I found it if its not to late.


Awesome deal Ricardo! I was just looking a MIT speaker cables yesterday.


Nick

[disneyjoe7]

$550 new WTF?????????????????????????????


What was this $10k deposit I needed to Paypal over to Ricardo?

[disneyjoe7]

Ummm. OK.

Count me in.:)

I don't know where I was when this thread started but I'm glad I found it and its not to late.


Awesome deal Ricardo! I was just looking a MIT speaker cables yesterday.


Nick



Nick,


Is INDIANA now part of Canada? I only send to Canada members ;)

[pearsall001]

Count me in Ricardo. I just sent you a PM asking you to put my name on the list. Thanks.

[MillerLiteScott]

There is a funny story how H9 received these MIT cables. It was my mistake but it all worked out.

I am currently burning in my new pair of MIT Shotgun S3s speaker interface cables. Thes cables are very impressive in person much more so than what you see on the internets. They are more than "speaker wire' hence their "speaker interface cable" designation. Construction is MIL spec. if not better and yet they are still flexible enough to go around corners etc.

I ordered mine from Joe Abrams on A-gon. Top notch CS and communication.

I will have to post my listening findings later because they are still burning in which MIT calls 2 and 2. 2 days of burn in to get to 75% and 2 weeks to 100%.

Scott

[heiney9]

I have to say these are very engaging cables. There is a crispness to the upper frequencies that is quite addictive w/o being harsh or strident or grainy. The hi-hat and other cymbals have a sparkle to them I notice more and more. The bass on certain songs can be just a tad overdone, but nothing to complain about.

I'm enjoying these and it's going to be hard to let them go. ;)

H9

[Ricardo]

Glad to hear you're enjoying them. Maybe the bass wasn't "true" before ;)

[Ricardo]

I'm pretty down on the list, they will be either be MIA, or just say broken in.... Or just BROKEN. :(



I just hope that's not the case.... :rolleyes::rolleyes:

[Ricardo]

There is a funny story how H9 received these MIT cables. It was my mistake but it all worked out.

I am currently burning in my new pair of MIT Shotgun S3s speaker interface cables. Thes cables are very impressive in person much more so than what you see on the internets. They are more than "speaker wire' hence their "speaker interface cable" designation. Construction is MIL spec. if not better and yet they are still flexible enough to go around corners etc.

I ordered mine from Joe Abrams on A-gon. Top notch CS and communication.

I will have to post my listening findings later because they are still burning in which MIT calls 2 and 2. 2 days of burn in to get to 75% and 2 weeks to 100%.

Scott



Scott, tell us how are you liking your S3's. It would be interesting to hear a comparison between them and the old demo wires.

[heiney9]

I just hope that's not the case.... :rolleyes::rolleyes:


FYI, I will be keeping these for the full 3 weeks. I just haven't had as much time as I would like to demo them. I am watching and considering pulling the trigger on a pair on Audiogon. I really need to spend a bit more time with them.

I plan on mailing these out to SKsolutions on Monday the 11th. If I wasn't so sure these would be on my short list I'd let them go a little earlier but I want to make sure these are "worthy". Thanks again Ricardo for doing this.

H9

[Ricardo]

Hey Brock, no one will complain if you keep them one more week ;)

[SKsolutions]

I can shorten up my time, I'm cool with that.

[disneyjoe7]

Where I'm on this list :eek:

Ok inside poll will DisneyJoe7 / Steve buy a pair before his turn is up?

A.) YES

B.) NO

C.) Hell no he's way too cheap.

D.) No his mind would try to reverse engineer them to build his own and turn around to sell his "New Idea" to China. ;)

[Ricardo]

I ordered mine from Joe Abrams on A-gon. Top notch CS and communication.



You can say that again; I contacted him because I'm going balanced from source to amp; well, he's taking the RCA S3's I bought from him back in January as trade in..... for 90% of what I paid!!!!!

You don't see this kind of service too often.

[heiney9]

Sorry guys very long weekend and I just didn't have time this morning to get these packed up properly and sent out. They should go out to SKSolutions by tomorrow or Wed. at the very latest.

H9

[ben62670]

May I be added to the list?
Thanks
Ben

[Ricardo]

May I be added to the list?
Thanks
Ben


Sorry, but the list is closed.


I CAN'T EDIT!!!!!!!

[ben62670]

Damn that web manipulator!

[Ricardo]

Ha ha; I need to check with him. Consider yourself next after pearsall001.

[ben62670]

Thanks. I will be able to do a comparison between highs, and lows. I am very excited.
Thanks again
Ben

[engtaz]

By the way, Richardo, very very nice gesture on your part. Cool

engtaz

[heiney9]

I'm going to be moving in about 6 weeks and I'd like to try these again in a different environment. So add me at the very end for a repeat demo after all have had a chance. Unless you are selling these soon Ricardo. I am intrigued by these cables I just feel with my current set-up they might be a tad bright, not fatiguing, but a tad bright.

H9

P.s. getting ready to box these up.

[Ricardo]

You got it Brock; as soon as I can edit.

[heiney9]

I miss these already :p. They are packed and ready to go.

The amazing thing to me is even in my modest system I can hear such a difference between cables.

Currently I'm using a pair of IXOS cables with sturdy banana plugs on the end and they really sounded good compared to some others I've tested. The MIT's certainly take it to another level. The bass is much more solid and the highs have a crispness and air around them that I like very much. The sound stage has opened up even more especially the depth and separation between instruments and singers.

With this hobby I have tried hard to stay on a strict budget because I really do enjoy my system, but it's times like this where I now know if I splurge and spend some serious $$$ on cables they will make a positive difference.

I still need to figure out if the "extra" bass from the MIT's is some sort of slight coloration or if it's the "real" thing. Time to do some extensive research on the MIT network box.

Seriously Ricardo, let everyone who wants; have a chance. Since these are now on my short list, I'd like a shot at them again in a new environment to see if I come to some of the same conclusions. I'm in no hurry since it will take some time to settle in to the new place and start some different impressions of my current system in a new listening environment.

Ricardo, what should I insure these for? I'm paranoid now after UPS screwed the pooch on my LSi 7's. I almost feel as if I should make these "signature required" as I'm responsible for them until they reach SKsolutions.

H9

[Ricardo]

I miss these already :p. They are packed and ready to go.

The amazing thing to me is even in my modest system I can hear such a difference between cables.

Currently I'm using a pair of IXOS cables with sturdy banana plugs on the end and they really sounded good compared to some others I've tested. The MIT's certainly take it to another level. The bass is much more solid and the highs have a crispness and air around them that I like very much. The sound stage has opened up even more especially the depth and separation between instruments and singers.

With this hobby I have tried hard to stay on a strict budget because I really do enjoy my system, but it's times like this where I now know if I splurge and spend some serious $$$ on cables they will make a positive difference.

I still need to figure out if the "extra" bass from the MIT's is some sort of slight coloration or if it's the "real" thing. Time to do some extensive research on the MIT network box.

Seriously Ricardo, let everyone who wants; have a chance. Since these are now on my short list, I'd like a shot at them again in a new environment to see if I come to some of the same conclusions. I'm in no hurry since it will take some time to settle in to the new place and start some different impressions of my current system in a new listening environment.

Ricardo, what should I insure these for? I'm paranoid now after UPS screwed the pooch on my LSi 7's. I almost feel as if I should make these "signature required" as I'm responsible for them until they reach SKsolutions.

H9

Good question on the insurance; just go with $100. I think that's the included coverage with UPS, Fedex, etc...... isn't it?

On the network box, those old ones only have an inductor on it. I know because one came apart when I got them. I understand the new ones have more components.

[Ricardo]

Our friend Dorokusai made the updates to the first post. Thanks Mark. You're better than my secretary. She's more cute though.

[disneyjoe7]

Was there a dress involved?

[reeltrouble1]

OK guys, this thread has tickled my better side and is a definite throwback to a time when the Club Polk Nation was being built by Polkies helping Polkies.

I am going to coordinate with Ricardo to keep this demo running smoothly and running in order, what I am going to do is add a set of Shotgun S-3 1meter interconnects to the demo. These are my personal cables. In order to participate in this demo you will need to be participating in the Terminator 2 speaker demo. You can run your rig with each set individually and then together or what have you, you will need to know the input impedance of the piece of gear receiving the signal as these cables have a simple switch to adjust them to fit your gear.

Again you must participate in the Terminator 2 demo and you must post in this thread about your experience. Everything else would be in line with what Ricardo is doing and of course I reserve the right to have the cables sent where and to whom I want. The person doing the demo will be responsible for shipping costs and insurance for 400.00 for this set of interconnects when sending them to the next person. If you do not want to demo them then let the person sending you the Term 2 know and these will go to next person who will hold them until they recieve the Terminator 2 and complete there demo. Please keep me advised of where the cables are and who has them.

I will need the addy to send these to the member who is getting the Term 2 from Brock.

RT1

[disneyjoe7]

Crap ;)


What do you guys what my check directly deposited in your account.

[Ricardo]

Stop complaining Steve....:)

Ted, that is a wonderful idea. One thing I learned in my MIT journey is that there is some synergy and added benefits when using both their IC's and speaker cables. Shotgun S3 is what I have in my system and it seems they will stay.

I think that everyone should try both; the insurance requirements will make shipping a bit more expensive, but it will still be the cost of a couple lattes.

Mark, I hope you are reading so that you can update the first post ;)

[heiney9]

Great Idea Ted!! I'll catch up on the back end when I get my 2nd shot at Ricardo's cables after everyone has had firsts.

Ricardo and Sean the cables went out today and I sent the tracking number via PM.

H9

[Face]

MIT Shotguns are great cables, I use the S2's in my SDA rig.

Very generous of both of you!

[MillerLiteScott]

My MIT Shotguns S3's have burned in quite nicely. They are quite a step above the Terminator 2's. I highly recommend the Shotgun S3's. They are a very sonically balanced cable IMO. I have plenty bass now compared to my previous AQ speaker wire and the top end is just so smooth. Sound stage is wide and deep.

MIT SHotgun S3's made even more of an improvement than redoing my crossovers with Sonicaps and Mills resisters, and that is saying a lot.

You will not be dissapointed.

Scott

[McLoki]

Not sure why I just saw this thread today - but please put me in if possible.

Thanks,

Michael

[SKsolutions]

Cables arrived in good shape. I'll get them in tomorrow. Thanks all.

[reeltrouble1]

SK,

Shotguns are away and headed to you. Fedex said about three days.

Enjoy.

RT1

[Ricardo]

Good. Having that pair will make for a great demo.

TO ALL THOSE IN THE WAITING LIST:

Make sure you go back to the first post to see the added requirements on insurance.

[reeltrouble1]

FYI-- South Ga. to Ma., Fedex, with 400 insurance was 12.50 American.

RT1

[PolkClyde]

What's wrong with monster cables........ hahaha I have MIT cables on my Rig as well. I wish I could participate in this demo.

[SKsolutions]

Both sets should be going out Monday 9/7 to Ascubie. I'll PM all parties. Thanks Ted & Ricardo!

[acsubie]

forgot i signed up for this, can hardly wait

[acsubie]

MIT speaker cables and ICs are now in my possession and being tested in my rig

[PolkClyde]

What are the results of this speaker/interconnect test...did I miss the Thread with the results..... should I go out and buy these or will my old radio shack cables would suffice.

[TNRabbit]

Is it too late to get on the signup list?

[heiney9]

What are the results of this speaker/interconnect test...did I miss the Thread with the results..... should I go out and buy these or will my old radio shack cables would suffice.

There are a couple reviews (mine incl) in this thread. And yes, they are far better than the RS cables and far more expensive.

Of course YMMV ;)

H9

[SKsolutions]

I'll try to make this readable and coherent. . . . not a strong point of mine. I did not have a huge amount of time with these, because I got real busy on a project (I posted some project pics in the picture thread, so I hope that gets me of the hook a bit). I have some mid-fi gear, in an medium sized room, with above average room acoustics. It's the original lathe and plaster from 1930, with the 8.6' ceiling being sheetrock. It's open at the back to a central landing so that the front wall will pressurize, and no reflections come from the rear. Very limited standing waves. The speakers are 4' out from the wall, and 3.5' from the sidewalls with 8' of separation. Seating is 9' from speakers.
Gear > Cable:
Cambridge 540v2 player> Ben's silver IC
B&K ST1400mkII amp> 1m AQ Copperhead
HK pre> 1m AQ Copperhead
Polk LSi9's, 31" stands> AQ Type 4

Above gear and cables with Terminators in the speaker postion
The speaker cables came first, and I got them right on, and gave a listen. They were replacing the AQ type 4, which replaced a Canare. I was immediately aware that there was more top end. I let them play, and went to work.

Pro: Bass was as good. Top end was superior. Stage was larger. I loved the sparkle without any glare, and the extension that these had.
Con: Some midrange drive was missing. The sound was there, and it seemed to be neutral, but some energy seemed to be missing. It's like the curve followed, but the amplitude didn't track for this certain frequency. I would hear the notes, but not feel them as much- if that helps. Also, for whatever reason, with the associated gear, I got listening fatigue for the first time. If you note, all the gear is on the 'warm' side, except the CA player.

Shotguns in pre to amp position, all others as listed above

When I unpacked these, I was impressed. Great build. All the cables remained as listed above.
These had the similar top end extension that the Terminators had, but it was a different flavor. The bottom end was steady and articulate, and overall it seemed to be very balanced and flat. The soundstage seemed to widen, but I lost some reference to center, which, when combined with the higher extension, localized the 9's more in the room. There was a small amount of detail retrieval with these that I didn't get with the AQ cable.
If I'd had more time with it, I would have tried repositioning the speaker to see if I could have made it work better in my room. As positioned, and even with the extra detail, the AQ gave me more of what I wanted and how I wanted it.

Together
I then tried them together right before I had to ship them out. They do play nice together, but I still got some fatigue. I wouldn't assume that it's the speaker cable. It may be a combination of the room, gear, and cables. I have some silver in the system as well, and CA players aren't all that forgiving.

To sum up. I dug them both, but would not be able to keep the Terminators without changing other things as well. The Shotguns, I think, gave me a better idea of what their 'house' sound is.

In the end, and for now, the AQ and BWaudio cables stay. When the amp and pre are changed out this fall/winter, I may try this again. Solid core sounds better to me right now, and may be hiding some of the weak points.:)

Thank you Ricardo, Ted, and all those that come before and after me on the list. It's been very cool.

[Ricardo]

SKsolutions, thanks for taking the time to write that review.

TNRabbit, we will put you in the list.

I'll ask Mark to edit the first post....damn this no editing thing.

From now on, wnyone that wants to participate will need to have at least 6 months of active participation in the forum.

[acsubie]

my testing time is coming to an end and i will contacting the next person in line to arrange shipment by the end of the week

[acsubie]

i still have these in my possession, found out that "amulford" lives about 1/2 hr from me and to spare the hassle of shipping such an expensive item(s) that is not mine we arranged a 1/2 way pickup, unfortunately he was busy today when we were suppose to meet so he will keep me updated on when has spare time this week so we can arrange pickup/deleivery

[acsubie]

well "amulford" and I were suppose to meet up again this weekend again to arrange a pickup of the wires, he was unable to work in a pickup to his busy schedule so he advised me to just ship these to the next person in line, i will be contacting them today and arranging shipment same day since these have been boxed up and ready to go for the last few days

[acsubie]

shipped today and in route to"phuz" in texas

once again thanks for giving me the opportunity to test MIT

[heiney9]

Ricardo,

When you get a chance you can take me out of the rotation. I have my own set of Terminator II's now.

Thanks

H9

[Ricardo]

Thanks for the update acsubie.

Brock, let us know how those newer MIT's compare to the demo pair.

Anthony, do you want to be palced next in line after phuz?

[phipiper10]

Believe I follow Phuzz in the list if that's still ok. This is coming at a perfect time for me. I've got no money but getting a new demo at no charge is perfect.

I look forward to hearing them and giving some feedback. I've passed on my addy to phuzz.

Thanks!
Rich

[phuz]

I've gotten the PMs, and am keeping an eye out for the cables. Looking forward to this! Thanks!

[Ricardo]

Rich, yes you do follow Phuz. Anthony (amulford) was in line before phuz but he could not take delivery, so that's why I am asking if he wants to go after him. Of course if he cannot take them the cables will go to you ;)

[phipiper10]

Got it. Thanks.

[phuz]

Got them today. They're hooked up and warming up. :)

Question: I've never seen or known about the imedance matching feature in the interconnets. What should this be set to? Or how do I know what to set it to? Any documentation would be helpful.

[Face]

Look in your pre's owners manual under specs, input impedance.

[reeltrouble1]

Phuz,

You need to know the input impedence for the gear the signal is going to, if you cannot find out set the switch in the middle.

RT1

[reeltrouble1]

doubled

[phuz]

Ok folks I'm wrapping up my demo.

Rich, please PM me your address/info and I'll get them on their probably Tuesday.

[Lasareath]

Can I get on the list please?

[heiney9]

I The bass is much more solid and the highs have a crispness and air around them that I like very much. The sound stage has opened up even more especially the depth and separation between instruments and singers.

H9

Check this out someone is using my review in their add on ebay

http://cgi.ebay.com/MIT-Terminator-2-Speaker-Interface-Cables-8-foot-pair_W0QQitemZ180301455294QQcmdZViewItem?hash=item 180301455294&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318


MIT audio cables to me are the best! One reviewer on the Polk Audio Forum explains it this way:

"...the bass is much more solid, highs have a crispness and air around them, the sound stage has opened up - even more the depth and separation between instruments and singers..."

This is taken straight from the body of his ad. Wonder if I get 15% of the sale?

H9

[phuz]

Knock knock, is this thing on? Who's next, and where do they go? Please PM me. I'm just sitting on them right now waiting on info. Thanks. :)

[phipiper10]

I sent my addy back on the 6th but just resent today via PM.


Thanks
Rich

[phuz]

Sorry Rich had forgotten about that PM. They're on their way. Should be there on the 6th.

When I get a minute I'll try to write something up. I will say I really enjoyed the cables and they did make a difference over my Kimber 8tc/Hero combo. Considering overall synergy I'm thinking I'll maybe upgrade my pre and/or amp before I go on a cable binge though.

Thanks for this opportunity guys. When I get a moment I've got some stuff going up for Karma so keep an eye out...

[Ricardo]

Rich confirmed he got the cables; Sal, I need to ask Mark to add you to the list.