Rm-1000w

[megadeth_rocks]

Hi my first post I need help, recently buy a RM-1000W passive subwoofer, my av receiver is a sony 85w p channel subwoofer amplified out and passive out, I connect my polk RM-1000W to the amplified out and nothing happens, the signal is there but is weak not movement in the outside cone but the interior 6.5 barely moves what I can do? a more powerful receiver? a external amplifier for the woofer? I have a sony explode 12" connected to the sony a/v and hit awesome what happened to the polk? any diagrams for the correct wiring? thanks for read this. :confused:

[math wizard]

This sub needs to be connected at speaker level or "passive out" on your receiver. The way you have it connected is for a power sub. Hope this helps.

[megadeth_rocks]

thanks for the response, newbie here :) any diagram could help me, my av receiver have 2 outs for subwoofer:

one amplified out type clip of 85w

one subwoofer out (rca type)

I try the clip type and the 85w dont move the RM-1000W, my av is 6 0hms


I need more power?
suggestions please?

[Motzart]

He is also looking for a users manual for the RM1000.

PM'd me but I looked everywhere NADA.

Maybe 1000+ eyes are better than 2?

Maybe someone can help??

.

[Eric W]

Try hooking the RM1000 in parallel with the main front L and R speakers following this diagram: If you have only one RM1000, ignore the blue binding post.

http://www.polkaudio.com/forums/attachment.php?attachmentid=36557&d=1226683629

[megadeth_rocks]

thanks for your help now this little plays ok!