PDA

View Full Version : rca issue?



cadenceclipse
01-17-2009, 01:41 PM
noticed when fading between front and rear on hu that nothing changes when faded to front and theres no sound when faded to rear. pulled rear rcas hoping to hear no rears but they still played. could any1 tell me if that is a hu issue or rca/amp issue? seems like everything is running off of ch 1 and 2 any1?

only126db
01-17-2009, 06:52 PM
What head unit?

cadenceclipse
01-17-2009, 09:12 PM
cd7200mkll

MacLeod
01-18-2009, 12:17 AM
When you disconnect the rear RCA's from the amp, the rear channels still play??

CarSoundDude
01-18-2009, 11:27 AM
I thought it might help to know that the manual and install guide for the CD7200mkII are located at:

http://www.eclipse-web.com/us/download/manual/index.html

Hope it helps the people other than cadenceclipse (who I'm sure already has it :p ). Since I have this HU as well, I am interested in any issues that come about.

only126db
01-18-2009, 01:03 PM
noticed when fading between front and rear on hu that nothing changes when faded to front and theres no sound when faded to rear. pulled rear rcas hoping to hear no rears but they still played. could any1 tell me if that is a hu issue or rca/amp issue? seems like everything is running off of ch 1 and 2 any1?

Sounds like an install issue, you need to check and see if the rca's are in the correct positions on the back of the deck.

Could be rears are in the sub "non fading" outputs.

cadenceclipse
01-19-2009, 10:33 AM
thank u every1 for help! i had dek professionally installed(3 year warranty!, duh). yeah mac, rears still play! i think amp internals r bad calling cadence 2day. i have 3 pairs so sub must be sub. dude have any problems yet(ie. in cold weather)?

Low_e_Red
01-20-2009, 04:12 AM
Nope. Sounds like your 4ch is in the 2ch mode.

cadenceclipse
01-20-2009, 10:12 AM
Nope. Sounds like your 4ch is in the 2ch mode.

that question was aimed at dude. talked to cadence and the amps crossover was programmed to run on 2 rcas(kinda like 2 ch. mode) i went from p3 to p8. full control. thank u evry1 for input and help