I shall speak of audio here

[lightman1]

Yep! It's true. I've got somewhere in the range of four pre-amps,7000 watts of amplification, God knows how many AVR's, processors and the like.
A sh!tload of speakers(hoarder:o). Some really nice Radio Shack IC's. And some CDP's laying around.
After sitting here this morning on the couch spinnin' some tunes, I opened my eyes and said "Does it take this much to have a nice rig?" NOPE!
Therefore and hitherto, I shall set off on a quest to have a minimalist approach to finding a Nice setup. Nothing fancy, no hand-built pre from a small and unknown village in the Swiss alps or $29,000 silver-soldered amps that can change weather patterns when you hit the power switch. Just simple 2ch goodness that I can maybe one day sit back and say "That's it."
Help and advise is appreciated and will be taken in and considered without bias. Unless you're talkin' tubes. Get it? Tube bias!
I still consider you all a bunch of Hacks, but you are my roving band of Hacks and I thank you.



Let the journey begin.
I am Lightman. Hear my stereo!
AKA Russ

[danger boy]

not to sure what you're asking exactly.. but take the best of the best of the pre's, amps, CDP's. etc.. and put together one sweet sounding system. sell the rest and buy some beer and more tunes. and call it a day.

I'm the type that keeps a minimal amount of unused gear in the house. maybe three or four pieces tops that are unused. everything else gets Ebay'd or Craiglisted. I hate to see good gear go unused and just taking up space.. when someone else could be enjoying it and I could have some extra spending $$ in my pocket. ;)

[Face]

Pass Clone amp, Dodd ELP, DacMagic, cheap transport, some decent cables, and you're on your way for around $1K.

Or pick up a Cambridge 540A/640A, a 540C/640C, and some decent cables. You won't have the magic of tubes or be 2 ohm stable, but you'll save some money and still have a very nice sounding budget rig.

I didn't include speakers since you already have more than what you know what to do with. :D

[zarrdoss]

Just get a bose wave raido, it does the same job as all that fancy audio stuff and takes up less space and sounds way better!

























NOT!;)

[lightman1]

not to sure what you're asking exactly.. but take the best of the best of the pre's, amps, CDP's. etc.. and put together one sweet sounding system. sell the rest and buy some beer and more tunes. and call it a day.

I'm the type that keeps a minimal amount of unused gear in the house. maybe three or four pieces tops that are unused. everything else gets Ebay'd or Craiglisted. I hate to see good gear go unused and just taking up space.. when someone else could be enjoying it and I could have some extra spending $$ in my pocket. ;)

.....Not asking, just stating that this is a new "project". Thing is Al, I have the stuff to put together something here, but it would involve to many links in the chain. I don't want to part with some things because my youngest son has developed an interest in this God forsaken thing we call a HOBBY(moneypit). He, himself has set up decent 2ch in his room. And has asked for advise on how to make it sound better. I'm so tickled I could almost piss myself (picture in your head).
I'm just wanting to try the same thing, but from a different angle.
Love Ya' Al.
Drop a note and say Hi
Russ

[lightman1]

Pass Clone amp, Dodd ELP, DacMagic, cheap transport, some decent cables, and you're on your way for around $1K.

Or pick up a Cambridge 540A/640A, a 540C/640C, and some decent cables. You won't have the magic of tubes or be 2 ohm stable, but you'll save some money and still have a very nice sounding budget rig.

I didn't include speakers since you already have more than what you know what to do with. :D

Added to the list.
Thanks J

[lightman1]

Just get a bose wave raido, it does the same job as all that fancy audio stuff and takes up less space and sounds way better!

























NOT!;)

I shall WALK to Colorado and piss upon your foliage for such a statement!!!!

[zarrdoss]

dont you just love those bose (blows) ads on TV?:D

[lightman1]

WAF approved... But this is not a product bashing thread:cool:
Only positive thoughts....hummina hummina hummina hummina....
anybody?

[george daniel]

For a pre-amp,,I think that you should look at the EE minimax(Tutay modded) and the Wright Sound WLA12A,, and I'll be happy to let you evaluate them the next time you come south. The Wright uses a 6x5 for tube recticification and a pair of 6SN7's,,oh,, a 6EM7 for "regulation" (ps),,mine has got some chinese sn7's,, but by the time you get back here,I'll have some "bad boys" in her.Just my .02 worth,, eh,, no one listens to me anyway:rolleyes:probabally a good thing;)

[danz1906]

I agree, a simple tube set-up with a nice pair of musical bookshelf speakers:D

[zarrdoss]

I agree, a simple tube set-up with a nice pair of musical bookshelf speakers:D

x2 I concur

[MillerLiteScott]

I agree, a simple tube set-up with a nice pair of musical bookshelf speakers:D

I think this is going to be my next audio journey. But on the cheap.

[lightman1]

The journey has started. One step taken.

[lightman1]

Thanks Danny(asslaminated)?






still gotta bust chops around here. buncha fruitcakes.

[seeclear]

I shall WALK to Colorado and piss upon your foliage for such a statement!!!!

HA! It is COLORADO. You'd have to shovel out the foliage (snow) first. It is only April, you know. ;)

[lightman1]

i agree, a simple tube set-up with a nice pair of musical bookshelf speakers:d

aaaannnd?

[lightman1]

For a pre-amp,,I think that you should look at the EE minimax(Tutay modded) and the Wright Sound WLA12A,, and I'll be happy to let you evaluate them the next time you come south. The Wright uses a 6x5 for tube recticification and a pair of 6SN7's,,oh,, a 6EM7 for "regulation" (ps),,mine has got some chinese sn7's,, but by the time you get back here,I'll have some "bad boys" in her.Just my .02 worth,, eh,, no one listens to me anyway:rolleyes:probabally a good thing;)

Let me peek into the closet of nice things

[lightman1]

HA! It is COLORADO. You'd have to shovel out the foliage (snow) first. It is only April, you know. ;)

For that, I will shovel a path to pee!

[lightman1]

For a pre-amp,,I think that you should look at the EE minimax(Tutay modded) and the Wright Sound WLA12A,, and I'll be happy to let you evaluate them the next time you come south. The Wright uses a 6x5 for tube recticification and a pair of 6SN7's,,oh,, a 6EM7 for "regulation" (ps),,mine has got some chinese sn7's,, but by the time you get back here,I'll have some "bad boys" in her.Just my .02 worth,, eh,, no one listens to me anyway:rolleyes:probabally a good thing;)

I'm listening.

[Conradicles]

Get some SDA-2B's locally. I think a guy had some for sale in Newton...







JK





His are not for sale anymore. I just checked with him and he likes his simple little rig too much to part with it.


By the way...I think a spot in my weed infested yard is turning yellow...also noticed some pee on my tires this morning.

[lightman1]

punk

[nooshinjohn]

I would consider one of these...

http://www.audiogon.com/cgi-bin/cls.pl?intatube&1244167076

and a pair of these...

http://www.audiogon.com/cgi-bin/cls.pl?spkrplan&1241403221&/Magnepan-1.6-QR-Black---Update

[lightman1]

Simple AND inexpensive, John!:eek:
Nice looking stuff though.

[187CAM]

I've built 2 sets of these. One in a small footprint floorstander and a bookshelf. Both sounded great. In a blind taste test these won out over others costing 4 times the money. Keep a set of Polks for the sake of keeping a set of Polks. We all need a set of Polks. Choose the upgrades that you think would make you happy when building the speakers. I built my own cabinets, but many are available from Parts Express or Madisound.com.
http://www.gr-research.com/index.asp?PageAction=VIEWPROD&ProdID=148

For a preamp I might look for a used Conrad Johnson PV7 or PV10 with a phono board. For the investment I don't think you can go wrong. I used to think you were buying the name. Today I see where you are buying the quality and the piece will last for years. You'll also have the option of tube rolling to design the sound you're looking for on any given day. I've found the phono stage to be more than acceptable in the CJ and can use a variety of MM & high output MC cartridges.

Amplification is not needed be to serious with a CJ pre in the mix and a pair of the NEO2's. The speakers are forgiving when it comes to power and you'll get that warm feeling from the CJ's tubes. Maybe something of decent quality from a better known builder that has been tried and tested by members of the forum. Something in the 100wpc - 150wpc market?

A good DAC will make-up for the lower cost of a decent CDP as long as it has a digital output. MSB, Monarchy, Benchmark or Theta to name a few. I see where that Ben member is making some cables that many here have raved over from time to time.

Most of all have fun with what you choose and doing the choosing. Sounds like a good excuse to sample a variety of gear from a variety of members of the forum.

[Keiko]

Just get a bose wave raido, it does the same job as all that fancy audio stuff and takes up less space and sounds way better!


I have a Bose Acoustic Wave used in my bedroom system. Not that bad really, but not worth what I paid for it. I also have a vintage pair of 301's that I used for many years. Retired these for my RTi's.

< Getting my flame suit on > :o

[nooshinjohn]

Simple AND inexpensive, John!:eek:
Nice looking stuff though.



sorry bud... thought you meant simple and elegant:o

[lightman1]

I have a Bose Acoustic Wave used in my bedroom system. Not that bad really, but not worth what I paid for it. I also have a vintage pair of 301's that I used for many years. Retired these for my RTi's.

< Getting my flame suit on > :o

I'ts cool. I have set of 901's. shhhhhh..don't tell anybody:cool:

[lightman1]

Takin' notes. Thanks

[george daniel]

I'm listening.

When you come back here,,I'll have a little "mini" rig with tubes,, Monitor 7b's w/peerless,, Wright or EE modded pre's,, 40 watt/upgraded Quicksilver EL-34 tuber,,plus what other gear we can get our hands on,, that should give you start.The VTl's $$ may be out of the shop by then as well.I think I'll have enough to let you get your listen on.

[lightman1]

When you come back here,,I'll have a little "mini" rig with tubes,, Monitor 7b's w/peerless,, Wright or EE modded pre's,, 40 watt/upgraded Quicksilver EL-34 tuber,,plus what other gear we can get our hands on,, that should give you start.The VTl's $$ may be out of the shop by then as well.I think I'll have enough to let you get your listen on.

You're the best, George.;):D. First of next month looks good here.

[CRESCENDOPOWER]

Place a chair in the middle of a pair of Klipschorns and fire those babies in line with your eardrums just like a pair of headphones. I recommend Parasound electronics for this application, and don’t be gentle with the volume knob.:p

[george daniel]

Place a chair in the middle of a pair of Klipschorns and fire those babies in line with your eardrums just like a pair of headphones. I recommend Parasound electronics for this application, and don’t be gentle with the volume knob.:p

Actually, just a few watts of SET power would be fine.

[187CAM]

Actually, just a few watts of SET power would be fine.

3-5 watts of 300b SET would be nice ;)

[lightman1]

3-5 watts of 300b SET would be nice ;)

Feelin' that....

[lightman1]

Actually, just a few watts of SET power would be fine.

I like your style, George.:D

[engtaz]

For a pre-amp,,I think that you should look at the EE minimax(Tutay modded) and the Wright Sound WLA12A,, and I'll be happy to let you evaluate them the next time you come south. The Wright uses a 6x5 for tube recticification and a pair of 6SN7's,,oh,, a 6EM7 for "regulation" (ps),,mine has got some chinese sn7's,, but by the time you get back here,I'll have some "bad boys" in her.Just my .02 worth,, eh,, no one listens to me anyway:rolleyes:probabally a good thing;)

Sweeeeet setup.

[engtaz]

For a pre-amp,,I think that you should look at the EE minimax(Tutay modded) and the Wright Sound WLA12A,, and I'll be happy to let you evaluate them the next time you come south. The Wright uses a 6x5 for tube recticification and a pair of 6SN7's,,oh,, a 6EM7 for "regulation" (ps),,mine has got some chinese sn7's,, but by the time you get back here,I'll have some "bad boys" in her.Just my .02 worth,, eh,, no one listens to me anyway:rolleyes:probabally a good thing;)

George you are a tube enabler. You are killing me and my want want want list.

[george daniel]

tube enabler,,,I like that,, thanks Roy,, maybe time for a sig change.:)

[CRESCENDOPOWER]

Actually, just a few watts of SET power would be fine.

The Klipschorns are 104db at one watt. You will need at least 400 continuous Parasound watts to even hear them.:p

[lightman1]

Update! Santa came early this year! A little package was at my doorstep when I got home. A sexy tube amp was inside. JOOOOYYYYY!
It has begun. Thanks Danny. You have a PM.
Lightman

[lightman1]

Now seeking a nice DAC........

[lightman1]

Update...CDP..Small amp and a pair of bookies...sounding o so nice.....

[rubin]

Pass Clone amp, Dodd ELP, DacMagic, cheap transport, some decent cables, and you're on your way for around $1K.

Or pick up a Cambridge 540A/640A, a 540C/640C, and some decent cables. You won't have the magic of tubes or be 2 ohm stable, but you'll save some money and still have a very nice sounding budget rig.

I didn't include speakers since you already have more than what you know what to do with. :D

hear ye hear ye

[reeltrouble1]

Update! A little package was at my doorstep when I got home. A sexy tube amp was inside. JOOOOYYYYY!
It has begun. Lightman

Lest we ever forget:

TUBES RULE.

They say the world will end in either ice or fire, I choose fire.

RT1

[reeltrouble1]

well I could let the Shed Rig go complete for about 38K.

if you are going to use paypal add 3%

RT1

[treitz3]

Did you ever get your DAC?

[george daniel]

The Klipschorns are 104db at one watt. You will need at least 400 continuous Parasound watts to even hear them.:p

Huh :confused:

[treitz3]

Drugs man, drugs.