Enclosure Dimentions

[Matt]

Hi, I have 2 polk/MOMO 12s and I was wondering if anyone has dimentions for a Sealed .88 Cubic Foot Box. Any help would be appreciated. Thank you.

[AcuraLegend]

The dimensions for a basic sealed box for your momo's is simply lengh x width x height then divide that number you get by 1728 to convert your volume to cubic feet. Just remember that that you need a total of about 1.76 ft if you decide to share the same airspace between the subs. You also have to add 1.5 inches to each final dimension to compensate for the wood (3/4 MDF board recommended). Check out the manual that come with your polks. It walks you through the process of building your box. And if you don't have on, you can down load them in pdf form from polks website. Hope that I could be a help.

Allerick B.

[bm8998]

HEY MATT WASS-UP!! SOME PEOPLE ARE NOT VERY SWIFT WITH CUTTING WOOD AND CALCULATING VOLUME ! I KNOW , IT TOOK SOME EFFORT ON MY PART TO FIGURE OUT MY BOX. FOR YOUR 12"S IF YOU MAKE THE OUTSIDE DIMENSIONS (OUTSIDE OF BOX) 30in.long by 14in. wide by10in. tall, THIS WILL GIVE YOU AN INTERNAL VOLUME OF 1.752, IF MY CALCULATIONS ARE CORRECT. ANOTHER TIP HOME DEPOT CAN CUT ALL THE WOOD FOR YOU AND THEN YOU CAN PUT IT TOGETHER YOURSELF AT HOME. BY THE WAY , INCASE YOU DON"T KNOW 3/4 MDF , YOU CAN USE PARTICLE BOARD. I BOUGHT THE WOOD, CUT IT, GLUED ITAND ASSEMBLED IT FOR LESS THAN $20. P.S. MY CALCULATIONS ARE FOR A SHARED BOX, THIS MEANS NO DIVIDER INSIDE.

[djsSHO]

For Everyone's sake STOP WRITING IN CAPS!!!!!!!:mad: