Bobsama
08-31-2009, 12:23 PM
I have a pair of SDA-1's and I was hoping to do the upgrade. Now, of course, 25 years after the fact, I am probably correct in saying that the upgrade kits are no longer sold. Even so, I was hoping to do the conversion. I have tweeters and I can still find the original MW6501 woofers on eBay, but I was wondering if anyone happened to have an actual parts list? I'm most interested in what particular dacron stuffing to use (particular thickness) and what the dowels (to plug the ports) should be--material-wise. Is wood good enough? Plastic? Rubber?
From what I gather...
1) Eight MW6501 midwoofers
2) Four SL2000 tweeters
3) Four? 18"x14" sheets of Dacron stuffing
4) Two 1"Dx0.75"L dowels
5) Carpenter's Glue
6) Two 2.5Ω 25W resistors
7) Normal tools; power drill, screwdriver, saw (would it be possible to use a jig saw and then sand/cut the remnant off?), soldering iron, 60/40 solder
From what I gather...
1) Eight MW6501 midwoofers
2) Four SL2000 tweeters
3) Four? 18"x14" sheets of Dacron stuffing
4) Two 1"Dx0.75"L dowels
5) Carpenter's Glue
6) Two 2.5Ω 25W resistors
7) Normal tools; power drill, screwdriver, saw (would it be possible to use a jig saw and then sand/cut the remnant off?), soldering iron, 60/40 solder