Hardware Rings for your Passives and MW6XXX

I need to find out how many people want these so I can figure out cost, The more I run the cheaper it is for me to run through the shop, and cheaper for you as well.

Please don't muck up the thread with a bunch of crap outside of what I need from you guys. It will make it easier for me to keep track.

All I need is the speakers you are wanting to do and how many speakers you want to do as I know some of you have 2 or more sets of certain models. I would like to keep this for the vintage Polk Monitors (5jr 7B's, 10's 12's ECT, and SDA's for now.

Also to be fair I will PM the cost to everyone as the cost for someone ordering them for the SDA SRS/1.2/1.2tl will be different then say someone that orders a set say for the 7B's.

Everything will be prepaid before I run just as the Crossover plates I did like a year ago.

I will include shipping with your cost of your order + 3% paypal if that is how you choose to pay..

When this takes place I will need the help of some of you for measurements for the passives for some models as I don't have them.

This will take some time so please be patient..I will leave this up for a few days to see what kind of response we get.

You can veiw Pics HERE!!!!

http://www.polkaudio.com/forums/showthread.php?t=102023

Thanks Guys!!!!!


Larry.

I am interested. Working on a pair of SDA-CRS+ can they be made for them?

Definately in for a set...

SDA-SRS 2.3TL.

Will there be a backing plate for the tweets as well?

I'll take one pair of 6.5" rings.

I am interested in a set for 2Bs.

I have 1.2TL's and 1C's, it will depend on the price as to what I get, but I really want them for the 1.2's.

Thanks

I'd be interested in a full set for the original SDA2's. These have the (3) 6.5" drivers in each speaker, and the PR's. Also, if you ever come up with anything for the tweeters, I'd be interested in those as well. My speakers are old enough that they do not have the t-nuts on any drivers. It's all just coarse-thread screws right into the MDF.

Put my request in for;
SDA 1A
SDA 1C studio
SRS 3.1

Tweeter mounts would be Great!!!!!!!

Thanks!!!!!!!!

The problem with doing tweeter rings that I can tell is the cross braces get in the way so maybe I look at doing a button with the hardware and you guys can hot glue them in place..

Quote:

---

Originally Posted by TOOLFORLIFEFAN

The problem with doing tweeter rings that I can tell is the cross braces get in the way so maybe I look at doing a button with the hardware and you guys can hot glue them in place..

---

For me, gluing in soft wood thread inserts in the only option that "I" would do. T-nuts do not like MDF. Your method is far superior to inserts!

Would you be interested in making these for some Seas drivers?

I will definitely do my SDA 1C's

If it's not cost prohibitive I'd like to do my 5B's as well.

Let me know what other information you will need Larry in order to get me a price.

Thanks

H9

I'm in Larry per our conversation. I need them for SRS 1.2TLs.

Thanks Brother.

I could sign up for as many as 44 midwoofer rings: CRS+ (4 drivers total), 1C (8 total), SRS (16 total), 2.3TL (12 total), and 2A (4 total).

Thanks Larry.

Quote:

---

Originally Posted by Emlyn

I could sign up for as many as 44 midwoofer rings: CRS+ (4 drivers total), 1C (8 total), SRS (16 total), 2.3TL (12 total), and 2A (4 total).

Thanks Larry.

---

:eek::eek::eek::eek::eek::eek::eek: Do you have them all hooked up to separate rigs?

I'm in I'd like some for my SDA1 signature's and my SDA2a's
thanks Larry:D

I would take (if the price is right) 8 - 6.5 in, 2 - 12 in (For 1C's)

Quote:

---

Originally Posted by TOOLFORLIFEFAN

The problem with doing tweeter rings that I can tell is the cross braces get in the way so maybe I look at doing a button with the hardware and you guys can hot glue them in place..

---

What about something like this. If this is something you would do i'd take 8 of them (2 per tweeter)

http://home.comcast.net/~gimpod/images/tweeter.jpg

I would definately like some for my 3.1TL's, and depending on the cost I will probably do my 2B's and one or both sets of my Monitor 10's. Of course this depends on the cost of the rings. But, without a doubt I would like to do the 3.1TL's. This is very very generous of you to offer to do this Larry. We all appreciate it very much.

Greg

Quote:

---

Originally Posted by gim54pod

I would take (if the price is right) 8 - 6.5 in, 2 - 12 in (For 1C's)



What about something like this. If this is something you would do i'd take 8 of them (2 per tweeter)

http://home.comcast.net/~gimpod/images/tweeter.jpg

---

That's what I was thinking, as well. I was going to go home and double-check how my bracing looks before I said anything, tho.

I would be interested in some for my 2B's.

Scott

Quote:

---

Originally Posted by gim54pod

I would take (if the price is right) 8 - 6.5 in, 2 - 12 in (For 1C's)



What about something like this. If this is something you would do i'd take 8 of them (2 per tweeter)

http://home.comcast.net/~gimpod/images/tweeter.jpg

---

Why not just drill the hole out and use bolt/screw, lock washer, washer and nut. Unlike the metal housing on the MW65xx woofer the tweeters housing is plastic and shouldn't be over tightened.

Id like a set for my 2Bs

Don't have a clue how much these are and therefore affordability, but in my order of preference until money runs out:

2.3tl (I think I'm going to keep these after all)
2 pairs of SRS (one with the replacement plates on them - need another pair)
2 sets of SDA2 (original)
1 set SDA2a

Have 2 pair of monitor 5jr - is it an option on those? (1 pair passive radiator, 1 pair ported) - Craigslist finds

Movtarget in NC
SDA, and now monitor, hoarder

I'm in for a set--SDA 1C's--thank you kindly.

I could potentially be interested in these for my:

SRS2
Monitor 10
Monitor 7
Monitor 5
Monitor 5Jr+

Of course, depends on cost. I'll definitely want them for SRS2s, though.

SRT Mains but that will be another die.

SDA SRS

SDA SRS 1.2TL

Three Sets of SDA CRS+


Thanks for the offer!

I have 1.2tls and 1Cs. A set for each pair, please.

Thanks,

John

1 set SDA SRS 1.2TL for me please! If possible with dark screws. Not sure if I can find inch threads in Shanghai.

Will you include the drill rings?

Nice offer.

2.3TL

SRS 2