RTA 11t crossover "upgrade" to tl wiring schematics are here!
OK, Jesse and har I got the wiring diagrams yesterday in the mail. I pulled a crossover and took some pictures of them as well. I'm by no means an electrical engineer, and I'm having some trouble reading these and IDing the parts on the actual x-over, but there are only 3 differences between the two crossovers that I can see. I'll scan these in and post them as soon as I can.
If you could maybe take a look at them and let me know what I'll need for parts I'll get them ordered up!!
They scanned as .pdf files so I'll need to mail them to you.
11t X'over...Upgrade to TL's (SL3000)
I have identified the crossover of the RTA 11T's(Pic. attatched). Also it stated in the X'over Schematic of the "11TL" that these number should be replaced.
Replace these part with the correct Values to TL version.
2a = replace to 5W 1.5 ohms
3 = replace to 16uF
4 = replace to 0.3mH
and the number 5 should be remove. The number 1 is the
safeguard (This will stay if you want) doesn't make any
I tried my best to identify it, please correct me if something
is not right.
1.2TL's mods and 2.3TL's...
We have to upgrade our SRS1.2TL's and 2.3TL's too. I should
do these mods sooner the better...
I have all the info but, I have to make my Center channel
RTA 15TL first... too many projects:confused:
Mods as well... this will be excellent results...
If you replacing the remaining parts as well, this will sure and absolutely sounding sweeter than the original "TL", because the parts are "new and updated ". This is more than Upgading...
Modifiying as well.
Percy audio have a good and excellent parts exceeded to the
manufacturer specs. Good Quality as well.:)
Let me know how much you will spend on it.
I love these "TL" upgrades...
Originally posted by Tour2ma
I've been following this with great interest. I'd support the new threads, but please don't leave us SRS owners out. After all, don't we have the most gain?
Are you also interested to upgrade your SRS to "TL" version? If so
then I am more than willing to help...;) Lets roll...