Printable View
I recently noticed that my speakers were sounding off. A little trial and error and I realized that the stereo tweeter in my right channel speaker was not working. It is not blown as I switched it out with the dimesional speaker that is working and it worked in it's place. It seems to me that there must be some sort of crossover problem. Any suggestions of other things to check?
First, I would check all the connections between the tweeter and the crossover. Then all the connections on the crossover. Just see if anything is loose or came off.
Im having the same problem the tweets will stop working and if you tap the cabnit they will start working again.I have checked all the connections and everything ok. could it be a cold solder joint on the crosover?
The SDA I use fuses for tweeter protection. Check the fuses and clean the fuse holders.
If its the 1C, it uses Polyswitches. You need to replace them. Message Ken Swauger and he can set you up with replacements. You will need to be handy with soldering to perform the job.
jump it ;)