Search:

Congratulations! Buckle up for the parenthood ride...it's a great one! Beautiful name BTW.

Busy weekend, didn't have much time to play in the theater. Added a second row of seating for the riser and did some quick adjustments per everyone's suggestions. Got the center off of the floor...

Contrary to the comment that you won't damage your speakers because they can handle more power than you're feeding them.....BS! The most common cause of speaker damage is from trying to drive them to...

Well, I made the changes suggested and changed L,C,R, and surrounds to 80Hz but left the rear surrounds at 100Hz. LFE was set at 120Hz so I left that as is and......still underwhelmed. I'm now...

[I]Are the jumpers on the back of the speakers there and tight?

Yes to both questions.

Thanks to everyone for the input. I will make changes late tonight and let everyone know how it goes. One quick question...should I set all of the speakers to 80Hz and leave the rear surrounds at...

-9db on the left and right.. that seems a bit much.. I also have A7's being pushed with 200w/ch and I only see about -4/-5db.[/QUOTE]

I think that was for the surrounds if I remember correctly. ...

I notice that many have recommended setting the speakers to small but I see no such option in the menus for the 709. Can anyone tell me where that setting might be? Thanks!

I just finished the room and it is just drywall for now with carpeting and one sofa in the room. Adding another sofa for the riser this weekend. As I said, it is a small theater with a 106 inch...

Used 12 gauge speaker wire for all speakers. I just did all the connections and I think they are good as well. Thanks!

Thanks again to everyone for their help. I re-ran Audyssey tonight and here are the results of my Audyssey setup.

79453794547945579456

Thanks to all for the replies! I will run Audyssey again and then check the settings late tonight. I'll post results with pictures to see if the problem can be pinpointed from that. Thanks again...

[QUOTE=PubFiction;1861889]Dont try to push it, when ever I hear this I think under powered receiver and someone is pushing into clipping territory. You can ruin your speakers if you push them. I...

Small world! I'm on the opposite end of town in Greenwood. I ran Audyssey once but I think I'll run it again to see if anything changes. The room is small, 15x15, with a riser and two rows of...

I just set up my HT with RTi A7s for the mains, Csi A6 for the center, FXiA6 for surrounds, and had some OWM 3s that I had for the back surrounds. I'm using a HSU VTF3 Mk 4 for the sub and an Onkyo...

I'm in the final stages of setting up my HT and need some advice on rear surrounds. The fronts will be RTi A7s and a CSi A6. The sides will be FXi A6s. My dilemma is whether or not to go with a 5.1...

I'm in the final stages of setting up my HT and need some advice on rear surrounds. The fronts will be RTi A7s and a CSi A6. The sides will be FXi A6s. My dilemma is whether or not to go with a...

I'm finally getting my RTi A7s (they've been on backorder from Polk) and had a quick question about the setup. I will have RTi A7s, a CSi A6, and FXi A6s for my home theater and it was suggested...

Going to try to get the FXi A6 or A4 for my side surrounds and use the OMW 3s for the rear effects speakers. If it's not wise to mix the two then I'll probably just go with the OMW 5 for side...

Thanks for all of the feedback! It looks like RTi A speakers are the way to go. I do think that I will have to keep the OMW 3s for the rear surround for a 7.1 setup due to space constraints (and...

I plan to do 7.1 surround but it is a small room as home theaters go. I am converting unused space that is 14'8" x 14'6"...not the ideal situation but I have to work with what I have. Originally I...

I am setting up my HT system and will have RTi A7s for my main speakers and the CSi A6 for my center channel. Would OWM 5s and OWM 3s work as side and rear surrounds? Are they timbre matched to the...