Free Shipping on All Orders 1-866-764-1801

Vist our Online Store

Search:

Type: Posts; User: PhiDeltBeers

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    577

    I've had them biamped for months, just thought...

    I've had them biamped for months, just thought I'd try to change it up and run more power to them to turn the gain down to get rid of the unwanted hiss (I'm using an audio control Lc6i). If I turn...
  2. Replies
    3
    Views
    577

    Bridging PA D5000.1 with MM6501's?

    I decided to send a bit more power to my MM6501's by bridging the PA D5000.1 amp. It now puts the amp at 200w @ 4ohms as opposed to 100w @ 2ohms or 75w @ 4ohms. Are the speakers too much load on...
  3. Been researching the line drivers a bit. Any...

    Been researching the line drivers a bit. Any reason to go for the $200 ones as opposed to say $50 - $80? Only need a 2 channel with my setup. And anyone else agree with Vital, that this could be...
  4. Might look into that as well, but I'm still...

    Might look into that as well, but I'm still tinkering and it's getting better. However, I just noticed something interesting on my lunch break. When connecting my factory sub wires (brown and lime...
  5. I was afraid of that. I was hoping the the Polk...

    I was afraid of that. I was hoping the the Polk Audio PA D5000.5 would have enough power, but it might not. Looks like I might have to just find a "happy medium" and see if I can live with it. Ugh!
  6. The higher I set the gains on the LC6i, the more...

    The higher I set the gains on the LC6i, the more hiss I get. Conversly, if I set the gains lower on the LC6i the hiss goes down, but I have to compensate with the gains on the amp (by turning them...
  7. Ok, so I figured out the gain levels on the LC6i...

    Ok, so I figured out the gain levels on the LC6i had to be "calibrated", then set the amp gains. It sounds good at volume, but I have a "hiss" sound now at no volume or even if I turn the audio off....
  8. Amp came in today and it's been frustrating. I...

    Amp came in today and it's been frustrating. I was running the new speakers off the stock amp and it sounded very good. I'm working on it tonight and have hooked up the amp and the LC6i. There is a...
  9. Thanks guys...hopefully when I recieve all the...

    Thanks guys...hopefully when I recieve all the hardware, I can get it set up as discussed here. Also one more question...:wink:, The Audiocontrol LC6i has 6 input channels. The stock Mark Levinson...
  10. Thanks Arun! This is the exact info I was...

    Thanks Arun! This is the exact info I was looking for! So just sit the passive crossover to the side and this setup should prove to be much better? Also, the EQ on the stock Mark Levinson HU is...
  11. Anyone? SHould I set the midwoofers to 4000Hz...

    Anyone?

    SHould I set the midwoofers to 4000Hz low pass and around 60Hz high pass and let the supplied cross over do its thing with the tweeters? Or just set the midwoofer at 60Hz high pass? At...
  12. Polk Audio MM6501 components with Polk Audio PA D5000.5

    Ok, I just bought a brand new Lexus IS-F (good-bye Nissan GT-R :cry:) with the Mark Levinson stereo. I've already torn the car apart and have purchased the following items:

    Audiocontrol LC6i...
Results 1 to 12 of 12