Search:

Zach,

You will probably get better responses in the "on the move" section on the bottom of the page rather than here in the home audio section.

Labrat

In please

When buying helmets fit is much more important than brand. It seems that each of the manufacturers use a slightly different shaped form so some may find HJC more comfortable while others will prefer...

Thanks for offering this most excellent karma.

I have owned many Polks and the RT800 would have to be the best pair I have owned. Since you are encouraging other brands I would argue that my KLH...

It seems to me that any voltage strong enough to jump hundreds of feet through the air (lightning) isn't going to be stopped by less than an inch gap in any switch. You are much better off...

While not quite in the same class, I had a S4 laying on it's side and eventually the wires did rub against the woofer. It would be worth removing the woofer and taking a look.


Scott

The biggest problem I can think of is that calibration is going to be a nightmare. Since you aren't going through any form of a preamp, your sub will always play the same level regardless of what...

sucks2beme,

nice find - do you need to change your screen name now? ;) :D ;)

Scott

Moviefan,

I happen to have similar HT setups from both Infinity and Polk. The Infinity is a pair of Entra 3 (dual 6.5" woofers) with the entra center 2 (dual 5?" woofers). The Polk is RT800...

Since I won't have a chance to audition this AVR, does anyone know how the older Denon's sound compares to the newer versions?

Scott

Tour,

Thanks for the pricing info. If it goes cheap I will be all over it but it seems that for close to 200 there are a lot of other good options - or am I missing something special about this...

I too have a pro logic rcvr that will do 3 channel logic - should have thought of that.

I also have a Denon AVR 1403 - rated at 70w x 5. By my way of thinking the 1010 should sound very similar...

I was scanning the auction site last night and ran across this as a local sale. From what I have been able to gather it is a prologic only AVR made in about 1990 that does 35w x 3 OR 100w x 2. (How...

Show a 70's vintage receiver a 3 ohm load. I was dumb but got lucky - the rcvr is still working in the kid's room.

NOT in

Scott

Faster,

It is way cool of you to offer this great Karma.

I am running receivers for my systems as the budget has yet to allow steping up to seperates but would like to try the better sound of a...

You got it, they mentioned that a conventional extingusher gets foam everywhere and recks the equipment. I assume they are looking at sound as it is less destructive.

Anyone have any luck with...

The magazine article we were reading was talking about putting out fires in space. If you use a conventional extinguisher the foam gets everywhere and recks the equipment. To avoid that they were...

Hi all

I was reading the April 06 Boys Life with my Tiger Cub when we ran across an article that described extinguishing a candle with a 120 db 55 hz tone. Since that is not something to pass up...

insies, please

We will miss you while you are out - best of luck and a speedy recovery.

Two things come to mind,

1 Bridging the amp will reduce the damping factor - that is the ability of the amp to accurately control the movement of the driver.

2 Bridging the amp results in it...

I have two children (now 4 and 6), and had only minimal issues with speakers. The biggest deal was when I got my RT800's and my oldest stuck a finger in the tweeter. Bulged in, popped out when the...

I Miss The Old Flea Market!!!!

I am in flyover land and haven't heard many of the offerings but I doubt they would blow away my homebuilt. A closeout Avelanche 18 with a PE 1000 watt plate in a 7.5 ft sealed lightly stuffed...

Glad to hear you stepped up and did it right. I've been thinking about the HK line myself - what do you think of it so far?

Scott