Search:

Nice pickup. I know you will enjoy them. Have fun.

I've completed the crossover rebuild. I managed to fit all components onto the old crossover board. See photo's. Other than relocating one of the 34uF caps lead holes, and enlarging them to fit two...

This is for my rebuild for the goodwill M7c’s I picked up. I already have the replacement midwoofers waiting.

Well, I hope I have not fallen off of the deep end doing this, but after doing some...

Thanks for the input. I have carefully used an exacto knife and tweezers to extract the rubber overhang in the screw holes. The rubber was a little tough to carve out but it is done. It may not be...

Nice, I still have my Marantz Model 5030b cassette deck, purchased used a the Ramstein Base Exchange in 1981 for $150.00, my junior year in High School, my dad was stationed there at the time. It is...

Well, I am running my modest system with the Marantz Model 2325, it definitely does not take much juice/position from the volume knob to drive the Polk speakers I am using. I am learning speaker...

Welcome, you will feel the force of the SDA's here from the others. The biggest Polk's I have are some M10B's, waiting to evolve with some new RDO-194's and sometime soon a new crossover. But for now...

Here's another picture of both the new MW6502's.

A new update, I ran across these Polk M7C’s at the same Goodwill I found the M10b’s I have now. These M7C’s look nice but they do have a few cosmetic issues. Seems someone tapped/wrapped a flat head...

Just a few more notes, first run Japanese music/soundtrack CD's/initial pressing (mainly Anime) will come with extra items. Also they are generally package with a Special album covers that normally...

I am into Japanese Anime CD soundtracks, and sometimes the only way to find stuff is through places like CD Japan(online). Also, most of these soundtracks are shorts runs that may be available for...

Well, I also have a copy of "The Mystery Men" on DVD, which is almost on the same level as Howard. But it is from the 90's, so does not qualify as a cheesy movie from the 70's.

Howard the Duck.....

Wait a minute, I still have that on VHS somewhere.......

Okay, I got to say something....

Vincent Price, The Abominable Dr. Phibes, and Dr. Phibes Rises again.....

My All time favorite.

Good question, I probably would have not, the one that was working properly did sound pretty good. I was wondering if the SL2500's were silk domed tweeters, from what I have read in another post,...

The 194's arrived by an Orange Ryder Delivery truck. Apparently FEDEX is having to rent trucks or it was in the shop? Two sets, two boxes. One set with notes on some minor fitting problems if used...

Received notification in my email that Polk has shipped the two sets of 194's on 8/30/10. Let the tweeters sing!!!!!

Hopefully I'll get them by friday or next tuesday (not sure if FEDEX takes...

Welcome to the M10 club. I understand the sentiments of finding Polk's in unusual circumstances. Found my set of M10b's at Goodwill for $32 bills. While not exactly free, or in as nice of shape as...

Replacing the caps is one thing I have been considering in rebuilding the Marantz 2325. This website, has got me thinking about it,

http://www.irebuildmarantz.com/restoration/2325.html
...

Impressive setup! Thanks for the update. I've been running my setup with a Marantz 2325 Receiver, picked up at GoodWill for $15 bills in 2003. I took the chance that it did not work, even with some...

Excellent score on the 5's, enjoy them. The setup sounds impressive, hope you get to try as a HT setup too. It should envelop you. Hope you replace the impromptu speaker wire soon.

Good luck.

Well, having received the RDO-198's for the Monitor 7 Series 2, I went ahead an installed them. First I installed one into the bad tweeter cabinet so I could hear the difference between the new and...

While I am still waiting for the RDO-194-1's I ordered. I received the RDO-198-1's to replace the SL2500's in my Monitor 7 Series 2, this morning. FEDEX left them on my doorstep. I do not remember if...

I may have inserted my foot in my mouth when I started asking about the Polyswitches I was reviewing the schematics tonight I downloaded from the forum. It looks like the Poly's are not in circuit on...