Search:

Yes, welcome!

Just curious, does your dad have just 1 speaker or a pair of speakers? Do you know what model?

My last and BEST speakers will be arriving when Ray puts his fully modded 1.2TL's up for sale next April 1st! And if I remember correctly, he is throwing in the all of AQ interconnects, x'ovr and...

I think the DCR on the HF and LF are all the same as stock, except for the large 16mH inductor. Ray stated that the 14AWG NorthCreek had a lower DCR, and that the larger 10 AWG Solen was even lower...

Is the duct tape on the speaker sourrounds and cones an anti-resonance upgrade? :eek:

Thanks DK for the thread link! I don't know how I overlooked this one. And I appreciate the explanation on the output and limited frequencies of the dimensional drivers. Good to know that in addition...

I have just a few mods left on my SRS, and I've been through dozens of threads looking for some key information. As always, I would be very appreciative of any information to help 'fill in the...

Ray, I would love to hear your system - maybe the best sounding Polks on the planet and maybe one of the best sounding speakers on the planet. I know that sounds preposterous to a lot of audiophiles,...

OK, latest update from DK states that keeping the total DCR is no longer essential. Seems like you can use the logical 'bigger is better'!

"A high DC resistance SDA 16 mH inductor was used to keep...

I found that I used 14 AWG, 16mH, 1.3ohm from Notrh Creek. http://www.northcreekmusic.com/COILS.html

The inductor that DK used was by North Creek which I believe for the SRS is a 16mH inductor. Please check the schematic to make sure that is correct. The guage of wire used to make the inductor will...

Well, I've done the x'overs, rings, gaskets, inductors on the speaker side. I think I have a good pre/power amp, cdp, interconnects, speaker cable and power conditioner. My electronics are not...

If this would go better as a new thread, or in another section of the forum please let me know.
As DK suggested, I contacted Audio Advisor and spoke with Corey. He was very congenial and receptive...

I hope this is the place for this. After reading the improvement Ray got with re-wiring all the internal speaker wire, I absolutely want to do this. He reported on the Cardas Litz wire and the...

Thanks Raife! I get 622"/speaker - I would not have guessed ther was that much wire inside those cabinets. But thinking about all of the stereo drivers/dimensional drivers/ tweeters/etc., I can see...

I know I'm a bit late in this thread. I'm going to re-wire my SRS's and I have looked through many of these threads for the total amount needed. I have seen the total length necessary for several of...

Hi dpowell, I'm trying to get reconnected to audio. Been out due to personal situation for a couple of years. I'm in a new house and this looks like a good place to start. Send me your PayPal and...

To answer your question OldmanSRS, from DK's review (link above in his post #12) the direct current resistance (DCR) of the modified SRS's decreased from 4.7 ohms each to 4.4 ohms each with the new...

Do you have a price range?

Well, first let me sincerely apologize to everyone :smile:. After all of the discussion on my shrunken soundstage after the inductor 'upgrade' I was prepared for a long night. Drill in hand, allen...

Ray, the answer to questions 1, and 2 is 'yes'. But 'no' to question 3 as it is mounted as far away as geometrically possible from other metal and still have something study enough to mount them on....

Ray, the answer to questions 1, and 2 is 'yes'. But 'no' to question 3 as it is mounted as far away as geometrically possible from other metal and still have something study enough to mount them on....

First, I really appreciate the suggestions to help fix my problem. This CP forum is really First Class! When I did my XO'r upgrade I simply attached some 'quick connects' to the original 16mH...

Well, I am about finished with my SRS upgrades. All has gone well and the SQ improvement is truly astounding. I will report in much more detail once the job is complete and I've had an opportunity to...

LOL - That's one reason I like this forum :rolleyes:

How about 17.

Good question and one that I will follow. I also hope someone with "1st hand use" can give some good info.

And not to hijack your thread, but what did you use to rip your CD's? I assume a CD in...