Search:

no i have not. I really don't want to go around dymating my whole room. I didn have some extra subs from my car and three extra channels on my amp so i tried it and it just wasn't my likeing. back to...

i have a sunfie cinema grand sig. arch. choice 2 425*5 in 8 ohms and 850*5 in 4 ohms. i am running a yahama vx2500 as the pre. with the level on the fronts -2.0db's and the eq has the highs -2.0-0.0...

i have already done that and i have also lowered the level on the top mins 2db's and turned the level down on the pre amp.

I own a pair of rti 12's and i have a problem with the bright ness and a little lack of bass, I was just wondering is there any way to up grade the interals like you did to the LSi sereis or am I...

I have a cinema grand arc. choice sereis 2. I am only useing two of the channels for 2ch stereo. I also have a pair of rti 12's. I have had a problem with them beging to bright. I could not get the...

I would have to question how lound you have put the gain up on the pre amp. I can bi-wire the speakers and have. Thats gives them 850, But you can't turn the speaker up past half way. Regaurdless. I...

No Im not even toching the potental of the amp I have reached the limit of the speakers, i was thinking of some 800d's but can't afford that.

The amp is a sunfire cinama grand sig. 2 putting out 425*5. I have the speakers in a equearlity triangale. I am useing all ditigal inter connects. The speakers are distorting just at the limits. They...

In the owners manual they state that the rti's take up two 500 watts rms. I have also read numerous posts that state that they are power hungey. I just got my amp with 425 x 5 and expected to be blow...

No, I have not run YAPO. I like to mess around with the sound myself, for better or worse of course. I have all the higher feq's turned down so I can get rid of the brightness. I also am running at...

I have now reciviced my new sunfire amp and have the full setup running. I have noticed that the Rti's are a very bright speaker and can't even take the full 425 watts a channel. I have the highs and...

That is a solid line of reasoning but, the sound waves proagate throught the air. When a seven hits it starts out smaller and will always be smaller than a 12 or 15 fireing at the same time in the...

what type of wire would you suggest, becuase i don't belive in 900 dollar wire. Also when i get my amp i will be selling a m 1.5t if anyone is looking, it has a hum but works great, I would recommoed...

i have a m1.5t and that is no slouch in the power deparment. That beging said a 7 can't make bass like a 15 or 12 for that matter. I don't really understand why polk dosn't make a large bass woofer...

The amp is 425x5, and I got a really good deal on it. I waited for months befor I bought it. I custom made the wire with monster bannas, they are quick and easy to plug and unplug. Thought i was...

its the pdx. I have the exect same amp and it just won't run right. I bouth the pdx and to alpine type x ran off a alpine 9887. It just doesn't like to work. THe amp was shipped with the wrong fuse's...

i am runnign 8 gauge power wire for the speaker wire, should i upgrade and what should i do for my preamp. I am useing a yammie vx-2700 not cheap but not the best. I also use a optical out from my...

i just bought a SUNFIRE CINEMA GRAND SIGNATURE ARCHITECT'S CHOICE II to run my polk audio RTi 12's does this have enuff power to run then and will the voltage outputs sound good.

you have to much power going to the tweeters and mids, also I like to keep the x-over around 12db so you can get a good mix with the next driver, when you swith to the alpine face you will only get...

also I don't see the great bass i just can't seem to get the deep notes that i am looking for I just don't know if the 7's can do it or mabey it is the amp, sorry for the spelling for it is late and...

I have the amp's bi-wied with 8 gauge power cable.There is one spade on the amp side with 4 banna's to the post's The amp is beging feed a single through a yahama rx v2700 whit RCA,s it gets all my...

I want to get the most power out of my amp. THe 1.5t in 4 ohms gives 500x2 and that would be what the speakers could take. I personal like the high sound on the carver amp, but the bass is lacking. I...

Sorry it was late last night and I worked late. I have a yahama as my pre, with a caver 1.5t as my 2 channel power. What I was wondering was there a way to wire them to a four ohm load off the amp...

Can you wire the RTI's into 4ohms?

I did some more seaching and found a website that actually has all of the manuals. I hooked the amp up to two rti 12s and the sound great. Does anyone eles have the same setup any ideas.