Here's the pics of it opened up, I went for it and only kept the center channel crossover. but by passed the 300uf cap that limits the low frequency cutoff. it's now Nominal 6 ohms impedance. The...
Buy Direct M-F 9am - 10:30pm EST 1-866-764-1801
Vist our Online StoreType: Posts; User: redbullet
Here's the pics of it opened up, I went for it and only kept the center channel crossover. but by passed the 300uf cap that limits the low frequency cutoff. it's now Nominal 6 ohms impedance. The...
No Warranty, bought it off ebay - mint but used. So I don't have much to lose.
I built quite a few speakers of the years and many used multi drivers. I know I can tie the woofers and tweeters...
It's been a few days so far and still like. I may try to reverse to leads on the rear which would fix the out of phase thing. I also was thinking of removing the crossovers and making it one big two...
I have tried it both ways. Just for the hell of it I tried last night wiring it as :
L front + L Rear in parrell - R front + R Rear in parrell. Then hook negative from lefts to amp then plus from...
For a bedroom setup it's hard to beat. Sound is great and works real good with their 8" sub bends perfectly. If you use it in a larger room I would add back speakers for a better surround image.
I do ! I tie the left and right front speakers in Parallel then tie the center taps in series. Comes back in close to 8 ohm load. Works quite well. I use it with RM6800's front as sides and sides as...
Super Job !
you should grab those baby's up , before someone else does!
I agree. Just look at polk itself most were all crap after the SDA's stopped being made Till..... the LSI's
I'm not knocking the SRS / SDA's at all, for their time the were way ahead. But when you look at steel stamped baskets not very sold boxes (by today standards) they fall short. Also I find the there...
HSU TN1220's passive tuned to 16hz
No really do not ned the subs , they are crossed over at 50hz and gives my a excuse to use my MC2300 :)
Finally got them to post
Moved up the food chain Pair of Hyperion 968 speakers with MC60's driving them :D
2 ea Polk MW6510 Drivers for sale in fine shape. $45 + shipping for the pair
Paypal only.
Priced Dropped to $800 :D
Now on the Gon , Make an offer :-)
http://cls.audiogon.com/cgi-bin/cls.pl?spkrfull&1201490089
80 watts when your run them in mono. Even any of the Hafler transnova amps would be a giant step up, their cheap and bullet proof. Changing the tweeters out (plug and play) will also be like night...
No not the TL's, In really good shape except on ding in top back corner. Can only notice it if you look close and from the back.Grills wood in super condition. All drives perfect. All new (six) RD0...
Thanks, BTW guess the Compendium is no long available?
Can't seem to find that post, I would like to read it.
Get rid of those carver amps and that would be one giant upgrade. They are not in the audiophile list for sure, If you really like that sound upgrade to theSunfire line . If you can find a pair of...
Someone gonna get a good deal ;)
On the Gon. Not mine but look nice
http://cls.audiogon.com/cgi-bin/cls.pl?spkrfull&1201032505
Good reading still just trying to figure out how they do left right information across one wire.