Search:

Ok, I think I have broken the subs in and they sound great, very accurate bass, just as I was hoping.

In order to play with the sound a little, I flipped the sub facing in to increase the box...

It is 1.00 before displacement, putting it at .02 ft3 below the smallest recommended size. Like I said, this is probably the biggest box I could fit in the trunk of this vehicle. I think it sounds...

Well I finally got mine in and installed it in the 1.00 ft3 box. I am still breaking it in, but I think it sounds amazing in that enclosure. Because of my trunk space (RX-8) I can't really get a...

Thanks for the input on that, it's encouraging for my box size. Did you notice increase in output and a higher frequency response with the smaller enclosure? Did the sound quality decrease when you...

Question:
Would reversing the subwoofer in the 1.00 ft3 enclosure be the same as having a bigger enclosure? It is too early in the morning to do the math, but it would put it close to 1.20 ft3.

Actually, I just looked at the specs on the PDX-1.600. It is 600W RMS to either 4 or 2 ohms, so you could either get the DVC or the SVC variety. The DVC is wired 2 ohms from the factory, so that...

That seems like a good match.

You're right, you are clueless about the subs ;) The MOMO series subs are a great sounding sub, they make the DB series sound like dog poo. But, the SR will sound much better, much cleaner, and as it...

That's a great question. In theory it should work. I would try it, I don't think you would hurt anything.

I want to know how it sounds when you get it done. What type of car do you have?

Sonicelectronix has finally got the SR124-DVC in stock, so hopefully I will get it next week. I'm still going with...

The mounting depth is 7-3/5", so I would give it at least 8" to be on the safe side.
As far as the box shape, from what I understand any shape with the same volume will sound the same as long as it...

I am going to get the 1.00 ft3 box, to save on trunk space in my RX-8, I'll let you know how I like it with and without polyfill. I am still waiting on the order to come in. I don't know if anyone...

How much power were you feeding them?

When you say low, what frequency range are you talking about? below 40Hz?

Correct, RX-8 is not a hatchback.

What do you mean you have gone through two subs?

Can I use some polyfill in the 1.00 ft3 box to get more displacement out of it?

Are we looking at the same sub? Where did you get 1.2 cubic feet from? According to the PDF manual it says .88 cubic feet plus .14 cubic feet for the sub displacement which would make it 1.02 cubic...

Hello,

I purchased a single SR124-DVC for my RX-8 and it is still on back order. I'm looking for the most accurate bass reproduction possible and I have an Alpine V12 600W RMS at 2 ohms Mono amp...