Search:

What would you recommend for surrounds with my RTi70's and CSi40?I have R15's right now but want something better.I have a HK 520 but am picking up a Onkyo 705 shortly.System is 5.1 for now,any...

He Is Risen Indeed!:d

What if I went with the 705 and used my HK 520 to power the RTi70's.Would this work?How would I connect this set up or which settings in receiver would apply?Thanks for your help guys!

Hi all,I need to choose between the Onkyo 705 or 805 to fill my room which is 23x14.I don't know if that is considered medium or large room but I do not want to come up short on power.I have RTi...

I have been looking at the Onkyo 705 receiver to upgrade from my HK 520 receiver.What other models are comparable to the Onkyo.Such as Denon,Yamaha or Pioneer?Thanks

What is the best way to hook up two subs,and how to calibrate both subs?

You will have no problem running the 70's with the 225.H/K underates their power spec's,I have the 520 and it is rated for 75x5.Actual output in the lab was around 125(all channels driven),h/k makes...

Does anyone know how a movie in 6.1ES DISCRETE would play on a seven channel rig?Correct me if I'm wrong ,but if I play a movie with 6.1ES MATRIX on a seven channel rig,the SBL/SBR would play the...

Do you think my VEL CHT 12" could hang in there for the "Ring Drop" in LOTR?Have not had a chance to try it yet but wanted an expert's opinion.thanks.

In your opinion,what is THE best superbit title to show off your audio system to your friends?

Thanks for the reply guys,the more I listen to my system now being calibrated the better it sounds.More complete enveloped sound now than before,sound was more singled out before.Home theater ROCKS!

Am I doing this speaker calibration right? All reciever channels set at 0dB,sub at -5dB.Played S&V disc test tones,set all speakers to 75dB,but when I set my sub,I had to turn sub volume at sub down...

Thanks for the help guys,but now it sounds like too much BS,will just stick with the VEL CHT 12".The VEL thumps pretty good but was just curious about dual hook up.

I have a VEL 12" and the D-box 10" that the VEL replaced and was wondering if I can hook up both subs by splitting LFE signal with Y-adapter?How would I calibrate the subs individually if they will...

Thanks for the reply,Does everyone agree with this?

Is it true that a new sub needs to be broken in before workin it hard?

Thanks for the experienced advice guys.

I am hooking up my Velodyne CHT 12" and would like to know what I should set the low and high pass settings on the sub at and what I should set my reciever's crossover at?On the sub I have a choice...

Tour2ma,even if i ran the mains with a two channel amp I would still need another amp to run the SBL/SBR because they have seperate pre outs with no jumper pins for on-board amplification.Ifmovie was...

I currently have a 5.1 system but am wanting to go to 7.1.I have a H/K 520 and would need to buy a seperate amp to drive the SBL/SBR speakers.If I play a movie recorded in 6.1 matrix or discrete will...

Thanks Doc,what is the price of a analog meter at the shack in the U.S?

I found that Radio Shack in Canada does not carry a analog SPL meter anymore,only the digital meter.Is this meter just as good and if anyone has one could you please comment on its operation.

I was wondering how accurate the internal SPL meter in my H/K 520 remote is and how would I set up reference level with it?

My H/K 520 only has sub crossover settings of 40 or 60 hz and my main speakers frequency range are 35-20Hz.Should I set my mains to large or small and what should I set my reciever's sub crossover at?

Forget about this thread,found info from Dr.Spec .