Search:

I recently picked up a pair of Cobalt 806s bookshelf speakers that replaced my Pok Monitor 40s, along with the matching sub (SW800s). These are of a higher quality than anything else in my setup,...

Frequency response (+/- 3dB): 50 Hz - 28kHz
Sensitivity (2,8 V/1 m): 92 dB
Nominal impedance: 8 Ohms
Crossover: 2400 Hz
Power handling: 100 W
Dimensions: 19.3" high, 9.2" wide, 11.8" deep

Budget is 400 or less, which is not all that much. However, used is okay. I also dont think that I need anything too powerful.

I am pretty happy with my pre-amp, and would rather get more amp for...

I just finished wiring the new speakers, and realized that the left channel of the amp is not working. Which is annoying.

So the question is no longer "Should I replace?" but instead "What should...

I just picked up a pair of JM Labs/Focal Chorus 707s bookshelves on clearance. I am using a TEC TC-754 pre-amp and an Audiosource One/A amp. This system is hooked up to my computer/iPod and is in my...

I just came across a great deal on a subwoofer for my home theater (300 for a JM Labs SW800s, with the matching bookshelves for 375) and now have an extra sub, a PSW303. I am thinking about moving...

how far away from a monitor seven can a laptop/hard drive safely be, since the monitor seven is not magnetically shielded?
i have read what it takes to magnetically shield an old speaker, and dont...

go with monitor 30's - i have listened to them in comparison to M10's, and the monitors sound much clearer.

as for the M10 - dont bother. pay a couple more dollars and at least get the monitor 30's. i really dont understand why polk make them, since they are not that much cheaper than the monitor series,...

i have been asked to setup a gentleman's new polk/onkyo system, and he is going to have an electrician run the speaker wire behind the walls of the room he is putting this system into. does this...

what is the word on the LS series? i saw some on ebay, LS 50's, and would like to know more about that series. are the specs anywhere online?

i have seen those speakers up on ebay before, but could never figure out anything about them - i cant find them anywhere on the polk website. when were the S series made? where do they fit in...

on a practical note- i tried one of the entry level velodyne's, the VRP-1000. this 10 inch sub sounded good, but the auto-on function would not work for me, and there was no "on" setting to leave it...

where do i buy a new needle, such as a Shure MX-97xE?
thanks,
andrew

i have been given an old marantz 6025 record player- is this worth using? it needs a new needle, but otherwise appears to be fully functional.
thanks,
andrew

i bought a onkyo sr-701 for 300 since it was a floor model, and then used the warranty to fix the subwoofer pre-out, which cost me 30 to ship and i had to wait for a month to use my receiver. so my...

my pair of speakers appear to be an original matched pair, so i had assumed that the fuse assembly had been broken off of one of them. how do i check if the speaker i have should have the assembly,...

i just picked up a pair of monitor 7's, and one of them is lacking both the fuse and the fuse holder. both are playing, with no apparent problems (all the drivers are firing, and sound great). do i...

i got a pair of monitor 7's today, and in comparison to the newer monitor series, i can hear a difference that is rather amazing. the old monitors sound much lighter than the new monitor series,...

yes, i did use a cd player connected to the phono input, which explains the narsty sounds. i did not know the inputs for record players were set up differently- is this true of modern phonographs or...

on the CD "ones" the intro is chopped off of thriller, and it starts with horn fanfare without the footsteps leading up to it.... i was really disappointed.

i checked the fuses as soon as i saw them, and they still are both good. if i switch them, the problem is the same, the right channel works and the left doesnt.
only the "phono" input has both left...

unfortunately, when i wired up the technics receiver, the left channel doesnt play. and since i am guessing the cost to repair would be more than the cost of replacing, does anyone have any thoughts...

hey-
i just found my dads old technics receiver, model sa-300. after doing some searching, i have found that it is a 35 watt/channel stero rig, and i am wondering if it is worth keeping and using...

i use my laptop to play music, and use an external soundcard, a soundblaster mp3+ (or something like that, picked it up for 40 bucks) which connects to laptop via USB and has an optical output. i...