Search:

So the value of 0.27 mh is the same can be used even the ohm do not tally as required.
The RD0-198 or SL3000 the schematic shows as 0.5 ohm whereas the jantzen is having 0.23ohm can it be replace...

I would like to go on the RD0-198 route but I cannot find the inductor value at 0.27mh 0.5ohm unless someone here can advise me where to purchase this inductor

Thank you
Wilson

thanks for the schematic info.Have any one upgrade their M10 using RDO-198 and what is the improvement like.Would like some feedback on this before I place orders with Polk CS

Thank you for all...

Since I am going to upgrade my crossover on my Monitor 10B I am also going to change the tweeters.I am seeking the experts here for their advise to change to which tweeters that is suitable to the...

Guys thank you for all the feedback and instruction

Once again thank you

Wilson

NJ thank you for your advice will definitely be more cautious when handling the Xover
So where is the polyswitch can confirm is it the very small brown cap is the poly swtich??

When I am going to...

Ricardo you mean the very small cap on top of the 12uf cap is the other new 12uf cap to place.Kindly confirm as I am an idiot when come to electronics

Thank you

[/ATTACH]NJ Thanks for your welcome note
My Xover is the same in the picture attach and this picture also show only 1x12uf cap same as mine. Need expert advise as in this forum is to use 2 x12uf cap...

I am new to the polk forum and this is my first posting but have been reading with interest on this forum as I have a M10B own since 1987 with SL 2000 Tweeter and the 5jr+ for 2 years with SL 2500...