Search:

If they were local to me I would have then all ready. Grab them wile you can.

Get a good mic and download a copy of REW and see what issues you have and where. Then you can move speakers and subs around and find the best location for them.

The leads of your DMM may add some resistance to what you measure good leads cost a lot and so does a a accurate DMM what are you using and when is the last time you sent it out to be calibrated?

^^^ +1

What do you mean by a DC problem? More info would be helpful.

What amp are you driving them with? Could one channel be clipping and causing this?

Open the TV up and clean the inside of the plastic shell and apply some damping material to it. No more rattle.

No matter where I place the subs I have a -17 dip at 70hz and a 18+ db peak at 51hz.

This room has no drywall you do understand that that will do to the frequency response. I have a room mode at...

The fake wood paneling you see on the walls is loosely nailed to the walls with no drywall under it that is going to come down soon and up will go drywall which will help the bass a lot sense it acts...

They are not yet covered with cloth but the room is a lot better as far as bass goes. Less boom more punch.

The room will never sound correct it just can't be done. But this really helped a lot...

Just thought I would share a pic of what I am working on. 48" tall 20" thick and soon to be wrapped in plastic. I will post rew measuments when I am all done this should help a lot.

Would be fairly easy to replace the caps and the resistors could be swapped out for mills resistors fairly easy as well. The rest I would leave as is.

The owners manual for the M-504 lists it as being fine to use with 4ohm loads. My friend has one that is picked up new new in the box and it drives his sda-1b just fine.

Well if you run into issues there is plenty of people here that can help. As for a amp I was really happy with the Luxman M-117 it sounded great and has a lot of balls and should be able to drive...

Start to mod them and you will be at 100 posts in no time. What kind of amp are you looking for? There are a lot of nice amps out there are you looking for tubes or what?

Yea I was trying to find out why a post this old was dragged up and now I know why. Sad so sad.

F1 the prints I looked up for his showed a poly which is why I said to look for it. From what I have read and seen some did and some did not.

Check for a open poly switch my money is there. If it is open you can jump it and the tweeted will work once again.

My guess would be that what ever opened the tweeter up took out other crossover parts and that you will need to replace them to make it work again.

Pm sent on Fxi500

Not sure lube is needed unless he is going to backdoor his outlet. OUCH

The tweeters look black not silver but it may just be me. And if you look it does not have donut drivers it is a TL.

Here is a set of 2.3's. They maybe TL's I have a hard time telling from my phone.

http://toledo.craigslist.org/ele/3649091804.html

I have duel subs and love them. If you co-locate them you will gain 6db and sense mine are currently corner loaded too they make a huge impact.

I would first find a good sounding location in your...

Reported.