Search:

I found out this amp likes a lot of deck volume or preamp voltage. I basically had to turn my deck 80% volume right before it seems to distort then I adjusted the the sub gain with the door speakers...

Here is a picture of the enclosure, it replaces a storage compartment....

Yeah no room behind the rear seat (would have to be on the floor). I have heard someone talk about spacing a couple 8" sundowns in my box but it didn't seem like a great idea to me (nothing can fit...

It's a 06 tundra access cab, not a lot room. Right now the 2 8's are in a qlogic box it replaces a storage compartment under the rear passenger seat. Without running them in boxes between the front...

Thanks guys,
Today I listened to co-workers cheap twelves, the output would be great once he wires it right. The difference was how dull they sounded, he listened to the 8's and liked how he could...

I've been working out the bugs out of my current setup, which I like. I'm running 2 mm840's off the pa 5000.5. Now the reason I'm not running larger, is the subs hide under my rear seat. I have the...

I'm running 16 gauge, I bought some thicker gauge since i pulling the subs anyhow (removing that many screws is a chore). I wanted to pull the wiring that was in the box it looked like it had gotten...

Well I never had a issue with protection when I was running the pair at 4 ohm, though they were kinda lethargic . I guess before I call it the amp I should pull the subs and double check that I don't...

Well protection hit a couple times on my drive last night. I go for a drive it starts acting up, it wont go near the same volumes without protection tripping. Maybe I'm asking to much from the amp or...

Yep that fixed it, seemed like the subs were pretty mellow with it that high. After backing the door speakers off more to match the subs sound alot better and have alot more volume.
Thanks for your...

I set the gain on the subs by turning up the gain until I heard distortion and then backed off a 1/4 turn, the gain is probably around 3/4 or less. That was with the deck turned up to around 3/4...

Hi,
I have mm6501's in front and mm651's in the rear, running 2 mm840 subs. I initially had the subs wired for 4ohm and then decided to rewire to 1ohm. The issue I've been having is the amp seems to...