Search:

In December, I got some spikes from Adona Corporation with 1/4 20 threads. Looks like a lot of their spikes come in 6m and 1/4 20. I got their name from a previous post from F1. I believe they...

I did some looking up and I used a rope caulk from Ace Hardware. I read about this in post 106-108 of the Mortite Speaker Seals for SDA's thread. Larry, I also saw that you posted later about using...

The stuff I used was a rope caulk and not the Mortite brand. I don't remember what brand but I seen a post(s) where someone asked about a different brand than Mortite and was told it would be OK. ...

Update. I tried to push the PR harder from the rear and from the drivers without success. Even tried to use the needlnose plier suggestion. Over dinner I thought of using a couple of pieces of...

I know the coupling is pretty good, but I want to put some dynamat on and also some JB weld on the driver magnets. I purchased these back in the fall of 88 (in Mesa, AZ) and they have been moved...

With the space between the drivers, I was able to get them out with the paint can opening tool. I will try pushing harder on the PR. Now I can come in from the back or above from the drivers. Just...

A little over 2.5 years ago, I replaced the gaskets with mortite on my SDA 2B Studio's. I just purchased a set of Larry's rings and want to install them with Armacell for the gaskets. I am having a...

From the picture, they look just like my SDA-2B Studios. Mine have the blade/blade connection above the speaker wire terminals. The back of mine do not say 2B anywhere. Also, my serial number for...

Got my rings today also.

Thanks again!

Larry,

PP sent for set for 2B's.

Thanks again,
Jim

When I bought my SDA 2B Studios back in 1988, the salesman gave me a pamphlet that detailed how the salespeople were supposed to demonstrate the SDA's. A lot of it was positioning of the speakers...

I would like a set for my SDA 2B's.

Thanks, Jim