Search:

It was happening before I calibrate with Avia.

Spoke with Velodyne today and they suggested to connect using a splitter to make the signal stronger. If that doesn't fix it they suggest to send...

I'm using LFE for input to the sub. I'll try bumping the sub volume setting. What I don't understand is why the sub turns on (as it shows in the LCD screen) but no sound from it.

I have a Velodyne DEQ-12R Sub set to turn on automatically when a low freq signal is present. However it is not working this way. When a low freq signal is present the Sub turns on (The digital...

Problem fixed.

I turn off the master Power on/off switch at the back of the subwoofer and used its microphone to recalibrate and things are back to normal. I did this after trying some of the...

Murray1,

I tried multiples positioning of the LSiC. So I don't that not being pointed properly was the reason.

McLoki,

No sound means nothing at all. A good example is the beginning of Toy Story II. You can feel the windows rattling. Now you don;t feel anything.

I'll try what you suggest. I imagine...

Hi,

After calibrating my HT set up using Avia II and using my system for a while now there is nothing coming out of the Sub.

Light in the Sub in on. Cables are fine. Set up in the A/V is fine,...

Murray1

I did have several issues with voice clarity using the LSiC. At the beginning it was hard to admit it as i like very much the LSi9s. But my wife really helped in highlighting the LSiC's...

Thanks you Whadyasay.

Wire-speaker-receiver connections are correct.

I agree with you that it is not a issue to worry about but definitely curious about it.

Lumpy- They just a bit higher than the mains. However, despite of this, I was able to balance the volume from each channel and a similar reading on the SPL when doing a test tone per channel. So I...

This weekend I used the Avia II DVD and SPL meter to calibrate my system (Configuration below). Using Avia's advanced test tones section I was able to calibrate the volume in all channels, including...

I had the same problem and decided to put one on my LSi9 I have as surrounds as center speaker. Since I had a single LSi7 as used to replace the surround. The quality of my center sound has...

By the way I have a spare LSi7 that I bought in a Tweeter liquidation.

I have read in this forum about using the LSi9 as a center. I might try this as I don't mind using the LSi7 as a surround. ...

My set up is 4 x LSi9 (fronts and surrounds) and a LSiC.

In my NAD receiver I ahve set up al speakers to SMALL.

The receiver does not allow me to change just the center to LARGE.

???

Monster Jam,

Sounds like a good idea. I'll try it. It's set up "Small"

There is no sound coming from the left driver of my LSiC.

There is sound coming from the right driver and from the tweeter.

I also checked for vibrations and it's hard to say. For sure if...

BE83663,

Yesterday I ended up buying a DEQ-15R ($950), which is essentially the newer version of the DLS5000R you are suggesting. I guess the main new addition is the feature to self adjust...

Kex:

I appreciate your input/suggestions. Maybe on Friday I'll have time to check the LSIC as you suggest. I will also put one of the lsi9 as a center and, with no surrounds, check if the...

I have 4 x lsi9 and a lsi C connected with blue jean cables to a NAD T-753. I used a SPL meter and the Avia II to calibrate. My room is about 3500 Ft3.

However, after all of this, the audio...