Search:

I would like to buy this please and will pay shipping.

What can I use on or as replacement for the leveling feet, on a hard floor? I am replacing the carpet with flooring.

Thanks

It is something that I will consider, but I'm about to remodel, and spent the last of my "I really shouldn't be spending any money right now" money on these speakers because there are probably not...

The AVR has preamp outs, and also a dedicated preamp mode where the amplifier operation is disabled for cleaner output. Potentially, I could add three amplifiers for the surround speakers and use...

Does a Carver PM-350 qualify as a pro amp?

Thanks

Probably what I need to do is move over to the studio and record some test tones at various panning positions and frequencies, then use them with the SPL meter to see if I can get any information and...

All processing is off, and full signal is going to the speakers as I have removed the bi-amp configuration and placed the amp in "Pure Direct" mode. Placement is as described in the manual. ...

I can run the speakers in 2-channel mode without bi-amplifiction on the current receiver, which should be supplying about 200watts at 6ohms according to Denon. I could someday in the future try to...

It is my understanding that these are current hungry speakers, which is why I thought that bi-amping would help. I listen to these at low volume, I just want to be sure there is enough current to...

I have wondered if the SDA technology was responsible for the reduced center image and tried removing the cable just as a test, and maybe noticed a tiny difference. I will need to get someone to...

In the bi-amplification section, the SDA-SRS 2.3 manual states: "The design of the SDA-SRS is such that no electronic crossover is required... The design of the SDA-SRS makes the use of an electronic...

I misunderstood the reason for bi-amplification with this receiver, as I thought that each circuit was strictly limited to 140w, which is less than the power output capability of this unit in stereo....

I'm not an electrical engineer, so I can't really argue these points. This is the information upon which I'm basing the decision to bi-amplify is essentially that I called Denon and asked if there...

He had the left and right speakers swapped. I didn't notice this until after I got the speakers home and unpacked them. When I heard the speakers at the owner's place, I was not impressed, but...

No, I'm from the midwest in actuality. Cheers though!

The wide sound stage did take me by surprise. My listening room has terrible acoustics due to concrete walls and floors, so I have a ton of acoustic foam up. This can mute high frequencies a...

I picked up a pair of SDA-SRS 2.3 speakers yesterday for a good price. Having never heard these before (as the owner had them set up backwards which I didn't discover until I got them home), I am...

What exactly happens? Is it the geometry of the speaker basket/spider that gets altered, or something to do with the magnetic field shifting? Sigh... these speakers were pristine before shipping,...

Is it possible for a moderator to fix my typos, or delete the thread? Thanks

Oops! Yes, 6502's

I bought a pair of speakers that arrived with both drivers frozen (MW6502). From what I can tell in reading some threads, these cannot be repaired - is that correct?

Thanks

I bought a pair of speakers that have both drivers frozen, so I need replacements

Two MW6052 drivers

Thanks

Hi,

I don't have the speakers - they are for sale on Craigslist. I was just curious as to the models so I could look up reviews or threads. I already have an excessive number of vintage Polk...

69691

I tried looking up "polk monitor series III" which is how they are described, but got no results.

PM sent, I would like them