Search:

Have you tried a ground loop isolator? I was having the same problem when playing music from the comp. I can't remember where I heard about the isolator (probably on this forum), but it worked, and...

By decreasing the resistance (2 ohm load to 1 ohm load), you increase the current flow (amperage). And when you try to increase the current flow through wires, and other parts in the amp that can't...

I've had 3 MM10s since the beginning of the year and haven't had a single problem with any of them. I'm running them off a HiFonics Brutus 1500 sumthin rather (can't remember model #, but it pushes...

That's probably what's going on. When I have my dvd player's audio setting set to surround, that's when I get the dull voices. But when I turn the surround off, I get voices out of the usual...

Here's the insides...

Sorry it took so long, but here's a pic of the receiver. I pulled it out of its box, and it turns out it's not so dirty after all. It was quite dusty, so I used some compressed air and cleaned it...

I'll try to get a pic or two on its current condition tomorrow, if not, definitely before I take it in. There's a few nicks and scratches on the box, a missing button, and a small scratch on the...

Okay, I've switched them back. Everything sounds the same, and the volume is still touchy, but no more worries of overloading...right? I don't know anybody in the electronics repair business, but...

Well...what a difference that makes. I did what you said, with the jumpers, I think. At first, I went Pre-out to main in, then I switched to Preout to Aux in. Now I have volume control, although...

Well, looks like I'll be taking it in for more than just a cleaning. I hooked up some old 6x9s I used to have in my truck, and it sounded like I was only getting the mid range. There were no lows...

Thanks for the info, guys. Unfortunately, we don't have a Circuit City up here so I would have to order them on-line. On the store finder for Polk dealers, there were only two in Alaska. One of...

Okay, so the other day I was down in the basement and noticed an old Marantz receiver sitting in the corner. Turns out, my brother got it from our old hockey coach a few years back. Anyways, I...

Belgian waffles with hot chocolate are the best...not the ones you find in the U.S. (well not in Alaska, anyways. I don't know if you can find em in the lower 48), but the ones actually from...

Doh! That's gonna leave a mark.

I wonder how many of those they sold...:)

Doug

I didn't notice if the saw had an adjustable deck or not, but I'll have to check that out cuz that would make things a bit easier. I wanted to try some fiberglass, because it looks like fun. I like...

mmm, pizza.....wha??? it's not even lunch time yet?

I think I get it now. So, I gotta make sure the inside shape of the box is as far from a sphere as possible? If I actually get the idea here,...

I just figured it'd be easier to add the fiberglass rather than cutting the angles on the wood. I don't really have the proper tools either. It'd be a pain tryin to cut the angles w/a circular or...

They're the mm104's, and they're gonna be in separate chambers. I'm going to use some fiberglass to mold it to the shape of the space (the back seat angles up towards the back, and I want the box to...

Right now I've got each of my 3 momos in separate boxes, and they take up most of the space in the back of my s-10 blazer. So, I decided to make a box to put all three in so that they would give me...

You'll probably want a better amp for that sub. The mm10 asks for 500w rms, while that amp only puts out 200w @4ohms. It's also a 4 ohm, single voice coil sub, so it's gonna be 4ohms unless you get...

bigb,

Post some more specs, or at least make and model of the sub and amp. Links to specs help out a bunch, too. Somebody else on the forum may know a way to wire your setup so that you don't...

Yeah, it'd be a close one running one momo off that amp. You'd be better off with a HiFonics Brutus BX1500D , or another amp of similar specs (1500w rms @1ohm, and make sure it's 1ohm stable). I've...

Is this your amp? If not, try to find the specs and post a link to it.

Doug

lol :) I'll get right on that...well, not really cause I'm broke, so...

Doug

You talkin ta me??? My drawing was done in word and paint. The original actually looks better than the one here. The file was too big, so I had to change some things around, and I changed the...