Search:

Sounds like the drivers are very elastic. Glad it popped out :)

Ok I will do that thanks

Thats what I want to check will this void the warranty?

Now isn't a good time to spend bucks especially since I would get both towers and the center done at once. Still hunting for rtia9s to demo they look soo much more attractive than the rti12s

Umm any tips on how to remove the drivers without damaging the baffle? Should I use a screw driver to pop the drivers out? They seemed glued to the speakers almost. Tried pulling it my fingers and...

Soda blue the tower works fine and plays all notes it just doesn't have that same loudness level the other tower has with certain passages adj this is evident when I swapped speakers and listened for...

Are you serious? That sucks. How the heck do I find that out I live in Canada and I don't know how I can carry this huge heavy tower anywhere

+1 klipsch is a very good manufacturer of horn loaded speakers. Really well built

Svs or hsu budget subs

I think they should be....best to ask Polk cs for the right answer

Another thing to look for is if the speakers cones and woofers are cut from the same speaker fabric

Isn't that something someone can do on their own? I guess the problem is finding out what type of parts are in the stock crossover. Is it difficult to open the speaker and find out what parts you...

They all work. I can touch them and feel them all vibrating. I can even see the woofers move on some passages! But the problem seems to be the mismatched levels in between the tweeter/midrange zone....

No I did not swap th Cables at the same time. I will try that. Cables are monster cable 12 gauge with banana plug interconnects from the wall to the speaker

Just came from the vr3 website some links didn't work. Is there a mod for Polk rti 12s? I have a csia6 so I can get that mod. What models does the modded do? I couldn't locate them on the website?...

Vr3 modding is interesting but I read somewhere here on the forums that it would not be a good idea to change the crossover bc of the research and analysis that Polk did to choose those specific...

Would it be a good idea to experiment with my rti6s and use one as a center and compare that sound to the csia6. I know it would help out with the horizontal sound dispersion according to an article...

I looked for the csi5. Very hard to come by. The csia6 is widely available and according to two Polk reps they should match the rti12s. It just sounds a tad different than the 12s. Almost slightly...

Tony's, I understand what you are saying. My receiver channel levels are all set at 0 right now. I tried raising and lower the levels to balance out the problem with the rti12s as you know from my...

I looked into this. Very interesting. I'm glad it worked out for you!

Also I tried removing the woofers and tweeters to see if everything was okay inside but the seemed almost glued to the baffle. I couldn't remove anything without using a screwdriver to pop it out...

I can explain the sound like this. Both speakers work and sound great. The sound isn't less exciting or duller both are identical except on some passages one speaker will stick out more and you can...

Tony's, you could be right. It could be the receiver. I won't know for sure as I only own one receiver and cannot compare with something else. In time I hope to buy a newer powerful receiver or...

Has anyone modded the crossovers in the rti series to help the speaker sound better or match better?

I listens to them over the weekend with the speakers swapped to the other sides and now I'm even unsure than before. Now it sounds like the weaker speaker is the louder.