Search:

so how many sets should i get if i have two amps that i'll be installing, one for dual subs and another for front component speakers? i believe the front speaker wires will be running to a passive...

they have this 4awg 4 channel amp install kit with what looks like an extra set of RCA's (and actually, that is the kit i'm going to get, my bad), but obviously this doesn't include extra stuff for...

I see these in amp install kits. What are they used for?

I'm looking to order the knukonceptz 4 AWG complete amp and speaker install kit in order to install two 2x180W rms amps, that draw about 30-33 Amps rms. In addition to this kit, it looks like I may...

yeah i know, i've been there in other areas of my life...just remember it's happened to all of us at one point...and thanks to all who have helped so far...

is there some way of measuring/calculating the Watts RMS being sent out if we have 4 V RCA inputs and a 6 V rms gain?

so then you're saying that the same REM input on the amp (it's called a turn-on "trigger" line input on the PA2150) will have one wire going into it from the dash unit, and another coming out of that...

so then if the amps say 180 Watts RMS, it's feeding that much power to the speakers regardless of the gains settings?

If I set the gains to 6 Vrms with 4V RCA inputs, doesn't that lower the RMS...

about $100 bucks each - I had read about this so-called "T" class amp and was impressed by the technology...they were on clearance on some website (techronics.com)... although as i search on froogle...

the amps I have have a gain control range of 0.3-6.0Vrms, and I read in the manual that as an example "if the setting is a 0.3V, it only takes 0.3 Volts to the drive the amp to full output". So by...

Hi all,
Bear with me as I learn to install my first system. I've got some pretty basic questions, that hopefully someone can take the time to at least point me in the right direction or even answer....