Search:

I was thinking about that, I'm going to try a couple things.

I bought the first ones as well, I don't know if they are going to work, they are almost flat, it's rediculious.
A waist of money, atleast they were cheap.

Can anyone direct me to a straight forward guide to setting gains, phase, TA, and identifying dips, humps and harmonic abnormalities?
I do t have any anylizing equipment. :)

Edit: I have some...

Yes and Thanks. :)

The arc amps really seem to do the sr components and mm subs justice, system is sounding really nice. I was using a JL amp for the tweeters before, arc sparkles MUCH more, sound is more delicate and...

Ordered a couple off eBay. I mounted the subs with a gasket made of sillicone so I can use the gasket the subs came with as a spacer for the grills. I applied the silicone to the box, let is dry for...

Thanks!

I don't have enough room to reverse them. Good to hear they've lasted well for you. Crutchfield has them for $10 each, I might give them a try. What size are yours? I was trying to find the inside...

Just to be clear, I'm referring to the strength of the grill itself. Would putting pressure on the center of the grill collapse it at all?

Thanks, I'll check them out. Do you know if they are strong/stiff or will they indent/bend in when pushed on?

I bought them used. I got 3 amps for less than $450. :)

Bump, no one?

I got a little crazy and bought all new amps, got some smokin' deals though. To keep it consistent I got all Arc Audio FD amps.
I'm wonder though if I should give the mids (sr5250 woofers) or the...

Bump, bump.

Anyone know of any mesh grills for the mm1240's? I'm not a big fan of the Polk grills, want something simple that will protect the speakers.

Just pulled the trigger on a arc audio fd1200.1, 1010 rms @ 2 ohms, should be adequate. Im a little bummed I'm not getting a matching Poll PA amp but they will be under my seat so it really doesn't...

X over point of 4khz on the mids and tweeters seems to have brought up the sound stage a little, I'm going to try both a little but I think I like it. I added 1db to the mids and .5 more to the...

I'll check the bottom and try 4khz up top :)
Again, much thanks!! :)

Mid/tweet 5khz x over is better. I left everything else the same for now.

I'll try some of your suggestions, see how it changes the sound. I just recently changed the mid/tweeter x over point so I will definitely try changing it back to 5khz now that the other adjustments...

Looks like I might have found a arc audio fd1200.1
510x1 @ 4 ohms
1010x1 @ 2 ohms
1100x1 @ 1 ohm
Im thinking it would be a good fit.

Well it's definayely a nice starting point!! First off much better midbass reproduction, fuller sound through out. I might adjust the gains on the tweeters a little, I had them turned town 6 db. I...

Sub 63hz
Lows 50-250hz
Mids 200hz-6.3khz
Tweeters 6.3khz
All 18 db slopes
Phase what ever sounds best.
Peq 50hz -1.5 everything else flat.

Full active. My hu is a drz 9255 and it only has 18db x overs. I know many achieve fantastic sound with it though.

Pentoncm,
I've been experimenting with the PEQ on my deck for some time now trying to get that sound that's so purely enjoyable, my vehicle is a single cab truck and it's proving harder to achieve...