Search:

Hi Gene,

Return the I-Sonic to our service center for evaluation.
The address is: Polk Audio 1 Viper Way Vista CA. 92081.
Include a short note with your name, address, daytime telephone...

Hi Benslack,
The amplifier has a 3 year warranty, and the woofer has a 5 year waranty so you are covered.
Remove the amplifier from the back of the cabinet and return it to our service department...

Hi,
It's a pretty straight forward connection. Just wire the amplifier normally for the power supply connections.
Then connect the PA 600.1 RCA audio inputs directly to the PA100.5 RCA line audio...

It can take up to 20 to 30 seconds for it to time out of this mode.
You can also order the replacement remote from our parts department.
The part # is RE1305-1 and has a cost of $10.00 each plus...

While the bar is on and playing, tap "learn" on the bar one time. This will put the bar in the subwoofer level adjustment mode. Then use the volume "up" or "down" arrows to obtain the desired level....

Hey Guys,
Just a heads up... We have not offered free second day air shipping in a couple of years now.
All Club Polk members get a 20 % discount on the part along with free ground shipping.
Fed...

We can help.
Remove the amplifier from the back of the cabinet and return it to our service center for evaluation.
The address is Polk Audio 1 Viper Way Vista CA. 92081.
Include a short note with...

I would recommend looking at the PA D1000.1

http://www.polkaudio.com/caraudio/pa/index.php#pad1000_1

Also try changing the digital audio output format within the DVD player's menu to Dolby Digital.

Another option would be to connect the bar directly to the optical output on the cable box to see if this problem persists.

Hi Jobbs,
Remove the amplifier from the back of the cabinet and return it to our service center for evaluation.
The address is Polk Audio 1 Viper Way Vista CA. 92081.
Include a short note with...

The "p" and "i" version use the same crossover which is part # RE2020-1.
I am attaching a link below for the schematic.
...

I would recommed downloading the schematic and then contact the folks at Madisound.
They will be able to custom fabricate new cossover assemblies.
You can have some fun upgradinging the caps and...

Hi,
Please contact Eric Yee at:
Unicorn Sound & Vision Pte., Ltd.
39, Jalan Pemimpin
#07-00 Tailee Industrial Building
577182, Singapore.

Telephone number +65 63520352

Hey Guys,
Unfortunately the MW7009 drivers are discontinued and are no longer available.
We do not have a replacement available
Sorry.

Don't forget two large with any topping for 10 bucks....

You can restore the factory settings by getting into the main menu.

Remove the amplifier from the back of the cabinet and return it to our service center for evaluation. The address is Polk Audio 1 Viper Way Vista CA. 92081.
Include a short note with your name,...

When I did mine I only replaced the caps and resistors for the upper driver and tweeter. Due to size constraints, I wound up just bypassing the 260 microfarad electrolytic cap with a .1...

Sounds like a good time to go external.

Unfortunately you can't do this with a single transmitter. I was using two of these subs and you have to maintain a minimal distance of 8 to 10 feet apart from the two transmitters.

The earlier production amplifiers did turn off the LED indicator when the amp shuts down. Later production amplifiers did not turn off the LED after the amp goes into the sleep mode. Hope this helps.

Send it to our service center in Vista and we will get it fixed. The firmware version 1.35 will not fix this problem.

Keep us posted and let us know if this solves the problem.

Does the subwoofer still emit the popping sound if the speaker bar is turned off?
You can also call us direct at 800-377-7655 between the hours of 9 am to 5:30 pm Eastern Time Monday through Friday...