Search:

The headunit by the way is an AVIC D3 which has its own EQ settings. What I can do is set the HPF to 80hz and adjust the EQ. If I do this, will it still be possible to get a frequency less than 80 Hz...

If it is really 60Hz, that would make sense. My headunit HPF allows 50Hs, 80Hz, and 100Hz. Both 80 and 100 cut off too much of the mid frequencies so I keep it on 50.

By rollover point, I meant...

Can anyone verify the low end rollover point on the SR6500? Is it set to 40Hz? The problem I am having is possibly sending too much bass to the woofer. It sometimes bottoms out on low notes. I have...

Is there anyone on here that can build one for me? Possibly local to Vegas? If not I can shipping costs. I want this sub!! I'm thinking a custom fiberglass corner box with the right depth may do the...

Thanks greg. The fiberglass box is nice but too flashy. I want more of a stealth look. The understrut would work but I dont think it would look right with the 1" ring around it. My options are...

My dilemma is that I can't find a pre-fab box that will it will fit in. All of the ones made for my car - 350z - don't have the required 7" depth. I am going to be stuck getting a JL3W3 which I don't...

So you would recommend running them bi-amped at 100W to each driver? I also have the option of running them with 200W bridged.

I am planning an SQ system and just placed an order for a pair of SR6500's matched up with an Alpine 4.100 AMP.

I was just wondering if running the Alpine PDX 4.100 bi-amped to the SR6500's would...

I was just wondering if running the Alpine PDX 4.100 bi-amped to the SR6500's would be sufficient or if I should go with the 4.150 instead.

The 4.100 sends 100W RMS while the 4.150 send 150W RMS....