Sherardp
New Polk HT now done
With the help of forum member Grimster (my pal) I was able to design a dedicated theater room that allows one to enjoy the best audio/visual experience in a Home Theater. Talking via IM really gave us a chance to talk "shop", exchange ideas and input on the build. Months later construction began, and now completed.
The room itself is 14x22 and is fully sealed. In order to do this I had all 4 walls poured with solid concrete during the building stage of the home. From there I had each wall insolated, etc. Even under the carpet I had sound padding installed to prevent echos, etc. The room itself is on 6 dedicated 20amp breakers. Power to the PJ is on its own dedicated 20 amp breaker as well. I also installed 2 outlets in the floor behind the second row of seating and also in the riser behind the 1st row. All CAN and rope lighting are controlled by IR using the Lutron Spacer System.
For networking there is a dedicated 100meg fiber line running to the house, from there each room has outlets for LAN. I run a D-link switch in the H/T room so the gear can access the internet for downloads, upgrades, gaming, etc.
I chose Polk Speakers based on reputation and value. The end result is simply amazing SQ/PQ in the room.
New System consists of
JVC DLA-RS10 PJ
Carada 126" Criterion Screen
RTi12s front
CSi5 Center
FXi3 side surround
RTi4 rear surround
SVS PB12 Plus 2 x 2 (subs)
Pioneer Elite SC-07 (pre/pro)
D-Sonic Magnum 1000S (poweramp)
Sunfire TGA-5200 (poweramp)
Velodyne SMS-1
Toshiba HD XA2 HD DVDp
Oppo BDP-83 Blu-Rayp
Xbox 360
Monster 7000/3500 MKII Power Conditioners
Marantz CC4001 CDp
Signal Cable Interconnects
BJC 10/12 awg Speaker Cable
Harmony One Remote
SpeakerCraft IR kit
Display |
|
Equipment |
|
Speakers |
|


