Face

My rig.

New write up and pictures soon.

10/22/09, HT rig edited.

Last updated:10/23/2009

Current HT rig.		A pair of hot rodded LSi15's being tested.

The HT/2 channel room before cabinet veneer.	Living room rig from late 08' with a friend's SRS 2's	SDA Rig from early 08' with a friend's modded SRS-2's.

With the lights out.	My Tannoy cabs before being veneered with my Welborne ST-70.	My HT rig from early 08'.

Monitor 7C's, 10's, and Peerless 7's.	My old setup with separate racks for amps, 2CH., and HT.	The king is dead, long live the king.

Tannoy S8C crossover, bye bye phantom center.	Almost there, a little tweaking left. Note: Dip at 200hz is floor bounce.

Manley Stingray
Marantz SA-15S2
MIT AVt MA I/C's and Speaker Cables, SignalCable Power Cords
Custom Speakers consisting of ScanSpeak Air Circ Tweeters, Seas 4.5" Magnesium Mid/Woofers, Seas 10" Magnesium Woofers, Duelund VSF, CAST, and Claritycap MR Capacitors, Goertz Inductors, and Duelund Resistors. New cabinets made of Baltic Birch underway!
Rega P1 with Glass Platter
Cambridge 640P
Richard Grey 400 Pro
Bright Star Isolation Platforms

Goldpoint SA4-HT
5 channel Gainclone
Cambridge DacMagic
Tannoy HPD-385A, Mains, Custom 200 liter cabs, point to point x-overs with Duelund VSF and Claritycap MR caps, Alpha Core Inductors, Duelund Resistors, Neotech Solid Core Cable for cabinet and crossover rewire
Tannoy S8C Center channel, modded with Claritycap MR and Dayton caps, and Mills resistors
Tannoy S8LR upgraded with Claritycap MR caps for surround rears
MIT Shotgun S2 interconnects
Goertz HT Flat Wire all around
Blue Jean Cables opical for music server
Blue Jeans Cables sub cable
PC Music Server with Blu Ray player
Onkyo TX-SR706 HT receiver
eD A5-300 subwoofer