Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 11 of 11

Thread: Which amp????

  1. #1

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Posts
    10

    Default Which amp????

    Wondering which amp would be better for 2 10" gxr.
    Pa330.2 or the pa880.1. Subs are 165rms each @ 4ohms.
    Anyone know if these subs are dvc or svc?

  2. #2

    Member Sales Rating: (26)

    Join Date
    Jun 2009
    Location
    Salinas, CA
    Posts
    5,018

    Default

    DVC = they'll have 2 sets of terminals per driver. Do you know what drivers you have exactly?

    Btw, welcome to Club Polk!

    -Freddy
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104



    Quote Originally Posted by heiney9 View Post
    Any clue how to use the internet? Found it in about 10 sec.

  3. #3

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Posts
    10

    Default

    Woofer 1 - 10" Diameter (25.40cm)
    Poly/Mica
    Electrical
    Overall Frequency Response 29-400Hz
    Nominal Impedance 4 ohms
    Power Handling (continuous) 165 w
    Power Handling (peak) 365 w
    Efficiency 89 dB
    Voice Coil Diameter: Driver 1-1/2" (3.81cm)
    Install Dimensions
    Full-range Mounting Depth *
    Top Mount 4-1/2" (11.43cm)
    Bottom Mount 5" (12.70cm)
    Cut-out *
    Driver Cut-out Diameter 9-3/16" (23.34cm)
    Thiele/Small Parameters
    Resonant Frequency 34.37 Hz
    Qms 7.0
    Qes 0.53
    Qts 0.49
    Vas 2.31 ft3
    Sd 53.69in2
    Xmax (linear) 0.24
    Le .97 mH
    These are the all the specs. I only see 1 set.

  4. #4

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Posts
    93

    Default

    your sub is dvc, 880 has more power in a 2ohm mode. I would go with 880.1

  5. #5

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Posts
    10

    Default

    Thanks. Change of plans. Had to buy tires yesterday so the amp is on hold yet again. Going to build a proper size box. This should help my current setup.
    Current setup: 1 10" Polk gxr sub
    Sony explode 222w amp (I know you don't have to say anything about the amp)
    bridged@4ohms
    stock hu

  6. #6

    Member Sales Rating: (0)

    Join Date
    Oct 2004
    Location
    North Texas
    Posts
    5,596

    Default

    Quote Originally Posted by chu View Post
    your sub is dvc, 880 has more power in a 2ohm mode. I would go with 880.1
    You mean SVC

  7. #7

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Posts
    93

    Default

    Quote Originally Posted by DSkip View Post
    You mean SVC
    I googled the gxr specs and it camed up dvc, so who knows.

  8. #8

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Posts
    10

    Default

    Hadn't been able to find out either. Guess I'll run it by an audio shop to see

  9. #9

    Member Sales Rating: (0)

    Join Date
    Oct 2004
    Location
    North Texas
    Posts
    5,596

    Default

    Look at the rear of the subwoofer. If it is SVC, then there will be one positive and one negative terminal. If it is DVC, there will be two of each for a total of four terminals.

    You said you only saw one set of terminals, so that would mean SVC. Most of the subs Polk has produced in recent years have been both SVC and DVC.

  10. #10

    Member Sales Rating: (0)

    Join Date
    Aug 2010
    Posts
    10

    Default

    Checked again. Definitly svc. Only one set. Thanks

  11. #11

    Member Sales Rating: (7)

    Join Date
    May 2007
    Location
    Climbing that pole...in your backyard
    Posts
    4,025

    Default

    A big one with lots of graphics on the cover.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts