Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 19 of 19
  1. #1

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default Mono, 2, 4, 5 ch amps, subs, speakers: Polk Audio, Infinity, JVC....

    All these items were used by me at one point or another, some things were in my house for over 2 years just taking up space, some came off the car just 2 days ago.

    All prices except for Polk Audio db1212 include FedEx delivery. If for whatever reason you don't want me to use FedEx let me know.

    Paypal fees are NOT included.

    All items are used (installed and then unintalled lol) so some small imperfections/blemishes could be expected but nothing major. I will mention all "more then small scuffs" on item's description.

    Local pick up is welcomed. I'm often in Brooklyn, NY/Staten Island, NY/Elizabeth and Newark, NJ area.

    Some items come with box/manual, some only with manual, some without anything it originally came with. See this pic for items with boxes.



    1. Polk Audio PA600.1 - $170

    300 watts RMS x 1 at 4 ohms (400 watts RMS x 1 at 2 ohms)
    600 watts RMS x 1 at 1 ohm (one-ohm stable)
    CEA-2006 compliant Class D amp with MOSFET output and power supply
    variable low-pass filter (30-250 Hz, 12 dB/octave)
    selectable bass boost(8 dB) at 40 Hz subsonic filter (30 Hz, 24 dB/octave) preamp outputs output phase switch optional wired remote volume control LED/fan connector powers optional external fan and LEDs
    fuse rating: 30A x 2
    4-gauge power and ground leads recommended
    13-3/4"W x 2-9/16"H x 10-5/16"D





    2. Polk Audio PA200.4 - $80

    45 watts RMS x 4 at 4 ohms (50 watts RMS x 4 at 2 ohms)
    100 watts RMS x 2 at 4 ohms (4-ohm stable in bridged mode)
    2-, 3-, or 4-channel output
    CEA-2006 compliant MOSFET
    output and power supply selectable high- and low-pass filters (100 Hz, 12 dB/octave)
    selectable bass boost (8 dB) at 40 Hz
    preamp outputs LED/fan connector powers optional external fan and LEDs fuse rating: 30A x 1
    12-1/2"W x 2-9/16"H x 10-5/16"D





    3. JVC KS-AX4750 - $65

    Shaun Palmer Signature Series
    Bridgeable 2-Channel Power Amplifier
    Continuous Power (RMS) of 100W per Channel into 4 Ohms
    Frequency Response: 20Hz-20kHz
    Max. Power 560 Watts Mono
    2 Ohm Stable Operation (2-8 Ohm Allowable)
    Bass Boost Control
    Variable Input Level Control
    Crossover Frequency: 80Hz
    HPF/LPF/OFF Swtich
    Gold-Plated Large Input Terminal and RCA Jack
    Over-Temperature Protection
    Overload Protection
    Short Circuit Protection
    DC Offset Protection
    Anti-pop Circuit
    Signal/Noise Ratio: 100dB
    Bass Boost Frequency: 50Hz
    Line Input Level: 0.3-5V






  2. #2

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    4.EXTREME XA-6004 - $50

    Max Power 600W RMS Power Output @ 4 ohms: 60 Watts x 4
    RMS Power Output @ 2 ohms: 75 Watts x 4
    CEA-2006 Compliant
    Signal to Noise Ratio: -75 dBA (reference 1 Watt into 4 ohms)
    Damping Factor: >75
    Input Sensitivity: 200mV - 4V
    Crossover Type: 2-way Variable 12dB Bass EQ Switched, +0/8dB @ 45Hz High-speed MOSFET power supplies Complimentary bipolar transistor outputs Rear bridged and front stereo or variations 2 ohm stereo stable/4 ohm mono stable Built-in 2-way variable crossovers +8 dB switchable bass boost

    GROUND SCREW IS MISSING, 2 out of 4 MOUNTING TABS ARE BENT. Can easily be bent back with a pair of pliers. I can even do it for you if you wish.







    5. Infinity 5350a - $170

    5-channel car amplifier
    50 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
    60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
    120 watts RMS x 2 at 4-ohms + 150 watts RMS x 1 at 4 ohms in 3-channel mode
    CEA-2006 compliant
    variable high- and low-pass filters (32-320 Hz, 12 dB/octave)
    variable bass boost (0-6 dB at 50 Hz)
    Class AB 4-channel amp with Class D mono sub channel MOSFET power supply
    3 sets of preamp-level inputs
    fuse rating: 40A x 2
    4-gauge power and ground leads recommended
    17-1/16"W x 2-11/16"H x 9"D




  3. #3

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    6. Polk db1212 - $120 (LOCAL PICK UP!! shipping cost will kill any desire to buy it lol)

    ported enclosure with one 12" db Series subwoofer
    3/4" MDF construction with front-panel ABS trim
    polypropylene woofer with Santoprene rubber surround 2-ohm impedance
    frequency response: 26-200 Hz
    power handling: 50-360 watts RMS (720 watts peak power)
    sensitivity: 97 dB
    17-1/4"W x 14-3/4"H x 18-11/16"D1 x 15-11/16"D2

    THERE's A CARPET RIP ON ONE OF THE CORNER, see in pics below. Obviously doesn't effect performance.






    7.Infinity 1052w - $40

    10" subwoofer with dual 4-ohm voice coils
    polypropylene cone with large-roll rubber surround
    innovative basket design minimizes depth progressive spider design for excellent cone control
    power range: 60-250 watts RMS (125 watts per voice coil)
    peak power handling: 1,000 watts
    frequency response: 25-400 Hz
    sensitivity: 91 dB
    top-mount depth: 4-9/16"
    sealed box volume: 0.75 cu. ft.
    ported box volume: 1.75 cu. ft.




  4. #4

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    8. Kicker SSMB8 - $60

    spring-loaded nickel-plated terminals accept heavy-gauge speaker wire
    free-air capability
    175 watts RMS
    impendence: 4 ohms
    maximum peak power 350 watts
    frequency response 30-500 Hz
    sensitivity 89 dB
    flush-mount depth 2-5/16

    One of them is still literally brand new. I installed one in my rear door but door panel wasn't fitting back on so second one was never installed. Literally haven't seen any power yet.






    9. Polk Audio MMC690 - $90

    3-way 6"x9" speakers (pair)
    1-1/4" silk/polymer dome tweeter and 3/4" silk supertweeter
    outboard 2-way crossover
    dual nickel-plated terminals for biamping
    recommended power range: 10-100 watts RMS
    peak power handling: 200 watts
    frequency response: 33-25,000 Hz
    sensitivity: 91 dB
    top mount depth: 3-1/4"

    Wires from x-overs to speakers were cut and extended by me with 16g Kicker hyperflex speaker wire so i could have those x-overs where i wanted them, not where length of the wire allowed. Will come with that same Kicker wire connected, you can always cut it to make it shorter if you want to.





  5. #5

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Here's 2 items that are "below normal"

    10. Kenwood KGC-4042A - $25
    The KGC-4042A offers three sets of RCA preamp outputs.
    Two full range sets are controlled by a fader to provide dual-amp balancing, even with a head unit that has only one pair of pre-outs.
    The fader's also ideal for dialing in just the right amount of rear-fill.
    The third set is a low-pass subwoofer output with level control. Whenever this sub output is in use, the EQ engages high-pass crossovers on the front and rear channels. That's like having a free electronic crossover packaged with your equalizer — a pretty sweet deal!
    two sets of full-range outputs with high-pass filter that engages when subwoofer output is in use. subwoofer output has adjustable level control (up to +10 dB).
    adjustable subwoofer crossover range (30-150 Hz)
    dual illumination.
    signal-to-noise ratio 100 dB
    THD 0.01%
    3-1/2"W x 1"H x 5-3/4"D

    It's a fully operational unit, actually one of the best in it's category (look it up) but power wire was accidentally cut when taking it out of my old car. Taking the car apart just to get that wire was an overkill so i never bothered. All you need is another wire harness and u're good to go. I'm sure Kenwood has them, maybe even for free as a curtesy.






    11. Polk Audio db6501 - $40

    power range: 10-100 watts RMS (300 watts peak power)
    frequency response: 35-23,000 Hz
    sensitivity: 92 dB
    impendence: 4 ohms

    1. Will come in a box from coax set
    2. You get exactly what u see in the pics. There's no manual, mounting adapters, mounting tweet cups... Does come with brand new grills thou.
    3. dust cap on one of the woofers flew off. Does NOT effect functionality. Both woofers play the same.
    4. One of the resistors in the crossover broke off from x-over being installed in the door and was re-soldered back. Plays fine since but you might wanna be aware of that.





  6. #6

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Kenwood eq is sold.

  7. #7

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Kicker SSMB8 is sold.

  8. #8

    Member Sales Rating: (26)

    Join Date
    Jun 2009
    Location
    Salinas, CA
    Posts
    5,018

    Default

    Had my eye on the Polk PA600.1 since you've posted this but I don't know if it'll be much of an upgrade over my 360.2 (360w rms@4ohms). I'm powering a 12" SVC Mobile Monitor sub.

    What do you think? Or should I wait and get a 1200.1, be honest :tongue:
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104



    Quote Originally Posted by heiney9 View Post
    Any clue how to use the internet? Found it in about 10 sec.

  9. #9

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Not sure what 360.2 is (Polk??) but if it's pushing 360w @ 4 ohms then getting a sub that does 300 rms @ 4 ohms will actually be a downgrade lol. That's strictly talking numbers,if your 360.2 is Pyle or Boss (again, i don't know which amp u're talking about) then getting Polk 600.1 (that does "less" rms) might actually be an uprgade.
    And even with that, if i were u i'd get 1200.1 and another MM sub lol. :) If memory serves me right MMs are around 400rms while 1200.1 goes down to 1200rms @ 1ohm and 800 @ 2 ohms - just right for 2 MM subs.

  10. #10

    Member Sales Rating: (26)

    Join Date
    Jun 2009
    Location
    Salinas, CA
    Posts
    5,018

    Default

    Quote Originally Posted by Vital View Post
    Not sure what 360.2 is (Polk??) but if it's pushing 360w @ 4 ohms then getting a sub that does 300 rms @ 4 ohms will actually be a downgrade lol. That's strictly talking numbers,if your 360.2 is Pyle or Boss (again, i don't know which amp u're talking about) then getting Polk 600.1 (that does "less" rms) might actually be an uprgade.
    And even with that, if i were u i'd get 1200.1 and another MM sub lol. :) If memory serves me right MMs are around 400rms while 1200.1 goes down to 1200rms @ 1ohm and 800 @ 2 ohms - just right for 2 MM subs.
    LOL

    Sorry, thought you'd see it in my sig. It's a JL Audio amp.

    I only plan on running a single 12" MM due to space (and I don't want the added weight). The sub is rated at 425w rms, and at 4ohms the 1200.1 will be right there with the power I need.

    I've heard great things about Polk's amps and surely understand 'numbers' aren't everything but was wondering if the 600 would be much of an upgrade. I'll just hold out and wait for a 1200.

    Thanks again and goodluck with the sale!
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104



    Quote Originally Posted by heiney9 View Post
    Any clue how to use the internet? Found it in about 10 sec.

  11. #11

    Member Sales Rating: (0)

    Join Date
    Apr 2010
    Location
    Maine
    Posts
    1,393

    Default

    The 1200 will put out as much as the 600 will at 4 ohms.
    The Polk would be a better option due to its versatility.
    Hey, check your post over at diyma, interested in the crossover and tweets.
    Receiver
    Harman Kardon HK 3490
    Speakers
    Polk Audio Monitor 50s
    Subwoofer
    Polk Audio PSW 505
    Cables
    AudioQuest Rocket 33s 10ft
    AudioQuest Optilink1 2m
    AudioQuest Alpha-Snake 25ft
    AudioQuest HDMI-1 2m

    PS3
    Samsung 42" 450 Series.

  12. #12

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Polk MMC690 is sold!

  13. #13

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Polk db6501 is sold!

  14. #14

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    btw i'm looking for Polk MM6501, Tru SSLD6 and can even use another SR124-dvc so if anyone has any of these and wants to trade for anything i have i def can trade.

  15. #15

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Infinity 5 channel is sold!

  16. #16

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Infinity 1052w is sold!

  17. #17

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    EXTREME XA-6004 is sold!!!

  18. #18

    Member Sales Rating: (5)

    Join Date
    Jun 2010
    Posts
    540

    Default

    Spam reported.

  19. #19

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Most of POLK AUDIO is still available!!! (and JVC amp :) )

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. For Sale Polk speakers, Car amps, subs, cables
    By bigaudiofanatic in forum For Sale (FS) Classifieds
    Replies: 13
    Last Post: 05-28-2012, 07:15 PM
  2. WTB: 12" subs, mono & 2ch amps, and componets
    By black magic in forum Wanted (WTB) Classifieds
    Replies: 0
    Last Post: 12-03-2006, 11:21 PM
  3. Infinity car audio subs, amp, and components
    By fireshoes in forum Flea Market
    Replies: 18
    Last Post: 09-30-2005, 11:38 PM
  4. mono amp with polk GNX subs.. please help
    By SndSurge in forum Car Audio & Electronics
    Replies: 1
    Last Post: 05-26-2004, 12:30 AM
  5. mono amp with polk GNX subs.. please help
    By SndSurge in forum Basic Hookup/Wiring Questions
    Replies: 2
    Last Post: 05-25-2004, 11:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts