LSiM707 and LSiM703 Demo Ready

**quadzilla** · 07-31-2011 11:43 PM

Well, when the 707s get close to Texas, let me know. I might be willing to go as far as CO to pick them up, assuming there's no one in NM or the panhandle that wants them first. Then I could ferry them down to Houston or Austin.

**DMara** · 08-01-2011 01:21 AM

Originally Posted by quadzilla

Well, when the 707s get close to Texas, let me know. I might be willing to go as far as CO to pick them up, assuming there's no one in NM or the panhandle that wants them first. Then I could ferry them down to Houston or Austin.

Love your attitude, quadzilla. I'm in Katy, just outside of Houston

**B Run** · 08-01-2011 01:50 AM

Originally Posted by DMara

Love your attitude, quadzilla. I'm in Katy, just outside of Houston

There's a couple of us in Austin that would love to hear them, and i'd be willing to drive to Katy.

**coolsax** · 08-01-2011 08:01 AM

If we can get the 703s here too i'm sure we could ferry them around Austin and SA and Houston.

**dcmartinpc** · 08-01-2011 09:09 AM

I would love to get my ears on a pair of 707's! I am in the midwest like several others who have piped up :) I am in Niles, MI. I think my Parasound HCA-3500 should be able to handle a pair of these bad boys!!! I would be willing to drive to Indy or Chicago to pick them up if needed.

Don

**mrbiron** · 08-01-2011 11:19 AM

Would love to try the 703's only if someone else in the New England area wanted to give them a whirl as well.

**strider** · 08-01-2011 09:19 PM

Originally Posted by schwarcw

I think Strider is up first for the 703's on the East Coast. I could meet him halfway in Breezwood, PA. That would be about 100 miles for each of us. I could also begin the shuttle West or North after my demo.

Otherwise, I wait for them to make it to a location near Pittsburgh.

I do have the gear and can demo them at my place for a number of Polkies in the area.

We could make that work.

**dorokusai** · 08-01-2011 09:26 PM

OK, Strider, I'll make arrangements with you to pick up the LSiM703. They can head north then we'll send them down into the GA area for the next Polkie sweep.

**VR3** · 08-01-2011 09:50 PM

Man I should have just taken the 703 when I was there :) lol

**schwarcw** · 08-01-2011 10:11 PM

Originally Posted by strider

We could make that work.

Originally Posted by dorokusai

OK, Strider, I'll make arrangements with you to pick up the LSiM703. They can head north then we'll send them down into the GA area for the next Polkie sweep.

Excellent!

**dorokusai** · 08-01-2011 10:21 PM

Originally Posted by Vr3MxStyler2k3

Man I should have just taken the 703 when I was there :) lol

I didn't have them at that time Trey, like I said...thought you were coming next weekend so that was the plan.

**VR3** · 08-01-2011 10:31 PM

GOTCHA!

Hmm - I am willing to make a small haul to help move these

Keep me in the loop :)

**TouchOfEvil** · 08-01-2011 10:32 PM

If the 707's got close to louisiana i'd love to give them a listen. Comparing them to the modded LSI15's would be sweet. I'm sure the rotel gear can power em up.

**dorokusai** · 08-01-2011 10:34 PM

They would easily top the modded LSi15.

**TouchOfEvil** · 08-01-2011 10:38 PM

Originally Posted by dorokusai

They would easily top the modded LSi15.

Yeah but a in home demo is what i would to convince the WAF that i need to upgrade.

I've got the TL350's in the bedroom and she likes those.

**leroyjr1** · 08-01-2011 11:04 PM

Mark, when are the new LSI's going to be available for purchase?

**dorokusai** · 08-01-2011 11:21 PM

I keep hearing September.

**edoggrc51** · 08-01-2011 11:27 PM

So doro, whats the plan for us SoCal guys? I know Doug has them first, but what's happening rom there?? Who gets them next?

**Upstatemax** · 08-01-2011 11:29 PM

If the 703's are heading to the NE, I would love to get my ears on them...

**dorokusai** · 08-01-2011 11:32 PM

Originally Posted by edoggrc51

So doro, whats the plan for us SoCal guys? I know Doug has them first, but what's happening rom there?? Who gets them next?

The first idea was to hand them off to a Polkie from the demo he's going to organize but I wanted him to be able to enjoy them for a couple weeks for his efforts.

As far as I'm concerned, you're next in line Edoggrc51. Are you able to pick them up after he's completed his demo? I want to saturate you CA/Westie guys since you usually get left out of all the demos.

**edoggrc51** · 08-02-2011 12:22 AM

Hey Doro, my Saturday's for the month are kind of hectic, which depending on when the GTG is, might or might not let me attend it. But picking them from Doug once he's done with them would not be a problem. We'd just have to chat it up and set a date. I don't think Doug will have a problem hanging on to them a little longer while I get a chance to get them.

**dorokusai** · 08-02-2011 12:23 AM

You guys work that out after the ball is rolling. Whatever you two come up with, is fine by me and we'll move on from there.

**edoggrc51** · 08-02-2011 12:35 AM

Sounds like a plan. I'll be in touch with Doug and work it out. Thanks again for making this possible man.

**megasat16** · 08-02-2011 12:45 AM

Doro,

I presume it'll be my turn after Edo (sounds Japanese?)?

Who will be next after me? I can possibly help arrange for Freight for going to other states as long as the freight bill is not on me!

**dorokusai** · 08-02-2011 12:48 AM

Originally Posted by megasat16

Doro,

I presume it'll be my turn after Edo (sounds Japanese?)?

Who will be next after me? I can possibly help arrange for Freight for going to other states as long as the freight bill is not on me!

Where are the three of you in relation to one another? Yes, Megasat, you're next.

Although I want it to make sense as far as rotation since they're most likely going into AZ after you guys. What do you guys think is the best route? No one in WA has spoken up so were going into the SW, then up into CO.

**megasat16** · 08-02-2011 01:04 AM

Originally Posted by dorokusai

Where are the three of you in relation to one another? Yes, Megasat, you're next.

Although I want it to make sense as far as rotation since they're most likely going into AZ after you guys. What do you guys think is the best route? No one in WA has spoken up so were going into the SW, then up into CO.

We three have no relationship whatsoever. We are all straight and married.

I can palletize them and send off to the freight terminal as far as an hour drive from me.

But please don't ask me to drive to Arizona.

-James

**nooshinjohn** · 08-02-2011 01:53 AM

I think my hat is in the ring for the 707's as well... any chance they will swing my way Doro?

**dorokusai** · 08-02-2011 02:12 AM

Where are you in relation to where these guys are John?

I want this to be a smooth transition so you guys will have to work it out amongst yourselves, as long as it's handled logically with minimal inconvenience to all parties and the last handoff occurs to the out-of-state member....I'm happy.

**nooshinjohn** · 08-02-2011 02:19 AM

cool... I an in the San Fernando Valley... Sherman Oaks to be exact.

**dorokusai** · 08-02-2011 02:37 AM

Start PMs going John and if you guys need a formal decision made, let me know. Just keep me in the loop in regards to where they are and when they start moving.

I need personal information from all of you prior to hand off. I have some already but make sure you email me full name, address, email and contact information.

Cool guys?

Thread: LSiM707 and LSiM703 Demo Ready

Thread Tools

Thread Information

Users Browsing this Thread

Similar Threads

LSiM707 or LSiM705?

Dead Space 2, Crysis 2 demo, and Bulletstorm demo

Need Help Ready to buy

Ready, get SET, go!

I think i'm ready... what do you think?

Posting Permissions