Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 38
  1. #1

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default Polk SR5250, SR104, C300.2, Arc Audio DXE and Tru SSLD6i

    Kinda nice having all that stuff, look at it and think that i will find use for it one day but reality is that i just keep adding stuff to my "closet" lol, time to get rid of some.

    Some items are used, some are brand spanking new, never installed.
    All items are 100% functional and come in original boxes.
    Used items have some blemishes but nothing crazy or out of the ordinary given that they were installed/used.

    Prices are "all in" and include paypal and shipping fees except for SR104 subwoofers. See below.
    I am in Staten Island, NY and local pick up is def welcomed.

    Group shot:



    POLK SR5250 - used - $300

    5-1/4" aerated polypropylene woofer with UV- and temperature-resistant butyl rubber surround
    7/8" ring radiator tweeter with multiple mounting options
    die cast aluminum woofer basket
    2-way external Zobel crossover network (3100 Hz, 18 dB/octave high-pass and 12 dB/octave low-pass) with four tweeter level settings
    power range: 50-100 watts RMS (200 watts peak power)
    frequency response: 60-30,000 Hz
    sensitivity: 90 dB
    top-mount depth: 2-1/4"

















    Last edited by Vital; 08-21-2011 at 01:52 PM.

  2. #2

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,129

    Default

    Jesus those component speakers are friggin tempting.

    Would def be a step up from my db6501's

  3. #3

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    2x POLK SR104 SVC - used - $250 picked up or $250 + shipping

    These subs are 30lbs each so shipping will not be cheap here. At least $50 for a pair i'd assume but i need to check on that. Local pick up is the best deal here as shipping will greatly increase total cost.

    10" subwoofer with single 4-ohm voice coil
    ABS plastic cone
    butyl rubber surround
    cast aluminum frame
    power range: 100-700 watts RMS
    peak power handling: 1,400 watts
    frequency response: 25-200 Hz
    sensitivity: 84 dB
    top-mount depth: 7-1/8"
    sealed box volume: 1.0 cubic feet

    Polk Audio designed their Signature Reference Series subwoofers to deliver superior performance ? you'll hear rich, warm lows, distortion-free clarity, and uncompromising accuracy. Polk packs plenty of advanced engineering into a sturdy, handsome package, so you'll get the impact you want from your system.

    The SR104 10" subwoofer features a cast aluminum basket that offers supreme rigidity while virtually eliminating resonances. A sophisticated venting system keeps the sub's inner workings cool and dissipates heat from the voice coils.

    The ABS plastic cone provides lightweight resilience and responsiveness, and its inverted arch shape minimizes the flexing which impedes clean bass output. A soft butyl rubber surround gives the cone plenty of room for excursion, while maintaining its shape over time.










  4. #4

    Member Sales Rating: (0)

    Join Date
    Oct 2004
    Location
    North Texas
    Posts
    5,571

    Default

    The speakers are outstanding and the DB's compare in no way. If you like your LSi's, you will love the SR's.

  5. #5

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default Polk/momo C300.2

    POLK / MOMO Carbon C300.2 - brand new - $200

    Brand spanking new, only taken out of plastic to be drooled over and then to take these pics. Never seen power, never installed, comes with all paperwork/sticker/manual/wattage caertificate......

    As you can see (and as every polk/momo amp) this amp does more then rated.


    ?150 watts RMS x 2 at 4 ohms
    ?220 watts RMS x 2 at 2 ohms
    ?550 watts RMS x 1 bridged output at 4 ohms
    ?stereo or bridged mono output
    ?4-ohm stable in bridged mode
    ?Tri-way capable (Tri-Way crossover required)
    ?Maximum Dynamic Headroom (MDH) power supply
    ?requires 4-gauge power and ground leads ? wiring and hardware not included with amplifier
    ?variable high- and low-pass crossovers, 50-250 Hz, 18 dB/octave
    ?subsonic filter at 15 Hz, 24 dB/octave (only operates with low-pass filter activated)
    ?6-way Smart System Protection circuitry guards against power and ground reversal, overheating and shorts, current overdraw, and low impedance
    ?Pre-EQ switch optimizes the crossover and bass level especially for use with Polk/MOMO full-range speakers and subwoofers
    ?RCA inputs accept both speaker- and preamp-level input (To use the inputs as speaker-level, you must attach RCA connectors to your speaker wire.)
    ?preamp outputs
    ?optional remote subwoofer level control
    ?dimensions: 13-3/8"W x 2-9/16"H x 9-3/4"D

    If you're building an all-Polk system, check out this exclusive feature; the C300.2 features a Pre-EQ switch, which optimizes the crossover and bass level especially for use with Polk/MOMO full-range speakers and subwoofers!














  6. #6

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,129

    Default

    Quote Originally Posted by DSkip View Post
    The speakers are outstanding and the DB's compare in no way. If you like your LSi's, you will love the SR's.
    Yeah, I keep thinking they are my next step in my car. I just got a 2 channel amp that is 200 wpc @ 2 ohm so I have more than enough power for these guys..... I could even run 2 sets and still be fine.....

    and since its all wired, they would just need to switch the crossovers and reinstall the speakers.....

    I hate seeing these For Sale because it makes me want to buy buy buy...

    Hell makes me wonder how the SR subs compare to my Treo TE.... I could be all Polk + Sundown hmmmmm

  7. #7

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default TRU Technology SSLD6i

    TRU Technology SSLD6i - used - $180

    Below are specs on it which probably will not tell you much but if you search around on diyma you'll find a LOT of reviews on this unit from users. There's not a single "bad" or even "it's ok" review, everyone that have/had this unit speak very highly of it. It's probably the best line driver there is that is also a line conditioner (whatever that means lol). Really thou, just look it up read for yourself.

    MODEL
    SSLD6

    TOPOLOGY
    Class A/B


    CHANNELS
    6 CH

    FREQUENCY RESPONSE
    10Hz ~ 150KHz +/- 0.5dB

    FREQUENCY RESPONSE
    20Hz ~ 20KHz +/- 00.2dB

    THD+NOISE
    < 0.009%

    S/N RATIO
    > 110dB

    INPUT VOLTAGE
    0.001V ~ 9.2V (Unity Gain)

    OUTPUT VOLTAGE
    1V:4.5V Ratio (13V Peak)

    FUSE REQUIREMENT
    1 Amp

    POWER SUPPLY
    9.5VDC ~ 15VDC


    DIMENSION
    3.5" x 4.125" x 1.375"








  8. #8

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default Arc Audio DXE

    ARC Audio DXE - brand new - $850

    Never even taken out of plastic, everything is still sealed.

    In the future all audio products will have the flexibility of a fully Digital Control System with the sweet smooth sound and perfect sound stage of an Analog Device. This was our goal when we set out to build the DXE. We use an advanced digital controller to operate all the features of a sophisticated Analog Crossover. The result is the channel tracking and frequency control of a fully digital crossover without the harsh mechanical sound that can accrue. For years home audiophiles have enjoyed Hi End Analog Systems that produce stunning sound stages and smooth harmonics. Now the DXE brings this level of performance to the car with the control of a fully digital crossover.

    This truly Audiophile Crossover is coupled with a 5 Band Parametric Preamp EQ with fully balanced output and a Digital Control

    Max input level: 8 volts RMS

    Input sensitivity: 8V (0dB), 2V (10 dB), 700m(20 dB)

    Max output level: 10 volts RMS

    Input impedance: 47.5 K ohm

    Minimum output impedance: 600 ohms

    Harmonic distortion + noise: <.005

    Frequency response: +/- 0.2dB

    Separation at 1KHz "A" weighted: >78 dB

    Signal to Noise "A" weighted: >108dB

    Current requirements: 1.2 amps

    5 Filters with +/- 15 dB at
    20Hz-50Hz with Q of 2,
    50HZ-100Hz with Q of 1.4,
    100Hz-1KHz with Q of 1.1,
    1KHz-10KHz with Q of 1.1,
    10KHz with Q of 1.1.

    Manual:
    http://www.arcaudio.com/product-pdf/DXE_manual.pdf










  9. #9

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Quote Originally Posted by EndersShadow View Post
    Jesus those component speakers are friggin tempting.

    Would def be a step up from my db6501's
    Quote Originally Posted by DSkip View Post
    The speakers are outstanding and the DB's compare in no way. If you like your LSi's, you will love the SR's.
    Quote Originally Posted by EndersShadow View Post
    Yeah, I keep thinking they are my next step in my car. I just got a 2 channel amp that is 200 wpc @ 2 ohm so I have more than enough power for these guys..... I could even run 2 sets and still be fine.....

    and since its all wired, they would just need to switch the crossovers and reinstall the speakers.....

    I hate seeing these For Sale because it makes me want to buy buy buy...

    Hell makes me wonder how the SR subs compare to my Treo TE.... I could be all Polk + Sundown hmmmmm
    Damn you guys are quick lol. I quess i need to practice my copy/paste technics lol

    Yes, SR will blow db out of the water. Even the fact that it's 5.25'' vs 6.5''.
    Then again i am the seller so my opinion could sound bias

  10. #10

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,129

    Default

    Quote Originally Posted by Vital View Post
    Damn you guys are quick lol. I quess i need to practice my copy/paste technics lol

    Yes, SR will blow db out of the water. Even the fact that it's 5.25'' vs 6.5''.
    Then again i am the seller so my opinion could sound bias
    Nah, I was aware of that, even as you said despite the size disparity. The problem is always funding.

    Got some stuff that needs to sell to get up the funds.


    Hell I might just sell my rear set of db6501's (or hell both sets) and not replace them until the car is getting ready to sell.....
    Last edited by EndersShadow; 08-21-2011 at 02:33 PM.

  11. #11

    Member Sales Rating: (0)

    Join Date
    Oct 2004
    Location
    North Texas
    Posts
    5,571

    Default

    I've also got an SR104DVC and it is a stellar sub.

    One good set of comps will beat 2 OK sets. You don't need more than one pair of speakers in a car anyways, so why not sell 'em both

  12. #12

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,129

    Default

    Quote Originally Posted by DSkip View Post
    I've also got an SR104DVC and it is a stellar sub.

    One good set of comps will beat 2 OK sets. You don't need more than one pair of speakers in a car anyways, so why not sell 'em both
    Yeah, after doing a quick spec's compare the Treo wins. Mostly thought due to my amp being 1 ohm stable and being able to put out 1400 watts @ 1 ohm, 700 @ 2 ohm (Treo is a 4 ohm DVC wired for 2 ohm load), 360 @ 4 ohm (which is what these particular SR's are).....

    My only though with keeping the other components is that I could wire both sets through my 2 channel amp and get all 4 speakers 100 wpc for each one....

    Will be keeping my eye on this For Sale listing.......

    GLWTS!

  13. #13

    Member Sales Rating: (1)

    Join Date
    Jul 2009
    Location
    Houston, TX
    Posts
    1,278

    Default

    Quote Originally Posted by Vital View Post
    Damn you guys are quick lol. I quess i need to practice my copy/paste technics lol

    Yes, SR will blow db out of the water. Even the fact that it's 5.25'' vs 6.5''.
    Then again i am the seller so my opinion could sound bias
    I will back you up on this. Installing SR5250's in my car were by far the biggest upgrade I've done. As mentioned, they are the LSi's of the car, so if you like LSi's, you will love these!

  14. #14

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    TRU SSLD6i sold!

  15. #15

    Member Sales Rating: (0)

    Join Date
    Dec 2007
    Location
    New Delhi - India
    Posts
    813

    Default

    Wow, that is a nice stash. How long have you been collecting stuff? How come you never installed the arc?

  16. #16

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    How long have you been collecting stuff?
    Right after i sold all of these lol.

    http://www.polkaudio.com/forums/showthread.php?t=110136

    How come you never installed the arc?
    I got it because i was sure to run active 3-way front + sub but it never really happened and i'm very happy with my current 2-way front (SR6500) + sub (SR124). I also got a fair deal on used Arc IDX/XEQ combo which is perfection when it comes to 2-way front + sub so i used that and think i'll stick with it.

    Wow that is a nice stash.
    Thank you :)

  17. #17

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    2x Polk SR104 are sold!

  18. #18

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    Got an offer on SR5250. Unless someone will have a better offer looks like these comps will be gone pretty soon. Just saying.... :)

  19. #19

    Member Sales Rating: (0)

    Join Date
    Jan 2009
    Location
    NW Indianapolis Indiana
    Posts
    9,129

    Default

    Quote Originally Posted by Vital View Post
    Got an offer on SR5250. Unless someone will have a better offer looks like these comps will be gone pretty soon. Just saying.... :)
    Friggin BOB SAGGETT!!!!!

    Well my cash reserve is totally depleted.... But since my wife got a promotion this week I will just have to wait for the next set of em.

    GLWTS.

  20. #20

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    SR5250 are sold!

  21. #21

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default


  22. #22

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    any offers on 2 items that are left at this point - brand new C300.2 and brand new Arc DXE?

  23. #23

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    bump for offers?

  24. #24

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    to the top.

    Still have brand new
    Arc Audio DXE: 4-way active crossover, eq, line driver

    and brand new
    Polk Audio/MOMO C300.2: 2-channel amplifier.

  25. #25

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    ^^^ Still got'em!

  26. #26

    Member Sales Rating: (0)

    Join Date
    Aug 2011
    Posts
    129

    Default

    would 150 rms make the tweeters be really bright? i have a new set of sr 6500 i just recently perchased after monthes of searching and im in the market for a new/used ampfor them and i already have a pa330 for the back, how would 150 rms sound? whats it do does it make the tweeters more harsh and give the drivers more bass?

  27. #27

    Member Sales Rating: (0)

    Join Date
    Feb 2010
    Location
    NY
    Posts
    698

    Default

    If u're talking about having PA330 and C300.2 powering SR6500 - def go with C300.2 to power up woofers.
    It always makes sense to have more wattage for woofers. Low frequencies require more power to achive punch/kick you expect to hear.

    Congrats on getting SR6500, those are close to impossible to get nowadays. Did you get them from ebay last week? There were 2 listings there.

  28. #28

    Member Sales Rating: (0)

    Join Date
    Aug 2011
    Posts
    129

    Default

    Yeah I was the final bid on the bid that ended first got them for 522.85 personally I didn't want to go that far but when I missed the sr5250 for 230sale a while ago I got really upset and decided that. I would get any sr and I looked for months till I found these and decided to not let go

    Im so excited to hear them but I have a big problem......my car front speakers are 5250ok and I bought some adapters for about 16u and turns out there the wrong ones so they don't fit my car and I really want them too:((((((((((( wanted to use the pa330 to power them for a bit till I got a new amp and hu

  29. #29

    Member Sales Rating: (0)

    Join Date
    Aug 2011
    Posts
    129

    Default

    Sorry my DROID sucks at typing and randomly inserts words

  30. #30

    Member Sales Rating: (1)

    Join Date
    Jul 2009
    Location
    Houston, TX
    Posts
    1,278

    Default

    If the 6.5's don't fit your car, you might consider someone offering a trade for the 5.25" 5250's. There are some people here (me included) who run 5250's in a car that supports the 6.5" woofers. Just a thought...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Wanted Wanted: Polk SR5250 Crossover(s)
    By BeefJerky in forum Wanted (WTB) Classifieds
    Replies: 8
    Last Post: 11-29-2011, 03:47 PM
  2. Polk Audio SR5250 + JL 12W6v2...
    By TakeTheTime in forum Car Audio & Electronics
    Replies: 75
    Last Post: 07-22-2010, 09:11 PM
  3. polk SR104 box questions????
    By addikt in forum Car Audio & Electronics
    Replies: 9
    Last Post: 05-04-2008, 10:58 AM
  4. Sealed Box size for polk SR104
    By br85 in forum Car Audio & Electronics
    Replies: 30
    Last Post: 04-01-2008, 09:22 PM
  5. Crossover settings for Polk SR6500 + Polk SR104
    By GelatinousFury in forum Car Audio & Electronics
    Replies: 6
    Last Post: 12-06-2007, 09:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts