Well I was hoping to have some updated pictures for everyone, but I missed the FedEx guy today so I guess I wait. No biggie as I wouldn't have been able to do anything till this weekend anyway.
Trey I haven't forgot about the shipping difference. I will send that out on Monday.
Buy Direct M-F 9am - 10:30pm EST 1-866-764-1801
Vist our Online Store
+ Reply to Thread
Results 61 to 90 of 98
Thread: SDA 1c Mod Thread
-
08-24-2012 08:13 PM #61
-
08-24-2012 08:51 PM #62
hehe no biggie man! :)
www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
08-25-2012 12:44 PM #63
Ok I got these all back together and when I ran my audyssey it said my right channel is out of phase?? I know I connected everything back per the Polk wiring sheet, but the only thing I was unsure on was the two black wires coming off the board that connect to the inductor. Could I have these wrong?
-
08-25-2012 01:43 PM #64
I don't think those programs work well with SDA's.Ok I got these all back together and when I ran my audyssey it said my right channel is out of phase??
No, it doesn't matter which one goes where.I was unsure on was the two black wires coming off the board that connect to the inductor. Could I have these wrong?'Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
-
08-25-2012 06:17 PM #65
Ok got these bad boys up and running and I am loving it. Some pictiures for all to enjoy.
-
08-25-2012 06:28 PM #66
Awesome! :)
What was the phasing issue??
Be sure to write me a review! :-Dwww.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
08-25-2012 06:49 PM #67
That SDA cable mod is RIDICULOUSLY COOL!!!!
There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
Advice is free, the Flea Market is earned - F1Nut
My Sales Rating > 10
-
08-25-2012 07:11 PM #68
hehe, Jesse had mentioned he was using them on his and whats funny is where I work we use NL4 allllll day and I had never really thought about it. I have used XLR before without issue.
NL2/4 is a very secure, great connection.
Works great for SDA! :)www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
08-25-2012 08:14 PM #69
I will be doing this mod in accordance to my AI-1. Picture just two of those NL connectors on a AI-1. Ohhhh I can't wait.
Originally Posted by VR3
-
08-25-2012 11:51 PM #70
Since it was brought up, here's a little teaser....
'Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
-
08-25-2012 11:54 PM #71
Dude that MIT Shotgun cable is rediculously thick. Is that the actual cable or the wire that splits out of the jacket? (Like just the positive leg)?
Insane! That had to be some $$$ wire.www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
08-25-2012 11:55 PM #72
Also are you using NL4? Curious
www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
08-26-2012 12:05 AM #73
That's the actual cable. Inside are two completely separate runs. We'll leave it at that.
The connector is the NLT4FX, which I had to mill out in order to fit the cable.'Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
-
08-26-2012 11:20 AM #74
Well I have had these up and running for a day now and I will give the feedback I can.
Packaging: Ok so this really has nothing to do with the sound, but man what a great job. Everything was packed well and I have more packing peanuts then I know what to do with.
Build: Everything is top notch. As mentioned the IC cable is really cool. I love the fact that it creates a super secure connection.
Sound: Well I will have to get back to you. First impression is there is just more detail then what my RTA were able to offer. As I told Trey I want these to be my destination speaker and I feel I have that. Now I just need to let them break in for a few hundred hours.
-
08-26-2012 11:40 AM #75
Great to hear bud, burn in is a stout 250 hours :)
I recommend leaving it on repeat at about 70-80db while you are out of the house for like 2 weeks lolwww.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
11-07-2012 11:06 PM #76
Jantzen inductors!
www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
11-08-2012 11:08 AM #77
I just saved that picture as my computer wallpaper. Wow! Great Job!
Polk Audio SDA CRS+ (4.1TL by Trey, Larry's Rings)-
SDA SRS2-Parasound HCA1500ax2/1000
Yamaha xa1000-Celestion SL6S presence,- sl9 surround back
NHTsuper1's surround
Nad2700-sub, AdcomGFA-555 -Magnepan SMG
Parasound 1500pre- Sofia "Baby" tube amp - Monitor Audio Silver RX2
Marantz 2230/B&Kst140- outdoor B&W/Bose/Parasound/KefC75/c40/Polksub
Technics 1200mk2
Gamertag: IslandBerserker
I am but a infinitesimally small point meeting the line of infinity in the SDA universe
-
11-08-2012 01:28 PM #78Member Sales Rating: (0)
- Join Date
- Jan 2010
- Location
- At the golf course eating mushrooms!
- Posts
- 1,131
Trey what are those Jantzen part numbers if you please?
"50% Why... That's almost half."
"I know, I'm sick and need help."
----
www.gimpod.com
----
"The best way to enjoy digital music reproduction is to never listen to good analogue reproduction." ~ Kenneth Swauger
-
11-08-2012 02:24 PM #79
Hey Tony
Shoot me an emailwww.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
11-08-2012 02:51 PM #80
Did you have to mod those? I looked at the Jantzen parts specs and couldn't find inductors that were close matches to original. I've sold my 1C's, but my friend who bought them may be interested.
Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
-
11-08-2012 09:08 PM #81
I had to unwind one, I have a special secret source to obtain Jantzen inductors in 2-3 weeks. I am hiding it to my grave. I would be happy to let him purchase them through me though!
Thanks! :)www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
11-09-2012 08:59 PM #82
Hey Trey I am finishing up my 1C's this weekend with the stock inductors but let me know when you get setup on pricing and on the 2.3Tls if and when you get the proper specs for parts on them.
Originally Posted by VR3
-
11-10-2012 05:10 PM #83
Here is a dumb question, what is taking place when you are doing a burn in ?
Here is another one, when do you know it's time to replace them again?
Originally Posted by VR3
-
11-10-2012 07:08 PM #84
The materials inside the caps are forming thru the charge/discharge cycles.what is taking place when you are doing a burn in ?
Unless something becomes defective, you'll never have to replace tham again.when do you know it's time to replace them again?'Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
-
11-13-2012 03:20 AM #85
Good they are done then!
(SDA1C)
finished them last night
.
Originally Posted by F1nut
-
11-13-2012 09:16 AM #86
Trey, it looks like there is glue blocking one of the mounting holes (the one in the middle bottom) dont know if thats a problem or not.
There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
Advice is free, the Flea Market is earned - F1Nut
My Sales Rating > 10
-
11-13-2012 11:45 AM #87
I think you are confusing Polkieman and myself... ;)
www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
11-13-2012 07:28 PM #88
Yea once I got these together I glued the holes for extra support, sorry if the picture of mine confused someone about their parts.
Originally Posted by VR3
-
12-08-2012 08:50 PM #89
Hmmmmmm!
www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
-
12-09-2012 05:55 PM #90
This turned out pretty good...
Last edited by VR3; 12-09-2012 at 05:58 PM.
www.Vr3Mods.com
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Thread size for thread size for OWM3 Articulating wall mount
By ccutaia in forum Basic Hookup/Wiring QuestionsReplies: 1Last Post: 11-26-2009, 07:38 PM -
Another RCM Thread - KAB EV-1
By Keiko in forum 2 Channel AudioReplies: 11Last Post: 03-13-2009, 08:05 PM -
his is my LAST amp thread for while...
By nooshinjohn in forum ElectronicsReplies: 31Last Post: 03-11-2009, 10:07 AM -
New Thread #2: DID YOU KNOW...?
By Micah Cohen in forum The ClubhouseReplies: 17Last Post: 12-21-2007, 03:01 PM -
my first thread
By michael collins in forum Forum Testing AreaReplies: 7Last Post: 09-30-2006, 11:58 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts