Buy Direct M-F 9am - 10:30pm EST 1-866-764-1801
Vist our Online StoreI thought I'd post some pics of the Fisher 800B i'm working on, (there's also a pioneer sx-820 pictured, replacing leaking capacitorsin power supply).Sorry the pics suck!
It sounds great but I still got a lot of issues to work out. I still need to get my knob brights and dial lights installed too. my big issue is that when playing music from AUX or tuner the volume is inadequate, but through the tape section volume is perfect. Most of my tubes are still original though, so I imagine replacing preamp tubes may fix the issue. This unit was a great find for $30 locally!
![]()
New to the forums, and home theatre.
This will become my secondary system in the fall or spring, but it consists of:
Front: Polk Monitor 40's on 36" Bell-O stands
Front B: Klipsch F-10
Center: Polk CS-2
Rear: Polk Monitor 40's
Subwoofer: Klipsch Sub-12
Receiver: Yamaha HTR-6130
Cd Player: Kenwood Dv-605 dvd player to play data disks.
Macbook pro/External Blu Ray as a HTPC for media.
Some of those early Fishers were really nice, especially the tube units, but also some of the early SS pieces. Don't have any of those in the collection though. But I'm sure mhardy has one somewhere?
cnh
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
"one"? ;-)
(these are the basket cases; I do have one nice one, too)
Last edited by mhardy6647; 08-19-2012 at 05:11 PM.
all the best,
mrh
Originally Posted by SCompRacer;1799606 Can't embed but here is a short youtube video of the table in operation.
[url
SoundOfVoid posted a 13 part series of his LT-5V build here (with a lot of good pics !)
http://www.whatsbestforum.com/showth...-5V-turntable&
MrBigBlueLight
Usually right, but sometimes not entirely factually correct.
Shifting to Plan B
too quiet goin' into labor day...time to awaken this zombie thread...
speeks! ;-)
![]()
Last edited by mhardy6647; 08-31-2012 at 04:03 PM.
all the best,
mrh
ampses and receiverators...
![]()
all the best,
mrh
I'd love to have one of those old Heathkits for the KLH 17s. Would run them off the Jolida, but it's currently spoken for and I don't need as much power to make the Klosses sing!
Just have to keep reminding myself that my father was paying about $50 a month in rent for an apartment back then!
cnh
Last edited by cnh; 08-31-2012 at 06:00 PM.
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
Heathkit made amplifiers from the sublime to the ridiculous ;-)
all the best,
mrh
That big Tandberg is a receiver I could live with.
Finding some of those tube, Bogen separates for home use NIB in somebody's attic wouldn't be the wor$t thing that could happen to a guy.
Last edited by George Grand; 08-31-2012 at 07:21 PM.
As of two weeks ago, I now have a little Tandberg receiver (TR2025) - haven't even had a chance to power it up yet, though...
all the best,
mrh
OK, here's a bad cell phone pic of the latest find. A $10 JVC JR-S201 (tested on my go to speakers bought for almost nothing at RS clearance prices, the Sony MB 150h cheapo bookies--if they blow up, no one cares).
I may run my Wharfdale Denton 2XP (also $10) and a Sony $9 dollar CDP. A system for a whopping $29 dollars that actually sounds OK!
This JVC is much larger than its 23 lbs+ weight warrants. Reminds me of something Mr. Grand said about a vintage Sony a while back! 35 Watts x 2 but it sounds a LOT more powerful than that! And very clean. Elna caps (2 x 6800mf) and a rather heavy tranformer and a couple of Darlington power packs (amp modules), etc.
Not exactly the most attractive receiver. But a "curiosity" in terms of late '70s design. Who can complain at this price.
cnh
Last edited by cnh; 09-06-2012 at 06:37 PM.
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
Here's a generic web shot of the same piece that's out of focus above (a surprising 19 3/4" x 6 1/2" x 15"):
cnh
Last edited by cnh; 09-06-2012 at 06:44 PM.
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
That 201 was the entry level model - which is danged hard to believe when one encounters one of these receivers in the - umm... flesh. They're, as cnh attested, quite large and quite heavy... and the higher-powered models are larger/heavier still. The cosmetics are... unique... but these really were quite respectable receivers, worthy of rescue and probably low-priced today compared to the sexier/more desirable brands of similar vintage.
Now cnh needs the matching cassette deck! :-) OK, this deck was from the previous model year, and thus the cosmetics are a bit different... but still...
![]()
all the best,
mrh
heh... hittin' all around the 201 in my motley collection of doc scans online...
EDIT: Oh, and while I am at it, howzabout some meta-vintage hifi, sort of? I have some weird things around the house...
![]()
Last edited by mhardy6647; 09-06-2012 at 08:32 PM.
all the best,
mrh
A clean up of the office is in order here.
What you see on the floor is an HK 430 hooked to the Dynaco A25s which have Wharfdale Denton 2 (something or other) on top. Under the HK is a Technics SA-5570 which is running some RSL 40s behind the Dynacos. In the distance my JBL L80ts with a glimmer of the LSi-7s sitting on them. The stack next to it: Adcom GFA-545, Nak pre-amp in sig, and the Pioneer 51fd blu-ray player. The old school TV is a 27" Proscan. I'm moving things around, rotating things in and out. There are racks to the right that you cannot see, mostly of the industrial variety. And a wire mess that needs attention. Oh, an old Sony CDP I got for $9 sits above the HK 430.
I have to borrow my wife's upscale camera! On the other side of this messy floor, an L shaped desk with a couple of unfinished manuscripts on it, works in progress and probably a paper extravaganza. Music, books and papers--could be an autobiographical title, there!
cnh
Last edited by cnh; 09-07-2012 at 05:38 PM.
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
Here is some vintage audio for ya :)
Hello Kitty am/fm CD player
Some nice stuff above. Actually I have a set of storage shelves very much like yours to the right of my pic above loaded with a number of other vintage pieces.
Time to move a few things?
cnh
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
Here is my Scott LK-48 which was rebuilt by NOSValves. Sounds good!
![]()
That's a very nice looking piece, PreCd! What speakers do you power with it?
cnh
GOT POLK?
HT-Basement system #2: RTi-A3s, CSi-3, RTi-4s, PSW 12, Sony BDP-S1000ES, Denon AVR 2807 (Onkyo TX-SR 805 System #1 HT AVR)
Office Two Channel: LSi-7s (Nakamichi CA-5, NAD 214 [or, Adcom GFA-545], Pioneer BDP51fd, HK HD990)
Vintage Polks: Polk Monitor 5As, Monitor 10As, SDA-2Bs (Jolida JD-303, Jolida Music Van)
Shape of Polks to come: LSiM series
all the best,
mrh
I'm not sure if this counts but I just got these and a pair of DQ10's
Yamaha M-4's and a C-4
HT: M5510-Prox2/PN51E550/NR708/M282(3)/RTi A7/CSi A6/FXi A6/DSWPro660x2/PS3/HTPC
Office: Belkin PF60/PN43E450/Marantz 1501/PSB 400/Image C4/WD Live TV
2-Channel: Yamaha C4/M4(2)/DQ-10's/DQ-1w(2)/SBT/Pioneer R2Rl/Technics SL-7/AR EB101
Desk: QSC RMX850/Behringer B2030P
Yup, definitely counts :-) Nice stuff. If the Yamahas are in good working order, they'd be well worth trying on the DQ-10s, I'd opine.
all the best,
mrh
Everything works on the amp/preamp, i just need to put in some new lights for the buttons since a couple of them burned out. I'm thinking about swapping out the terminals for binding posts on the M-4's.
HT: M5510-Prox2/PN51E550/NR708/M282(3)/RTi A7/CSi A6/FXi A6/DSWPro660x2/PS3/HTPC
Office: Belkin PF60/PN43E450/Marantz 1501/PSB 400/Image C4/WD Live TV
2-Channel: Yamaha C4/M4(2)/DQ-10's/DQ-1w(2)/SBT/Pioneer R2Rl/Technics SL-7/AR EB101
Desk: QSC RMX850/Behringer B2030P
Speakers: mains/2ch:SDA2a, surrounds-Monitor Series 7, center-CS350-LS, sub-Atlantic Technologies 172 PBM
Control: AVR:Denon AVR 2106 powering surrounds and center(HT) pre: B&K PRO-10MC(2ch)
Amps:Parasound HCA 1000a powering mains(2ch/HT)
Sources: Oppo DV-970HD(2ch/HT), Xbox360(HT), PS2(HT), Wii(HT), Kenwood KT-5300(2ch)
Cables:Philips/RCA/Monster
Life's short, Listen to SDA's
Life's short, Listen to SDA's
Where did SOPA go?
This is my brothers amp (said mine but not, wish it was). He left it with me while away for a month or two, don't know if I will let him have it back. In saying that I did not get a chance to hear it before hand. It sounds great. I am used to a Adcom GFA-555 and this is very different. It has a much greater sound stage and a more refined sound of course. Not as much punch as the Adcom but I rarely listen to music at great levels anymore know what I mean.
All the Scott tube gear I have heard is just awe inspiring not to mention some of the quietest phono stages I have heard. Was wondering when your brother had it done because I might have had my ears on it.
Finished one of the s-5000 yesterday, also had a hand in the first biasing mods we have done for one.
Also got a visitor burning in for the weekend.
It is playing with a cd player, the parasound and mains in my sig.
Speakers: mains/2ch:SDA2a, surrounds-Monitor Series 7, center-CS350-LS, sub-Atlantic Technologies 172 PBM
Control: AVR:Denon AVR 2106 powering surrounds and center(HT) pre: B&K PRO-10MC(2ch)
Amps:Parasound HCA 1000a powering mains(2ch/HT)
Sources: Oppo DV-970HD(2ch/HT), Xbox360(HT), PS2(HT), Wii(HT), Kenwood KT-5300(2ch)
Cables:Philips/RCA/Monster
Life's short, Listen to SDA's
Life's short, Listen to SDA's
Where did SOPA go?
double post
Last edited by dudeinaroom; 09-14-2012 at 11:43 PM.
Speakers: mains/2ch:SDA2a, surrounds-Monitor Series 7, center-CS350-LS, sub-Atlantic Technologies 172 PBM
Control: AVR:Denon AVR 2106 powering surrounds and center(HT) pre: B&K PRO-10MC(2ch)
Amps:Parasound HCA 1000a powering mains(2ch/HT)
Sources: Oppo DV-970HD(2ch/HT), Xbox360(HT), PS2(HT), Wii(HT), Kenwood KT-5300(2ch)
Cables:Philips/RCA/Monster
Life's short, Listen to SDA's
Life's short, Listen to SDA's
Where did SOPA go?
There are currently 1 users browsing this thread. (0 members and 1 guests)