Anyone try the Pangea usb?
they also have a .5 for 20$
You should put your money in a Weller WES-51 solder station Dan (especially how many cables you deal with :).
If you opt for the USB with no power (which is the route I would travel), you could easily make your own
USB provided you can find some good connectors (which is the problem).
Not that the one with power would be a problem either, your only dealing with 5v.
Just a matter of running a digital signal (which in the case of usb is data packet transfer) along with power
in such close proximity bothers me.
If I could exclude the power in such a small cable, I certainly would.
Shielding can only do so much unless you double or triple shield (then the cable gets bigger and bigger).
Computer usb power IMHO has more "grunge" than most any other power supply, which is why most do not consider usb as a
viable "audiophile" connection.
If you had the solder station, you could also build a better power supply for the dac.
Buy a kit with board and instructions, and upgrade the surface components, or just the schematics for one, and
Alittle patience, a good solder station and your there for the price of a "overpriced" USB cable!
Anyone have a lead on some "good" usb connectors?
Keep in mind Dan, if you go the "non powered route" it is a single tasker.
Meaning you cannot really use it on anything that requires usb power.
My plans were to build a usb cable that includes a 3.5mm power supply at the B side.
Thus the power does not run parallel to the digital signal.
The power would only be plugged in right at "load" side.
Never seen one like it, and don't really care if someone steals the idea at this point considering,
I have been wanting to build one for over a year now with no results :).
Its a good idea though becuase it would be a "multi tasker".
You need usb power? Plug the power in, if not leave the power unplugged.
this post (specs here). I dont think I need an upgraded power supply for this puppy , its got more than enough to throw down on just about anything. An upgraded Pepster powercable later on, more than likely however
Attachment 74257 Attachment 74258 Attachment 74259
wireworld cables initially because while they do have both power and signal they are totally separated and isolated within the actual cable. So I could use it to power devices as well if I wanted to.
Last edited by EndersShadow; 08-22-2012 at 09:41 PM.
There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If youre lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
Advice is free, the Flea Market is earned - F1Nut
HT: H15 -> Pio 51FD, 360, Uverse -> DTR 5.9 -> AV-705x + M1.0t -> LSi15, C, 7
2 Channel = PC -> DacMagic + Debut III -> TGP-II -> HCA-750II -> RTA 11TL
There are currently 1 users browsing this thread. (0 members and 1 guests)