Free Shipping on All Orders 1-866-764-1801

Vist our Online Store
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Member Sales Rating: (0)

    Join Date
    Dec 2012
    Posts
    78

    Default Setting on PSW505

    Just had some questions about my new sub that was hoping to get answered on here...

    The PSW505 has 3 settings on the back standby, auto and on.

    I am trying to figure out what each of these actually does....will standby power the sub off after a certain amount of time has passed after the receiver has been powered off?

  2. #2

    Member Sales Rating: (0)

    Join Date
    Jul 2012
    Location
    central Texas, trailer court on right
    Posts
    746

    Default

    If you want to turn on when the AVR/reciever is powered up, set to auto. It will turn off after about 20 minutes of no signal being recieved. The on setting is always on, while the standby can be thought of as sort-of off. The sub will ignore the signal being sent to it.

  3. #3

    Member Sales Rating: (0)

    Join Date
    Dec 2012
    Posts
    78

    Default

    Quote Originally Posted by rpf65 View Post
    If you want to turn on when the AVR/reciever is powered up, set to auto. It will turn off after about 20 minutes of no signal being recieved. The on setting is always on, while the standby can be thought of as sort-of off. The sub will ignore the signal being sent to it.
    Excellent auto it is!

    Thanks.

  4. #4

    Member Sales Rating: (0)

    Join Date
    Jan 2011
    Location
    Along the Eastern shore of Lake Michigan
    Posts
    732

    Default

    i HAVE 3 Polk subs in use in the house and they are all set to auto. good luck
    Main Family Room: Sony 46 LCD, Sony Blue Ray, Sony DVD/VCR combo,Onkyo TXNR 708, Parasound 5250,
    Polk SDS-SRS with mods, CSI 5 center + Klipsch SC2, Polk RT2000P rears, Klipsch KG 1.5's sides, Polk Micro Pro 1000, Polk Micro Pro 2000, Polk SW505, Belkin PF60, Signal Cable Classics,Monster IC's, 2 15 amp circuits & 1 20 amp circuit.

    Living Room: Belkin PF60, Parasound HCA2200, MIT ProlineEXP balanced IC's,Emotiva XDA-1 DAC/Pre,Emotiva ERC2 transport,MIT AVT2, Polk LSI 9's.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Replies: 4
    Last Post: 12-14-2010, 05:30 PM
  2. Need Help REceiver setting for PSW505
    By kaku42 in forum Subwoofer Hookup & Bass Management
    Replies: 6
    Last Post: 01-19-2010, 03:25 AM
  3. Setting up NEW with OLD
    By pamnyc2008 in forum Basic Hookup/Wiring Questions
    Replies: 1
    Last Post: 11-29-2007, 04:35 PM
  4. ISonic Alarm setting ?? also time setting problem
    By dreamss in forum Troubleshooting
    Replies: 5
    Last Post: 05-11-2007, 12:31 PM
  5. Frequency setting for the PSW505 (LFE)?
    By aat in forum Subwoofer Hookup & Bass Management
    Replies: 2
    Last Post: 04-11-2006, 11:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts